After nucleic acid detection and sampling, the inspection department will carry out corresponding nucleic acid detection, which will be completed through five steps: sampling, sample retention, preservation, nucleic acid extraction and computer detection, and then upload the corresponding results to the health code.
But so far, the health code only shows the results of nucleic acid testing within 7 days, and it can't be queried after 7 days, because there are a large number of people doing nucleic acid testing everywhere, almost all of them have to do nucleic acid testing, and each nucleic acid testing point needs a certain amount of time to upload information. If the result is slow, it may be due to poor network conditions or application failure. It is recommended to wait patiently for the results of nucleic acid test.
Why didn't the nucleic acid test show up? The following reasons may cause the nucleic acid test results to be unable to be displayed:
1, with a large number of samples. If the number of samples to be tested by nucleic acid testing institutions is large, but the number of staff is small, it will lead to a delay in the time to produce results, and it will take some time for relevant information to be uploaded to the health code. It is suggested that there are no special circumstances and you can wait for a while.
2. There are errors in the information. The nucleic acid test results correspond to my identity information. However, if there is an error in personal information when uploading the nucleic acid test results, the nucleic acid test results may not be displayed on the health code. At this time, you can contact the nucleic acid testing agency for consultation. If there is any information error, proofread it in time.
Will the nucleic acid test results always be displayed on the health code? number
The results of nucleic acid detection are also valid. So far, the validity of nucleic acid test results is one week, which means that it will be displayed on the health code for one week. If the nucleic acid test results have been more than a week, it is impossible to prove whether COVID-19 is infected, and it is necessary to re-sample and re-test; But if the result is positive, I will be informed soon, so I don't have to worry too much about the slow detection of nucleic acid.
How long does it take for nucleic acid detection to produce results? 1~2 days.
How long it takes for nucleic acid detection to produce results depends on the number of samples or the detection ability of the region. Under normal circumstances, 1~2 days can produce results; There are also some institutions that can find the results in four to six hours.
Because different institutions have different instruments, testing methods and sample numbers, the time to produce results will be different. If the number of samples used for nucleic acid detection is large, the time to produce results may be delayed. It is suggested to wait patiently for the results for nucleic acid detection after sampling.