Every employee must have absolute control over the padlock he uses. Employees are not allowed to open other people's locks at the same time;
3. Tag-out/locking device shall be suitable for use environment (corrosiveness, humidity, etc.). );
4. More locks and scissors are used for multi-person operation to ensure that each operator can effectively control energy.
5. Operations that can be locked by energy must be locked, and operations that can be locked by multiple people must be locked by multiple people. Only when the conditions are limited and it is impossible to complete, can the safety measures of personnel supervision and listing be arranged simultaneously. If it is not possible to carry out personnel monitoring and listing at the same time, the supervisor and safety engineer must be informed to support the completion of safety measures.
6. When the energy is locked, turned off and started, the state of the energy must be verified, and the next operation can be carried out only after the safety is confirmed. For the equipment being debugged, the electricity should be fulfilled before contact.
Legal basis: Civil Code of People's Republic of China (PRC).
Article 1202 Where a product defect causes damage to others, the producer shall bear the tort liability.
Article 1203 Where a defect in a product causes damage to others, the infringed party may claim compensation from the producer or seller of the product. If the product defect is caused by the producer, the seller has the right to recover from the producer after compensation. If the product is defective due to the fault of the seller, the producer has the right to recover from the seller after compensation.
Article 1204 Where a product is defective due to the fault of a third party, such as the carrier or the warehouse, causing damage to others, the producer or seller of the product shall have the right to claim compensation from the third party after making compensation.
Article 125 Where a product defect endangers the personal and property safety of others, the infringed party has the right to demand the producer or seller to bear the tort liability of stopping the infringement, removing the obstruction and eliminating the danger.
Article 126 If a product is found to be defective after it is put into circulation, the producer and seller shall take remedial measures such as stopping selling, warning and recalling in time; If remedial measures are not taken in time or ineffective remedial measures lead to the expansion of damage, it shall also bear tort liability for the expanded damage. Where recall measures are taken in accordance with the provisions of the preceding paragraph, the producers and sellers shall bear the necessary expenses incurred by the infringed.
Article 1207 Where a product is produced and sold knowing that it is defective, or effective remedial measures are not taken in accordance with the provisions of the preceding article, resulting in the death of others or serious damage to health, the infringed party has the right to demand corresponding punitive damages.