Through this pile of chargers, we can find that they all have one thing in common: they are all single-port chargers, and their biggest difference is that there are few charging protocols, which can be said to be "special for special planes". Of course, they can also charge other devices, but the charging speed is very slow, and the snail-like charging efficiency makes my "charging anxiety" relapse! ! !
Before choosing a charger, you need to consider the following points:
1. The quality of non-original charger is not good, so don't choose non-original charger.
The "non-original charger" here refers to a third-party brand charger other than the original one, rather than a miscellaneous brand high imitation charger. Although the original charger is customized according to supporting products and equipment, it is guaranteed in all aspects of quality control and safety. But at present, many third-party charger brands, such as the world's number one Anke, actually use the same original component manufacturer, and the quality and quality control can reach or even exceed the original level. Moreover, the third-party charger is more comprehensive in the support protocol, and also supports multi-device charging, so that one charger can meet the needs of multi-device charging at the same time. Moreover, since mobile phone manufacturers canceled giving away accessories, more and more people began to recognize non-original chargers, and the price will be much more affordable than the original chargers.
2. The fast charging charger will damage the battery.
No, the so-called loss is just the normal loss of mobile phone batteries. At present, we use a regular fast-charging charger, which has passed the national 3C certification and is safe and secure. If it is an inferior charger with inferior brand and high imitation, it is likely to hurt the battery, because those inferior chargers cut corners on electronic components and have no stable electronic components, resulting in unstable charging current.
3. Recharge when the power is lower than 20%.
Life is fast, many friends forget to charge when they are busy, and even turn off their phones automatically before charging, which is also wrong. Keeping 30%-80% power in the mobile phone can make the battery more durable. When the power is less than 20%, you should charge your mobile phone in time to avoid low power when charging. Lithium-ion batteries for mobile phones have the charging characteristics of "eat more meals and eat less". Multiple small charges can keep the battery healthy for a long time than a quick charge. This charging method will also increase the number of cycles of the battery.
As a digital blogger, I used to prepare a charger for every device at home or when I went out. Not only was my backpack "bulging" when I went out, but even the sockets of my home patch panel were full in the company. In order to reduce the burden on the backpack and truly realize "charging subtraction and safe addition", only one charger is brought to solve the charging problem of all devices, so consider choosing a charger that supports multi-port fast charging.
Anker 65W three-port super charger adopts ultra-high density design, has three socket configurations, and is equipped with 2C 1A "tiger balm" interface, which can meet the charging requirements of PD fast charging and digital products with different fast charging protocols. Both USB-C interfaces support blind insertion, and the maximum output power of separate insertion can reach 65W. It can provide full-power fast charging for large digital devices such as notebooks and tablets without distinguishing fast charging ports. One-time performance solves the charging problem of three devices, so it is enough to take this when going out for business.
Anker's super-charged packaging design continues its long-standing white and blue design style, with dark lines printed on the box and detailed performance parameters printed on the back of the package, which supports 18-month maintenance-free replacement and new warranty.
Performance parameters of Anker 65W three-port supercapacitor:
Anker Anke 65W three-port overcharge design, full of sense of science and technology, similar to the spacesuit-like design, very beautiful! The whole appearance is coated with a layer, which is understood to improve the skin-friendly feeling by spraying aviation-grade hand paint. Maybe many people here will question, isn't it a leather-like coating? In fact, they all achieve the same skin-like feeling, but there are still great differences. The biggest common fault of the previous imitation leather coating will be that the coating will become very sticky after a long time, and the touch will be greatly reduced!
Aviation-grade hand paint not only achieves skin-friendly touch on the hand, but also improves the common skin-like coating, which increases the excellent corrosion resistance and will not make the hand paint fall off because of sweat and dust on our hands. Hand-feel paint is often used in the outer protective film of aircraft, and the safety level of aircraft is very strict, so the durability of aviation-grade hand-feel paint is very high.
360 gallium nitride 65W weight: 153g
Zendure SuperPort S3 Weight: 120g
Anker 65W three-port super charger weighs only 105g. Compared with the same type of 65W charger, it is smaller and lighter. Don't underestimate a few grams of simple weight loss, it can really make what you carry with you feel lighter. The advantages of Anker 65W three-port super charger are attributed to the multi-layer stacked power supply technology:
Through the optimization of internal hardware layout, the space utilization rate is improved and the heat dissipation performance is better. To put it simply, Anker's second-generation gallium nitride technology really uses black technology to achieve the ultimate charger: small size, high power and multi-device fast charging, and low calorific value.
Anker 65W three-port super charger, as a very compatible product, can replace the power supply of most digital products. It allows users to bid farewell to the bulky original DC power adapter of the notebook and carry it with them.
Anker Anke 65W three-port supercharger is equipped with Anke Anke's unique technology: Power IQ 3.0, which is independently developed by Anke Anke Company. It intelligently identifies the devices connected to each interface, automatically adjusts the current output, and provides the fastest and most stable charging for the devices. All interfaces are automatically matched with technologies such as full-speed charging and intelligent voltage drop compensation. Power IQ 3.0 ensures the safe and fast charging of the battery of the device and improves the service life of the battery, especially for iPhone users. There is no need to be afraid that fast charging will reduce the battery health rate.
