If there is special abnormal noise in the operation of the oxygen generator at home, you can check whether the cable tie at the bottom of the oxygen generator has been removed. If the cable tie is still there, please cut it off with scissors.
If the oxygen generator is placed for a long time, the wear of the compressor will increase. At this time, the noise of the oxygen generator will be very loud. Generally, after 20 minutes, the noise will gradually disappear. If the abnormal noise persists, you should contact the dealer for home maintenance.
The oxygen generator will vibrate during operation. If placed on a hollow desktop or floor, the vibration will aggravate the noise, so the oxygen generator at home must be placed on a solid surface.
2. Control the spread of noise
Generally, the noise of the oxygen generator at home is fixed. If you are sensitive to noise, you can consider choosing a longer oxygen tube, so that you can put the oxygen generator farther away and the noise will naturally be less. At present, the longest oxygen tube that can be used by the oxygen generator can reach 15 meters, so it is completely possible to put the oxygen generator in another room, so that almost no sound can be heard. At present, many oxygen generators are equipped with remote controllers, which can remotely control the operation and stop of the oxygen generators as long as they lie in bed, so that the elderly who are inconvenient can easily control the oxygen generators.