Maintain taboos:
1, don't pile up heavy objects on the surface of chicken wing wood products, and don't mix them with hard objects such as keys to avoid the distortion of chicken wing wood.
2, don't just wipe with a wet cloth or rinse the chicken wing wood products with water, and avoid smearing items with chemical reagents. So, in other words, don't use caustic chemicals such as alkaline water and alcohol to wipe the chicken wing wood, so as not to destroy or damage the fiber of the wood.
Maintenance method:
1. Wipe the surface with a bath towel. In fact, it is to clean the wax layer and dirty color on the surface and re-polish it for about 2-3 hours every day for two to three days.
2. Polishing with a soft cotton cloth for a week is also considered as polishing. At this time, there will be traces on the surface of the soft cloth. This is a normal phenomenon, and the color will fade after a week.
3. Leave it for a week, let the beads dry naturally, and at the same time, the surface will contact the air evenly, forming a fine and uniform oxide protective layer.
4. Start the hand board. At this time, the hands must have just been washed and dried. Please don't directly electroplate your sweaty hands. Pay attention to the board around the nozzle, which can last for about 30 minutes every day.
Refer to the above? Baidu encyclopedia-chicken wing wood