You must have encountered this situation, the faucet always has a gap in the leakage, it feels like the water can not be turned off. So what exactly is the reason why the faucet is always leaking? Is there a way to deal with it?
The following craftsman small flower will teach you to deal with some common leaky faucets, as long as you master the following methods, you can easily solve the problem of leaky faucets.
Leakage caused by the seal of the faucet
Dripping occurs when the faucet is closed, while leakage occurs when water flows through the faucet. If you see water gushing out from around the handle, then your faucet is leaking.
The first thing to do is to make sure the caulking nut on the faucet is tight, but be careful not to scratch or damage the nut with pliers or a wrench.
Here are the tools you'll need to replace the faucet seal: wrench, new faucet seal, and petroleum jelly.
Step 1: Turn off the water supply and remove the faucet handle.
Step 2: Unscrew the caulking nut and remove both the nut and the old seal from the spool.
Step 3: Install the new seal. Wrap it around the spool a few times if you're using a wire seal, or just once if you're using a soft wire type seal.
Before you put the faucet back together, apply a thin coat of petroleum jelly to the threads of the spool and to the threads of the caulking nut.
Leaks caused by faucet seats
If your faucet is still dripping after you've replaced the washer, there may be a problem with the faucet seat. A damaged washer can cause the faucet seat to become uneven as the metal spool wears away, or chemical deposits in the water can form a residue that prevents the washer from being fully compressed against the seat.
In this case, you can replace the entire faucet. Another option is to replace just the faucet seat. Removing the old seat is a simple matter if you have the right tool (a valve seat loosening wrench). Insert the valve seat loosening wrench into the seat and wrench it in a counterclockwise direction.
Once you've removed the old seat, make sure the new seat you buy is identical to the original. If the seat can't be removed, insert a seat bushing that slides into place on the old seat and provides a seal.
Another option is to use a seat lapper or sander, an inexpensive tool that can resurface worn seats. Be careful not to take too long or use too much force when using this tool, as the valve seat is made of soft metal and you can easily wear it off too much.
To use the grinder, first remove the faucet cartridge and insert the seat grinder down into the seat in the faucet body. Rotate the tool clockwise a few times with moderate force, then use a cloth to apply any metal shavings that fall from the valve seat.
Frequently Asked Faucet Questions
Why is it still leaking even after I replace the entire faucet?
Some leaks have nothing to do with the faucet itself, but may be caused by improper installation of the water hose and the faucet body. In addition, it may also be due to the water supply to the faucet water hose aging, unstable water pressure or corrosion and other problems. The consequences of cracking and bursting of the water supply hose can also be serious. Therefore, True Artisan recommends checking or replacing the upper water hose every 1-2 years or so.
What should I pay attention to when repairing my faucet?
If you are repairing it yourself, the first thing you should do is turn off the water supply. Simply turn off the water supply by turning off one of the water supply valves near the faucet, but if the house is not equipped with water supply valves for each faucet, you will need to turn off the main water supply valve.
How should I normally use my faucet properly?
Some people like to tighten the faucet every time after using the water, thinking that this can prevent water leakage. In fact, the correct use of the faucet should be as light as possible, do not vigorously rotate the faucet repeatedly, in addition, the faucet should try not to bump with hard objects.
WeChat public number: real craftsman