There are two major types of activated carbon cartridge products: compressed activated carbon cartridge and bulk activated carbon cartridge.
1, compressed activated carbon cartridge using high adsorption value of coal activated carbon and coconut shell activated carbon as a filter material, and food-grade binder sintering compression molding. The inside and outside of the compressed activated carbon cartridge are wrapped with a layer of non-woven fabric with filtration effect, which ensures that the carbon core itself will not fall off the carbon powder, and the two ends of the carbon core are equipped with soft nitrile rubber sealing gasket, which makes the carbon core loaded into the filter cartridge with good sealing.
2, bulk type activated carbon cartridge will need activated carbon particles into the special plastic shell, with welding equipment will be welded to the shell end caps on both sides, the shell ends were put into the filtering role of the non-woven cloth filter, to ensure that the carbon core will not fall off the charcoal powder and black water when in use. According to the customer's needs, the shell end caps can be made into different types of connections. The connection methods are: flat pressure type, pipe type (models: 4042, 4044, 4046, etc.). Upper section: polypropylene meltblown cartridge precision 5μm
Next section: granular activated carbon cartridge built-in activated carbon 170g
Materials: ABS, PP
Length: 250mm O.D.: 70mm Flux: 8L/S Total flux: 6-8T
Activated carbon indicators: strength > 90; iodine value (mg/g)>. 950; Methylene blue value (mg/g)>120 Stainless steel filter (Stainless Steel filter )[1], has a very good filtration performance, the filtration particle size of 2-200μm can play a uniform surface filtration performance, the main filter material is a multi-layer stainless steel sintered wire mesh, the filtration accuracy of 0.5-200μm, the dimensions of its shape can be processed according to user requirements. Its external dimensions can be processed according to the user's requirements.
Stainless steel cartridge features:
1 good filtration performance, the filtration particle size of 2-200μm can play a uniform surface filtration performance;
2 corrosion resistance, heat resistance, pressure resistance, wear resistance;
3 stainless steel cartridge pore uniformity, accurate filtration accuracy;
4 stainless steel cartridge flow rate per unit area is large;
4 stainless steel cartridge unit area is large.
5 Stainless steel cartridge is suitable for low and high temperature environment; it can be reused after cleaning and free from replacement.
Applications: petrochemical, oilfield pipeline filtration; refueling equipment, engineering machinery and equipment fuel filtration; equipment filtration in the water treatment industry; pharmaceutical and food processing fields; Rated flow 80-200l/min Working pressure 1.5-2.5pa Filtration area (m2) 0.01-0.20 Filtration precision (μm) 2-200 μm Filter material stainless steel woven mesh Stainless Steel Perforated mesh is used for heavy oil combustion system pre-stage de-watering, can also be used for chemical liquid filtration, precision 100um, filter element material is stainless steel round microporous mesh.
Suitable for electronics, petroleum, chemical, pharmaceutical, food and other industrial sectors in the pretreatment and post-treatment system. Further purification of water with low suspended impurities (less than 2~5mg/L). Filter material: the main filter material used is stainless steel woven mesh, stainless steel fiber sintered felt. Characteristics: Favorable for ultra-low temperature, high temperature and high pressure;
Good porosity;
Low pressure loss;
Higher machinability;
Air purification, water treatment sterilization filtration;
High-temperature, high-viscosity fluids;
Showing the lowest pressure difference;
Anti-cleaning and can be reused after cleaning.
Backwash and reuse after cleaning.
Applications: Fiber, film, plastic polymer, pharmaceutical, food industry, paint industry, excellent corrosion resistance, durability, heat resistance,
high temperature exhaust treatment field. Product characteristics:
Hua membrane membrane stack consists of polypropylene microfiber membrane and polypropylene non-woven fabric support infusion layer, is a deep filter core folded structure, membrane filtration area is large, large flux. It has large membrane filtration area, high flux, low differential pressure, strong dirt-holding capacity and long service life. A variety of filtration precision can be selected, wide range of applications. Good chemical compatibility, suitable for filtering strong acid, strong alkali and organic solvents. Processed and molded by hot-melt welding technology, without any chemical adhesive, no leakage, no secondary pollution.
Applications
1, reverse osmosis RO system pretreatment
2, acid, alkali and chemical organic solvents filtration
3, semiconductor, electronics industry, high-purity water pre-treatment
4, mineral water, wine, juice filtration
5, oilfield refill water filtration
Materials structure
1 Membrane material: polypropylene (PP)
2. Inflow support layer: polypropylene (PP)
3. Shell/center rod/end cap material: polypropylene (PP)
Operating conditions
1. Maximum differential pressure
(1) Positive -75PSI (5.1Bar) @ 20℃< /p>
(2) Forward -25 PSI (1.7Bar)@80℃
(3) Reverse -30 PSI (2.0Bar)@25℃
2, 滤芯更换推荐压差@1.5 Bar-2.0Bar
3, the maximum operating temperature: 80 ℃
4, sterilization disinfection: 121 ℃ online steam sterilization, 20 minutes each time, available 5 times, 85 ℃ - 95 ℃ hot water disinfection
Specification size
1, the filter area: 0.5 ㎡ / 10 ″
2, the outer diameter: 69mm
3, Nominal length: 5″, 10″, 20″, 30″, 40″
4, Nominal precision (unit: um): 0.1, 0.2, 0.45, 0.65, 1, 3, 5 ............ ...
Model/Ordering Information Model Filtration Accuracy End Cap Seal Material Nominal Size PPL-PP Microporous Membrane 010:0.1um
020:0.2um
045:0.45um
100:1um
300:3um
............
H10:10um CODE-0 Flat Pressure Double Opening
CODE-7 226/Fin Tail
CODE-8 222/Fin Tail E-Ethylene propylene terephthalate (EPDM)
N-J Nitrile Rubber
S-Silicone Rubber
V-Viton 5:5″
10:10″
20:20″
30:30″
40:40″ Connection Type
1,215,220,222,226,Threaded M30,Threaded M36,etc.
2, fin type, flat type, triangular fin type, flat type Performance characteristics
First, made of polypropylene as raw material, continuous polypropylene long fibers produced by meltblown process and wound
Second, high filtration accuracy, high flow rate, uniform structure, large dirt-holding capacity, and long service life
Third, good chemical compatibility, no additives, the fibers will not fall off easily. Fiber is not easy to fall off
Fourth, widely used, cheap
Application
HCMS meltblown cartridge can be used for pre-filtration and security filtration of all kinds of pure water systems, filtration of food, beverage, drinking water, solvents, acid, alkali filtration, boiler water filtration, oil filtration
.