How to deal with the state detection error of NVMe hard disk under Win 10 system?

How to deal with the state detection error of Nvme hard disk under Win 10 system in NVMe solid state hard disk installation system CrystalDiskInfo is an application program that supports the detection of HDD/SSD hard disk information and health monitoring. Support to display the basic information of hard disk, monitor S.M.A.R.T technology and the temperature of disk. The software also supports listing S.M.A.R.T data information. At the same time, it also provides a health assessment based on the current intelligent state of the disk drive, including the disk center temperature. When various factors approach the threshold of danger level, CrystalDiskInfo will warn users to back up their personal data in time just in case. After all, the data is priceless and the hard disk is valuable.

What should I do if I have a hard disk self-check after installing the solid state hard disk system? Do not use a mirror version of the gho system. There may be various problems. It is better to use the original iso of msdn to install a USB flash drive boot system.

Does nvme protocol SSD support pe installation system? . For the solid-state hard disk of NVMe protocol, if you want to install the operating system with the U disk tool of PE system, you need to open the option independent variable supporting NVMe SSD in the BIOS of the motherboard, and then use the U disk of the PE system driven by NVMe to start the computer into the U disk PE system environment and install the operating system. In other words, the USB flash drive of PE system without NVME driver can't recognize SSD, so what about the installation system?

Win 10 how to install the system on the hard disk and download the operating system image file to be installed on the system website.

After downloading, right-click the image file-extract it to drive D.

Just perform the hard disk installation internally.

Wait patiently for the installation to complete.

What should I do if I run out of memory when installing Win 10 system on SSD? There is generally no shortage of memory. Is the partition slot of disk C too small? If so, it is recommended that you use PE to re-split the slot, or use the system installation disk to delete the split slot and rebuild it.

What if the installation system win 10 doesn't display the SSD? The boot of SSD is not done well. Go to PE or your other system to repair SSD boot.

How can win 10 with SSD recharge the windows 10 system, as long as it has been successfully enabled on this device? Then use the official Microsoft software directly. Make DVD discs or USB flash drives. Then install the system in the SSD. Windows 10 system will be automatically enabled or networked.

AHCI hard disk mode must be turned on in the bios of the motherboard before installing windows 10 system. Solid state drives must conform to the 4K standard. Otherwise, SSD will affect performance.

Gho file how to install system disk on SSD Advantages of SSD

1. Start quickly, and there is no process of motor accelerating rotation.

2. No magnetic head, fast random reading and minimum reading delay. According to related tests, under the same computer configuration, it only takes 18 seconds for a notebook with solid-state hard disk to appear on the desktop, while it takes 3 1 second for a notebook with traditional hard disk, almost half the difference.

3. Relatively fixed reading time. Because the addressing time is independent of the data storage location, disk fragmentation will not affect the reading time.

4. The writing speed of solid-state hard disk based on DRAM is extremely fast.

5. There is no noise. Because there is no mechanical motor and fan, the noise value is 0 decibel when working. Some high-end or large-capacity products are equipped with fans, so it will still produce noise.

6. Low-capacity solid state drives based on flash memory have low energy consumption and calorific value, but high-end or large-capacity products have high energy consumption.

7. Durable, shockproof and fall-resistant. There are no mechanical moving parts inside, so there will be no mechanical failure and no fear of collision, impact and vibration. In this way, even if the notebook computer moves at high speed or even falls over, it will not affect the normal use, and the possibility of data loss can be minimized when the notebook computer accidentally falls or collides with hard objects.

8. Wider operating temperature range. A typical hard disk drive can only work in the range of 5 to 55 degrees Celsius. Most SSDs can work at-10~70 degrees Celsius, and some industrial SSDs can also work at -40~85 degrees Celsius or even higher.

9. Low-capacity SSDs are smaller and lighter than those with the same capacity. However, this advantage gradually weakens with the increase of capacity. Up to 256GB, SSD is still lighter than ordinary hard disk with the same capacity.

Disadvantages of solid-state hard disk

1. The cost is too high.

Although the performance of SSD has reached or even surpassed the traditional mechanical hard disk, and it is also above the latter in terms of stability, power consumption and thermal control, there is no trend of popularization so far. It can be said that the high cost of SSD has become the biggest obstacle to the disk performance revolution.

2. The standards are not uniform

At present, there is no unified reference number for solid state drives, and the performance of different brands of products varies greatly, so the prices vary greatly. It is not conducive to the popularization of solid-state hard disks.

3. Small storage capacity

The small storage capacity of a single hard disk is also a big problem that puzzles the development of solid-state hard disks. Now the traditional mechanical hard disk has moved to TB level with the latest vertical recording technology.

Asus x454 can be installed in the solid-state hard disk installation system. If your machine has an optical drive, it is recommended to buy an optical drive bracket and install it in the position of the optical drive. If not, it is recommended to open the back cover to see if there is a reserved sata or msata or M.2 interface. If you have it, you can buy the corresponding solid-state direct drive. If not, please take out the original mechanical disk and install it in place.

In addition, in order to reduce costs, some manufacturers now use TLC particles as SSD. If I want to choose an entry-level SSD, I have used Tektronix K2 MLC granules for several months, and I feel ok.

If you install the system, there are many resources on the Internet. Baidu downloads a USB flash drive installation system. You can buy a USB flash drive to download. Just enter the bios and set the USB flash drive as the first startup disk.

How to install Samsung's solid-state hard disk system? The SSD hard disk that comes with Samsung's double disk notebook can only be used as the system cache, which means it will be called when reading files to improve the reading speed. It is not a separate hard disk storage space, so it cannot be used for system installation.