Anker 65W three-port super charger uses folding pins, which is really practical, especially suitable for office workers and students. Because work and study need to carry a notebook computer frequently, the charger is also one of the things you carry with you. After putting the charger with folded pins into the bag, you don't have to worry that the pins will scratch other items in the bag. There is also a detailed parameter nameplate of this charger on the needle surface.
The biggest advantage of the design of Anker 65W three-port super-charged compact cube is that when the charger is inserted into the patch panel, it will not affect the use of the left and right sockets in the horizontal direction, and the reserved space is large, so that the conventional patch panel can be used to every socket to the maximum extent.
Use voltmeter and ammeter to test USB-C 1 and USB-C2 interfaces. The charging protocols supported by these two interfaces are the same: PD2.0 65W(3.0A), PD3.0 PPS 52W(3.30~ 16.0V), Apple 5V/2.4A, Samsung 5V/2A, BC 1.2, QC4+3.0 (5V/9V/. 12V 25W), Huawei FCP(5V/9V/ 12V 24W), SCP 25W(3.4~5.5V 5.0A).
USB-C 1 and USB-C2 interfaces, and the detected output voltage supports four fixed voltage levels+1 PPS, namely 5V/3.0A, 9V/3.0A, 15V/3.0A, 20V/3.25A and 3.30 ~ 65433.
The charging protocols supported by USB-A interface are: Apple 5V/2.4A, Samsung 5V/2A, BC 1.2, QC3.0(5V/9V/ 12V), Samsung AFC(5V/9V/ 12V 25W) and Huawei FCP (5v).
After measuring the electric meter, we can see the comprehensive performance of Anker 65W three-port super charger. Besides using GaN technology, it also shows its advantages in volume and weight. Support mainstream charging protocols such as USB-C PD 3.0 and PPS, as well as Apple2.4A and BC 1.2 charging protocols that support old equipment. It can be seen that it has high cost performance and strong compatibility. This charger also supports 3PPS charging protocol.
PPS can simplify the hardware design of the receiver, because the output voltage of PPS can be as low as 3V, so the power supply can directly charge the battery at the receiver, which saves the subsequent power conversion at the receiver. This not only improves the charging efficiency, but also significantly reduces the degree of heat generated by the power receiving device during charging.
Single port charging efficiency
The LG gram notebook computer supports the fast charging protocol of PD, with the instant reading efficiency of19.69V/2.14A/42.23W and the operating voltage range of 20V/3.25A The charging protocol of PD2.0 has been successfully recognized. The charging efficiency is basically the same as that of LG gram's standard DC charger. The computer is equipped with a 72Wh high-performance lithium battery, which can be charged from 0% for 30 minutes and can be charged to about 42%. If your friend's laptop supports PD charging, you must choose a high-power PD charger above 45 W. Otherwise, charging will be slow or power consumption will be faster than charging speed.
The instantaneous reading efficiency of reverse charging is19.55v/3.15a/61.80w, and the voltage range is 20V/3.25A The charging protocol of PD2.0 has been successfully identified. At present, when traveling, I will carry a two-way PD fast charging mobile power supply with Anker 65W three-port super charging combination, so there is no power anxiety when traveling. The 26800mAh 96.48Wh mobile power supply is fully charged, which only takes about 1 hour for 40 minutes, and the charging efficiency is very fast.
What I understand most is that the mobile power supply I used before does not support fast charging and there is no fast charging charger. Traveling with a group, when you wake up, the hotel is not full, and you will be kicked out by the tour guide. Anker 65W three-port super charging can greatly shorten the charging time, improve the charging efficiency, and is no longer afraid of being in a hurry.
When the ambient temperature is 24, the relative calorific value of the two-way PD fast charging mobile power supply is well controlled. We can see the excellent side of Anker technology, which can keep low calorific value continuously when charging at full load and fast, and the highest temperature is controlled at around 44.7, which is just warm to the touch.
Whether the charger works well depends on the quality of the components used internally. The core components used by Anker Anke are very high quality controlled, which come from the top brands in the spare parts industry and are also used in the products of top technology companies such as Apple, Huawei, Tesla and DJI.
When iPhone 13 Pro Max is charged, the instantaneous reading efficiency is 8.67V/2.93A/25.47W. Using the voltage range of 9V/3.0A, the charging protocol of PD2.0 has been successfully recognized. This year's iPhone 13 Pro Max has supported the instantaneous peak value of charging to about 27W.
The above picture shows the charging efficiency of charging iPhone 13 Pro Max with Anker 65W three-port super power, from 0 to Wally.
