What will happen if the occupational hazard factors fail to pass the test?

According to OHSAS occupational health and safety system and national occupational disease prevention and control law, it is necessary to implement corresponding occupational hazards improvement, and eliminate and control occupational hazards in the workplace through technical means and personal protective equipment configuration. If it cannot be eliminated, the occupational hazards should be controlled within an acceptable range. If the test is unqualified, it is necessary to make improvements and countermeasures until it reaches the limit required by the national standard. If you don't improve, there are several situations:

1.OHSAS occupational health and safety system external audit has major nonconformities, which need to be rectified and meet the requirements before obtaining the certificate;

2. The safety supervision department found that there were occupational hazards in the factory during supervision, and asked the factory to rectify and punish it according to laws and regulations;

The worst result is occupational hazards. If employees have occupational hazards and report them to the local safety supervision department, the safety supervision department will return to the factory for investigation. Once it is confirmed as an occupational disease, it is possible to punish it according to the severity of the harm, and in severe cases, it will be ordered to stop production and rectify.