command function
The display cpu-usage command is used to view the statistics and configuration information of cpu utilization.
Command format
Display cpu usage [Configuration | Slave | Slot Slot id]
Parameter description
Configuration: View the configuration information of CPU utilization.
Slave: displays the CPU occupancy information of the standby main control board.
Slotslot-id: specifies the interface board number.
==================================================
View memory:
command function
The display memory-usage command is used to view s9300 &; Memory usage information of S9300E device.
Command format
Display memory usage [slot slot-id]
Parameter description
From: Displays the memory information of the standby main control board.
Slot-id: displays the memory information of the specified interface board.
=====================================================
Or use: show health.
command function
The display health command is used to view s9300 &; Health status of S9300E system, including CF card \ flash memory occupation, CPU occupation, memory occupation, power supply status, fan status, voltage and temperature.
=====================================================
Bandwidth utilization: display interface commands
For example, display interface Gigabit Ethernet 3/0/0, and then look at the following two parameters:
Input Bandwidth Utilization: Enter the Bandwidth Utilization.
Output bandwidth utilization: output bandwidth utilization.
Or: display interface brief commands.
It is used to view the brief information of the interface status and configuration, including the physical status and protocol status of the interface, the bandwidth utilization rate of the receiving direction in the recent period, the bandwidth utilization rate of the sending direction in the recent period, the number of error messages received and the number of error messages sent.
Look at these two parameters:
InUti: the average bandwidth utilization of the interface receiving direction in the last 5 minutes.
OutUti: the average bandwidth utilization in the last 5 minutes in the sending direction of the interface.
Go to Huawei's support website to download the 9300 command-line manual. There are examples in it.