The main ones that make aerial work trucks are JIANGZULING, ISUZU, DONGFENG, FOTON, JAC and so on, their quality and after-sales service are good.
Aerial work trucks are mainly divided into two kinds of straight-armed and curved-armed, and the price of straight-armed aerial work trucks is a bit higher than that of curved-armed aerial work trucks. Their conventional models are as follows:
A, straight-arm aerial work truck
1, 17.5 meters straight-arm aerial work truck reference price: 28.9-358,000
Configuration description: Qingling Isuzu 100p chassis, cab axle car interior, Isuzu 100 hp engine, 5-speed transmission, wheelbase of 3360mm, 3.5 tons of rear axle, 7.5 tons of rear axle, 3.5 tons of rear axle, 3.5 tons of rear axle, 3.5 tons of rear axle, 3.5 tons of rear axle, 3.5 tons of rear axle, 3.5 tons of rear axle. 3.5 tons rear axle, 7.00 original steel wire tires, original abs, with directional assistance, clutch booster, oil brake, original air conditioning. Three-section pentagonal telescopic boom, unrestricted, maximum operating range 13.5m; maximum operating height: 17.5m; operating range at maximum operating height 4.4m, 360°full rotation. Front V and rear H-type outriggers, transverse span of outriggers(mm) 4000; longitudinal span(mm) 4000; rated load of crane ≤200㎏. Aluminum alloy basket size: 1400X700X1150, hydrostatic leveling with cylinder locking function, manual and remote control operation. With emergency power unit.
2, 21 meters straight arm aerial work truck reference price: 36.9-438,000
Configuration description: jiangsu suzu shunda chassis, single-row cab can be front-loaded, jiangsu 115 hp engine, 5-speed gearbox, wheelbase 3360mm, 2 tons front axle, 3.5 tons rear axle, 7.00R16 steel wire tires, original abs, with directional assistance, clutch booster. Oil brake. Four-section pentagonal telescopic boom, maximum operating range 13m; maximum operating height: 21m; operating range at maximum operating height 4.4m, 360°full rotation. Front V rear H-type outrigger, transverse span of outrigger (mm) 4000; longitudinal span (mm) 4000; rated load of crane ≤200㎏. Aluminum alloy basket size: 1400X700X1150, hydrostatic leveling with cylinder locking function, manual and remote control operation. With emergency power unit.
3, 26 meters straight arm aerial work truck reference price: 45.6-518,000
Configuration description: jiangsu suzu shunda chassis, single cab can be turned forward, jiangsu 115 hp engine, 5-speed transmission, wheelbase 3360mm, 2 tons of front axle, 3.5 tons of rear axle, 7.00R16 steel wire tires, the original abs, with directional assistance, clutch booster. Oil brake. Four-section pentagonal telescopic boom, maximum operating range 14.6m; maximum operating height: 26m; operating range 5m at maximum operating height, 360°full rotation. Front V rear H-type outrigger, transverse span of outrigger (mm) 4900; longitudinal span (mm) 5190; rated load of crane ≤200㎏. Basket size: 1500X700X1150, hydrostatic leveling, with cylinder locking function, manual and remote control operation, with emergency power unit.
Second, curved-arm aerial work truck
Reference price of 12-16 meters aerial truck: 188,000-236,000
Configuration description: jiangling chassis, jiangling 115 hp engine, 5-speed gearbox, 7.00R16 steel wire tires, oil brakes, original air conditioning. The arm and outrigger are made of 4-5㎜ low alloy Q345 profiles, upper and lower arm cross section 230×230×4 and 200×200×4, outrigger box cross section 230×160×5 and 215×145×5; H-type outrigger has good stability, the outrigger can operate the rotary table at the same time or individually for two-way 360°continuous rotary, and it adopts turbine-worm gear reduction mechanism (with self-lubrication and self-locking function), and the post Maintenance can also be easily achieved by adjusting the bolt position. Disembarkation and boarding are interlocked; the working platform adopts tie rod mechanical leveling; the rotary table and cradle are equipped with start and shut-off switches, which is convenient for operation and saves fuel; the operation orientation is all updated to the right side of the vehicle, which ensures the safety of the operators.
2, 18 meters crank arm type truck reference price: 20.9-25.8 thousand
Configuration description: using Jiangling chassis, single-row front flip, bridge car interior, Jiangling 152 horsepower engine, 6 gear transmission, wheelbase 3815mm, 5.2 tons of rear axle, 7.50R16 original steel wire tires, the original abs, with power steering, the original air conditioning, clutch power, air break brakes, electric glass, the original abs, with power steering, original air conditioning, clutch power, the original air-conditioning. air brake, electric glass, center lock. Three-section folding arm, max working radius: 7.5m, max working height: 18m, 360°swing. Max.lifting mass:1000kg,max.lifting height:8.3m.outrigger span:single cab longitudinal X transversal(mm):4840X3780,double cab longitudinal X transversal(mm):4020X3780.rated load:≤200kg. Basket size: 1080X610X1100, external tie rod mechanical leveling with cylinder locking function, double position operation of turntable and basket, all four legs extend horizontally and can be adjusted individually.