The first thing to do is to open the window for ventilation and take away the indoor moisture through the circulation of air. But be careful not to ventilate at noon, because the air humidity is relatively high at noon, and ventilation will make the room humid at this time. You can choose the drying time. Generally, the air is dry in the afternoon, so you can choose to open the window for ventilation in the afternoon to make the room dry.
If there is an air conditioner in the room, you can turn on the air conditioner, take away the air through the air conditioner and absorb the moisture in the room. It is best to open the wardrobe door when the air conditioner is turned on, so that the indoor moisture can be fully discharged, which takes about half an hour. Close the doors and windows of the room in rainy days, and the humidity will be higher in rainy days. If the doors and windows are not properly closed, a lot of moisture will enter the room, making it more humid.
If the room is humid, you can also buy some desiccants such as quicklime and bamboo charcoal to absorb water. Sprinkle quicklime and bamboo charcoal on corners and damp corners. Regular cleaning and replacement of quicklime and bamboo charcoal can effectively remove indoor moisture. The room is too humid. In addition to desiccant dehumidification, indoor moisture can also be removed by dehumidifier, and the dehumidification effect is also very good.
The installation of fresh air dehumidification system means that the fresh air dehumidification host reaches all indoor rooms through pipes, dehumidifies or ventilates all rooms according to the needs of different seasons, which can realize centralized dehumidification and ventilation, and automatically dehumidifies according to the humidity value set by customers without manual duty. At the same time, it has the function of purifying air during circulating dehumidification, so that the air in the living space is fresh and the humidity is suitable.
To heighten the moistureproof layer on the ground, whether it is the basement or the first floor, the better way to effectively prevent moisture is to redo the ground, that is, to remove the original ground and heighten it to make the moistureproof layer. If the space of the house is high, the moistureproof layer should be properly raised. The farther away from the soil layer, the better the moisture-proof effect.
Choose high-quality bricks for the ground. In a damp house, it is best not to use wooden floors, because the humidity is serious and the wooden floors are easy to corrode, leading to decay. Ceramic tiles with low water absorption and thick glaze layer will also increase moisture resistance to some extent and have good anti-skid effect. Adding moisture-proof layer can achieve good results.
If space permits, it's best to build another wall on the basis of waterproof layer. The larger the widening area of the wall, the better its moisture-proof performance.
Use less wood for bathroom decoration. Wooden materials should be avoided in bathroom decoration, and waterproof aluminum floor with anti-collision strips should be used in bathroom furniture. When installing pipes, the exposed pipes should be painted with antirust paint, and the concealed pipes should be painted with antirust paint. The water supply pipeline is closely connected with accessories and instruments, and there is no leakage when testing water. The floor drain design is still dominated by upper and lower sewer pipes, and the surface is slightly lower than the ground. When laying walls, floor tiles and stone materials, waterproof layers should be made under the surface layer and coated with waterproof materials.