How to set up Huawei wifi6+ router?

Huawei router AX3 Pro is a WiFi6-way device, which uses Lingxiao chip and WiFi6 intelligent frequency division. Multiple devices are not connected, and 128 devices are supported at most. It is chip-level collaboration, through the wall, and also supports one-click networking. So, how do you set up a network for this router? There are two ways. Huawei routers are universal and learn to make money.

Set up Internet access through mobile phone and computer browser.

First, turn on the power of the router, and then connect the WAN port to the broadband incoming line (optical cat, home network cable, etc.). ). Routing AX3 Pro does not distinguish between WLAN/LAN ports, and supports blind insertion and adaptive network.

Then connect the router with your mobile phone and computer. The name of the router WiFi is generally at the bottom of the router. The computer can connect to the router through the network cable, and any network port can be used. This is an important step. Connect before setting. Same as table operation, first select, then operate.

When a mobile phone or computer is connected to the router's network, it will automatically jump to the settings page. If there is no automatic jump, open the router and enter the default management page address:192.168.3.1.

After agreeing to the terms, you can start the configuration. The router will automatically detect how many online ways you have for you to choose. You can choose one mode, including broadband dial-up Internet access, automatic IP access and wireless relay mode. Broadband dial-up Internet access only needs to enter your own broadband account number and password, and automatic access is simpler without setting. The wireless relay only needs to search the scanning signal, enter the wireless network password, and then it will be automatically set as the same account password.

Huawei router has a very convenient function. If you forget the broadband account password, you can get it from the old router. Simply plug the network cable into the WAN port of the old router, you can connect to any network port of Huawei router and directly obtain the broadband account password. It's very clever. There are also tips on how to operate in the process.

After configuring the Internet access mode, set the wireless name and password. The router will change from red light to green, white and blue, indicating that it is normal, and the mobile phone can access the Internet when it is reconnected to the wireless.

Connect to the internet through smart life

You can also use smart life settings, and the phone is connected to the router first. If the location service is turned on, a new router will appear in the list to remind you whether to connect.

Click Configure Scan Now and add a router at the bottom of the router. You can also directly connect to the router's WiFi configuration.

The next configuration is basically the same as the mobile browser. Because privacy is involved, screenshots are not allowed, so the setup step diagram is not provided here. If Huawei AX3pro router forgets to reset the wireless password and administrator password, just press the reset button on the right side of the figure with the length of the card pin and wait for the indicator light to flash.

The router also supports one-click networking. NFC-enabled mobile phones can directly connect to the network by touching the NFC icon at the bottom of the right side of the router without entering a password. ?