The experiment records the process, and the charging rate is recorded every 5 minutes. Although the ordinary high-power fast charging charger has a fast charging speed, the biggest problem is that it is easy to heat up. Once it gets hot, electrothermal conversion will reduce the efficiency, resulting in slow continuous charging speed, and GaN gallium nitride charger solves these problems. When Anker 65W three-port overcharged iPhone 13 Pro Max is charged, the ambient temperature rises to 33.2 after 24 10 minutes, 36.2 after 30 minutes, and the highest temperature in the whole charging process reaches 38.3 after 40 minutes. After that, the charging began to change to constant current, and the temperature also dropped.
Many friends usually start charging their mobile phones when the battery is the lowest. They are always worried that frequent charging will be bad for battery life. In fact, there is no need to deliberately charge at low power, especially when it is used below 20%. This will shorten the battery life. The suggestion is to charge at will, even if it is about 80%, you can charge it with a charger. My previous iPhone 1 1 Pro Max, 1 has a battery health of 93% after two months, and my current iPhone12promox1year has a battery health of 95%.
Anker 65W three-port overcharge exclusive Power IQ technology, intelligent identification of equipment, automatic distribution of current, overload automatic power off, do not worry about overcharging damage to equipment.
Switch game machine supports PD fast charging protocol. The instant reading efficiency of Switch handheld mode is14.86V/1.05a/15.63W. With the voltage range of 15V/3.0A, the charging protocol of PD2.0 is successfully recognized, and the TV base mode of Switch is supported.
Switching TV dock mode requires more chargers, and needs to support 15V/3.0A protocol. Many PD chargers can't use TV dock mode without supporting this protocol, and can only charge Switch handheld mode. Anker's 65W three-port super charging can trigger the Switch TV base mode perfectly. The instant reading efficiency of the basic mode of switch TV is15.10v/0.43a/6.64w, and the voltage range is 15V/3.0A, which successfully identifies the charging protocol of PD2.0.
One plus 10 Pro mobile phone is special, which can support private flash charging up to 80W and is compatible with PD fast charging protocol. The instant reading efficiency of charging is 8.79V/1.90a/16.77W. Using the voltage range of 9V/3.0A, the charging protocol of PD2.0 is successfully identified.
When charging AirPods Pro, the instant reading efficiency is 5.00 V/0.31a/1.58W, and the charging protocol of Apple2.4A is successfully recognized. It can be seen that this charger is very friendly for charging small current devices, and it supports the protocol to automatically identify the charging protocol. It is no problem to charge Bluetooth headphones or smart watches at ordinary times.
USB-A is used for single port. IPhone 6s Plus supports Apple's 5V/2.4A charging protocol, and the instant reading efficiency is 4.97V/ 1.68A/8.40W, which successfully identifies Apple's 2.4A charging protocol.
Dual-port charging efficiency
USB-C dual ports are used at the same time, charging LG gram laptop and iPhone 13 Pro Max at the same time. USB-C 1 interface is used to charge LG gram laptop. The instant reading efficiency is19.70v/2.14a/42.25w. The voltage level is 20V/2.25A, and the PD charging protocol is successfully identified. USB-C2 interface charges iPhone 13 Pro Max, and the instant reading efficiency is 8.76/2.16a/19.0W. Using 9V/2.22A voltage file, PD charging protocol is successfully identified. Used at the same time with the official USB-C 1+C2. The data is the same: USB-C 1 provides a maximum of 45W, and USB-C2 provides 20W.
Three-port charging efficiency
Three ports are used at the same time, charging LG gram laptop, iPhone 13 Pro Max and iPhone 6s Plus at the same time. The USB-C 1 interface charges the LG gram notebook computer, and the instant reading efficiency is19.73v/1.91a/37.84w. The PD charging protocol is successfully identified by using a voltage range of 20V/2.00A. The instant reading efficiency of USB-C2 interface is 4.84 V/1.46a/7.12w when iPhone 13 Pro Max is charged; The data used at the same time with the official three ports are the same: USB-C 1 max 40W, USB-C2 max 12W, USB-A max 12W.
The more electronic devices we use with us, the higher the demand for fast charging technology, so it is really important for us to have a portable fast charging. Fast charging can be used to the fragmented fast charging method of charging and leaving. A small amount of repeated charging habits can also keep the battery of mobile phone equipment sufficient and solve the "power anxiety". When you are used to using a fast charger to charge your mobile phone and other devices in a short time, you don't have to wait for it to be fully charged or use it to charge the battery. At this time, the importance of a close-fitting standing fast charging is very obvious. The compact fast charging will not occupy the patch panel and affect the insertion of other jacks.
It is inevitable to charge notebook tablet and mobile phone. In order to solve the problem of rapid charging of equipment, it is necessary to start with a high-power charger, so these aspects should be considered when choosing: high power, small size and light weight, high compatibility, support for multiple charging protocols, support for multi-port simultaneous charging, low calorific value and high charging efficiency.
Anker Anke 65W three-port super charging, is it worth starting? For me, who likes to carry a charger lightly, there are many reasons to choose it:
On the whole, Anker 65W three-port super charger is cost-effective. It is not only compatible with iPhone 13/ Apple MacBook, but also can support the peak value of about 27W. Whether it is Android or Switch, it is suitable for daily use or travel scenarios with multi-device charging needs. I hope this sharing can help my friends.