First, how to use the smart toilet
1. There are seven buttons on the operation panel of the smart toilet, which are power supply, drying, female cleaning, massage, stop, hip cleaning, and are for men and women only. The power switch shows a red light, the function light flashes all the time, and the buzzer has three buttons: power, drying and exit.
2. After the smart toilet is powered on, it will automatically turn on the seat heating function. If heating is not needed, you can press the close button.
3. The smart toilet has a cleaning function. Before cleaning, it is necessary to keep the nozzle about 500px away from the human body, and then press the open button to spray water for cleaning. After the nozzle comes out of the water, wipe the inner edge of the nozzle clockwise with a soft towel to prevent long-term extrusion from hindering water injection.
4. Some smart toilets have their own warm air drying function. After cleaning, you can choose the warm air drying function to dry the toilet seat, so that you can keep it clean without feeling wet.
5. If there is no heating at home or the warm air drying is not enough, you can choose to press the "hand drying" or "drying" button on the remote control, and then the toilet will turn on the warm air drying function.
Second, the precautions for smart toilets
1. Press the "buttock cleaning" button or the "buttock cleaning" button of the remote control after going to the toilet, and the buttock cleaning nozzle will automatically stop spraying at a fixed position for one minute. This function is particularly friendly to women.
2. It is easy to waste water by washing all the time. If the water level in the hip bath is insufficient, the buzzer will sound to remind you. When the water level returns to the initial state, the automatic flushing function can be used again.
3. After washing, the lid will close by itself, so don't worry that the toilet lid will be exposed. In addition, if you encounter any problems during use, you can press the stop button to stop the operation.
4. The nozzle position of the smart toilet is about 500px away from the human body, and you can press the button to spray water for cleaning. After the nozzle comes out of the water, wipe the inner edge of the nozzle clockwise with a soft towel to prevent long-term extrusion from hindering water injection.
5. Some smart toilets have their own warm air drying function. After cleaning, you can choose the warm air drying function to dry the toilet seat, so that you can keep it clean without feeling wet.
6. When the remote controller is operated, if it is pressed for more than 5 seconds, the stop button will stop forcibly, which can directly cut off the power supply of the whole machine. This operation cannot be operated in power-off mode, and the operation instructions of the remote controller will not be executed during power-off operation, and it needs to be powered on again to operate.
Development and Significance of Intelligent Toilet
First, the development of intelligent toilets
From the earliest regenerative intelligent toilet to the present instant intelligent toilet, its development has witnessed the progress of science and technology and the improvement of people's living standards. Especially in recent years, with the continuous improvement of people's pursuit of quality of life and the change of consumption concept, smart toilets have been welcomed by more and more people.
Second, the significance of smart toilets
The emergence of smart toilets not only brings people a more comfortable and convenient toilet experience, but also helps to improve the quality of life and health. For example, its own cleaning function can effectively reduce the use of toilet paper and save resources.
Its warm air drying function can make people no longer feel cold when they go to the toilet in cold winter. In addition, the automatic sensing function of the smart toilet can also avoid bacterial cross-infection caused by manual switch.