I, 5083 aluminum plate introduction
II, 5083 aluminum plate application range
III, 5083 aluminum plate chemical composition
IV, 5083 aluminum plate mechanical properties
V, the relevant technical standards
VI, 5083 aluminum plate representation
Edit paragraph a, 5083 aluminum plate introduction
5083 belongs to the Al-Mg-Si alloy, the use of a wide range, especially the construction industry can not do without this alloy, is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and has a medium strength. 5083's main alloying element is magnesium, with good forming and processing performance, corrosion resistance, weldability, medium strength, used in the manufacture of aircraft fuel tanks, fuel lines, and transportation vehicles, ships, sheet metal parts, instrumentation, street lamps brackets and rivets, hardware, electrical shells. AL-Mn system alloy, is one of the most widely used rust-proof aluminum, this alloy has high strength, especially with fatigue strength: high plasticity and corrosion resistance, can not be heat treatment to strengthen,, in the semi-cold hardening plasticity is still good, cold hardening of plasticity is low, good corrosion resistance, good weldability, cutting performance is poor, can be polished. Uses are mainly used for the requirements of high plasticity and good weldability, working in liquid or gaseous media in low load parts, such as mailboxes, gasoline or lubricating oil conduits, a variety of liquid containers and other small load parts made with deep drawing: wire is used to make rivets [1]
Edit this paragraph II, 5083 aluminum plate applications
5083 aluminum plate is commonly used in ships, naval vessels, Vehicle materials, automobile and aircraft plate weldments, pressure vessels requiring strict fire protection, cooling devices, TV towers, drilling equipment, transportation equipment, missile components, armor, etc..
Edit paragraph three, 5083 aluminum plate chemical composition
Aluminum Al: remainder Silicon Si: 0.4 Copper Cu: 0.1 Magnesium Mg: 4.0--4.9 Zinc Zn: 0.25 Manganese Mn: 0.40--0.10 Shanghai kingland Xin Aluminum to provide pictures
Titanium Ti: 0.15 Chromium Cr: 0.05--0.25 Iron Fe: 0.4 Single: 0.05 Total: 0.15[2]
Edit paragraph four, 5083 aluminum plate mechanical properties
Tensile strength σb (MPa): 110-136 Elongation δ10 (%): ≥20 Annealing temperature is: 415 ℃. Yield strength σs (MPa) ≥110 Specimen blank size All wall thickness Shanghai kingland Xin Aluminum provide pictures
Elongation δ5 (%) ≥12
Edit paragraph V. Relevant technical standards
[3] Aluminum sheet and strip national standards (GB/T 3880-2006), applicable to aluminum alloy sheet and strip materials of the unified standard.
Edit this paragraph six, 5083 aluminum plate representation
1) the grade of processed products The Aluminum Association of the United States (AA) on the deformation of aluminum and aluminum alloy grade representation, both the four-digit numerical designation representation, as early as 1957 was admitted to the American National Standard (ANSIH35.1), the United States of America's major aluminum producers have gradually adopted this grade representation. Later, the U.S. military standards (MIL), the American Society of Automotive Engineers (SAE), the American Society for Testing and Materials (ASTM) and so on have been adopted one after another, but also in the promotion of other countries. 1970 and AA standard based on this set of four-digit code, resulting in the deformation of aluminum and aluminum alloys of the international four-digit numbering system, referred to as IDS. As a result, the deformed aluminum and aluminum alloy part of the AA standard has also become an international standard. ZN alloys; 8XXX Aluminum and other alloys; 2) The second digit of the four-digit designation, which indicates the modification or control of impurities and combinations of elements, and 3) The last two digits of the four-digit designation (both the third and fourth digits), which have the following meanings: For Group 1XXX, the last two digits indicate the two digits after the decimal point of the lowest percentage (99.00%) of pure aluminum. For group 1XXX, the last two digits represent the two digits after the decimal point of the lowest percentage of pure aluminum (99.00%). For group 2XXX-8XXX, the best two digits have no specific meaning and are used only as sequential numbers to identify different aluminum composites in the same group.