First, the reason for cleaning the tap water pipeline
1. For the water supply pipeline that has been used for a long time, the oxidation reaction will produce rust due to the movement of water in the pipeline. When the pipeline is installed or damaged, the sediment entering the pipeline will accumulate in the pipeline, resulting in smaller internal diameter of the pipeline, insufficient water flow and poor water supply. In severe cases, it will block the pipeline and cannot supply water.
2. In addition, due to the degradation of water quality and the pollution of secondary water supply, various microorganisms in the water proliferate in large numbers, which leads to the increase of harmful substances such as bacteria and viruses in the water, posing a serious threat to people's health. Therefore, cleaning the old water supply network is an effective way to deal with pipeline blockage and poor water supply caused by excessive deposits such as rust and sediment, and it is also a necessary measure to purify water quality and ensure the safety of drinking water.
Because water pipes are closely related to people's lives and days, it is necessary to choose physical methods for cleaning. Air pressure pulse cleaning technology uses air and water as the medium, and relies on the physical wave composed of high-speed jet and controllable pulse to impact and stir the pipe wall, peel off rust and deposits layer by layer, and quickly remove the outside of the pipe to achieve the purpose of cleaning. It has no corrosion to pipelines, no pollution in discharge, and can effectively purify water quality.
Second, the tap water pipeline cleaning
1, pump dredging method
When the water pipe is blocked, you can insert the hose of the water pump into the drainage pipe, close the drain, and then put enough clean water to quickly pump air into the sewer to clear the pipe.
2. Soda plus vinegar dredging method
Use high-concentration vinegar and cooked baking soda powder, first pour the appropriate cooked baking soda powder into the sewer, and then pour the appropriate high-concentration vinegar. Soda powder reacts violently with vinegar, which can remove grease and other sticky things in the pipeline.
3. Log dredging method
Pierce a log with a diameter close to the drain into the drain with a log with a diameter close to the drain, put enough water in the pool, and then quickly twitch the log up and down. Under the action of pressure and suction, the dirt in the pipeline may be washed away.
4, tap water pipeline cleaning machine
Using the cleaning equipment of Laijiabang tap water pipeline developed by Dr. Taiwan Province Institute of Technology, with professional cleaning skills, water and gas are injected into the pipeline in stages, and physical air pressure pulses with different frequencies and wavelengths are emitted. Under the action of high-pressure gas, the medium water generates pulse water waves, which scour the inner wall of the pipeline, so that rust and bacteria in the pipeline are separated from the pipe wall, and then discharged from the system through the sewage discharge end. Ensure that all pollutants on the inner wall of the pipeline can be cleaned without any chemical supplies, which not only prolongs the service life of the pipeline, but also ensures our health and safety problems.
The above is the reason and method that Bian Xiao introduced to you to clean the tap water pipeline. After reading Bian Xiao's introduction, do you know more about the cleaning of water pipes? I hope Bian Xiao's introduction can help you.