1) Instruction manual (Chinese), technical manual (Chinese) and maintenance manual (Chinese).
2) Product assembly diagrams, working principle diagrams, wiring diagrams, parts configuration diagrams, insulation diagrams and picture tubes (if any) of the technical data, which net power supply part and the application of the part to have a detailed drawing and insulation diagrams.
3) power transformer structure, electrical diagrams, electrical parameters (primary, secondary rated voltage, rated current, protection current value or thermal circuit breaker type / specification, dielectric strength, etc.), shape drawing.
4) Printed board drawings (1:1) of the net power section and application section.
5)List of components of the net power supply part and application part (including manufacturer, parameters, certification certificate), of which safety-critical parts are required to fill in "Schedule 1".
6) transformer, motor winding insulation material grade (A-H), the thickness of the insulation material.
Two, accessories
1) transformers need to provide only the number of secondary windings for the number of groups plus 1 (dipped in paint), in addition to the provision of unpainted transformer 2 (which contains 1 unpacked semi-finished products), greater than 5kw of the motor needs to be pre-buried in the windings of the temperature probe.
2) The main parts to be provided for the net power supply part and the application part are: 2 circuit boards for the net power supply part and the application part, 1 blank printed board, 1 each of capacitors, inductive filters, fans, switches, wiring devices, motors, heaters and so on.
3) Fuses and fuse holders for equipment (including thermal fuses and overcurrent releases) 3 per model.
4) Injection molding shell of the material sample block, material name, transformer support pieces each 1 (specific size depending on the prototype).
5) Cord 0.5m from the power outlet to the fuse holder.
6) Power supply assembly (modular power supply for the device)
7) 1 foot switch (if applicable)
8) power supply soft cord 1 (including plug)
9) cleaning, disinfection and sterilization of special substances
three, other instructions
1) the above safety critical parts if the use of the certificate has been awarded the 3C safety certification, and the certification standards and the same as the provisions of GB9706.1, you can provide Relevant copies of the certificate (fill in the commitment), can not send accessories after the audit confirmation.
2)If a safety critical parts of the previous product has been tested and meet the standard requirements, you can provide the relevant information, can not be sent after the audit to confirm the accessories.
3)Other special circumstances according to the sample to be determined.
4)Fill in the "Schedule 1" and "Letter of Commitment" and submit the materials together.
5)Incomplete samples, incomplete accessories, incomplete information, please prepare and send samples