The design of kitchen water circuit is very important, so how to design kitchen water and electricity well, let's take a look.
How to design kitchen water and electricity 1, more kitchen appliances.
Many people are concerned about whether it is appropriate to use more than 4 square wires or 2.5 square wires for kitchen circuits. Kitchen appliances are very concentrated and add up to a lot of power consumption, such as rice cookers, microwave ovens, electric cabinets and range hoods. At present, many families still use ovens, induction cookers, disinfection cabinets, bread makers, juicers, coffee makers, egg cookers, yogurt machines, electric pressure cookers, garbage disposal machines ... It is not uncommon for the comprehensive power of electrical appliances to exceed 4000W W ... 2.5. The load of PVC pipes with single copper wire sleeves is generally 3,400 W, so if you use kitchens with more electrical appliances, you can consider using 4-sided copper wires. If the original line is 2.5 lines, high-power appliances can consider pulling 4 square lines. According to personal needs, it is most important to make a good design plan in the early stage.
2. There is not enough water
Many times there is only one drain in the kitchen, but some owners need to drain the vegetable basin, and consider putting the washing machine in the kitchen, adding water softener, pure water machine, garbage disposal and so on. Generally, it is necessary to extend the original sewer pipe to increase the sewer pipe in the kitchen (in some cases, it is necessary to borrow other space drains). When replacing the sewer pipe, it is necessary to ensure the reliability of the joint (especially the reconstruction of the cast iron sewer pipe in the old house) and the smoothness of the running water, so as to prevent the backwater from overflowing due to excessive or poor water flow.
3. Pipeline mode
It is suggested that the water pipe should be capped to facilitate later maintenance; Because the kitchen is a humid area, the electric pipe should also go up as far as possible to avoid the influence of accumulated water in the middle of the pipe. If the objective conditions do not allow the electric pipe to go up and down, try to leave the pipeline in the middle of the whole pipe on the ground without joints.
4. Hot water supply
The hot water supply in the kitchen is nothing more than using gas water heaters or electric cupboards. The kitchen and bathroom are very close back to back, and most of them use gas water heaters to supply hot water, which is convenient for heating immediately, and the distance is far away to reduce the waste of water. Generally, there are many electric water heaters in kitchens and bathrooms. Of course, if you must choose a gas water heater when the kitchen and bathroom are far away, you can also consider making a whole house hot water circulation system.
5. Drawings are very important
The design of kitchen waterway is very important. Before the hydropower transformation, the cabinet designer and the hydropower transformation designer must make positioning design according to their own needs, and issue detailed drawings before the transformation. After the completion of water and electricity, improve the drawings, and at the same time, it is best to take pictures of the kitchen wall, roof and ground lines with a camera or mobile phone, which is convenient for punching holes and installing cabinets and electrical appliances in the later period.
;