The PVC market situation in rubber products industry is stable. Except that the military products are designated by our own manufacturers, no product is monopolized. It can be said that any product has a certain market, and the demand for many products is gradually expanding with the development of the national economy. Therefore, the insiders pointed out that china rubber's products industry will have a bright future in the next few years.
China's rubber products involve a wide range of fields, and there is a great demand for products, but no product has not survived the competition of many enterprises. The most prominent contradiction between supply and demand is rubber products for automobiles.
At present, the country and some cities regard the development of automobile industry as a pillar industry. The development of automobile industry can drive the start and development of many related industries. The development trend in recent years proves that the market potential of rubber products for automobiles is huge. Attracted by the huge market demand, many enterprises have poured into the automobile main engine and parts market, resulting in the gradual improvement of product performance, but the price has been falling all the way. There are nearly 100 oil seal manufacturers in China, and the main producers are Zhong Ding Co., Ltd., Wuxi meifeng Rubber Products Manufacturing Company, Haimen Rubber Factory No.1, Nanjing 7425 Factory, Tieling Brilliance Rubber Products Company, Zhangjiakou Century Rubber Company and Guangzhou Orlis Oil Seal Co., Ltd.
With the improvement of farmland water conservancy construction and water conservancy infrastructure, there is a certain demand for sealing products (produced by Nanjing Rubber Factory), rubber dams (produced by Shenyang No.4 Rubber Factory, Yangzhou Rubber General Factory, Beijing No.10 Rubber Factory and Guangzhou No.6 Rubber Factory) and rubber solutions. In 2000, the national output of rubber dams alone reached 8-65,438+10,000 square meters.
Iron and steel enterprises pay more and more attention to environmental protection and gas storage and recovery, so the amount of gasholder diaphragm is increased. In the bidding of this product project in 2000, the achievements of Shenyang No.4 Rubber Factory, the first diaphragm factory of gas storage tank, over the years also faced the challenges of product price competition and market share of enterprises later.
The increase in the consumption of medical rubber products brings hope to manufacturers, but also brings more severe price wars. The main producers of natural rubber stoppers in China are Shijiazhuang No.1 Rubber Co., Ltd., Ningbo Xingya Rubber & Plastic Group Co., Ltd., Bayan Rubber Co., Ltd. and Shanghai Xinya Medical Rubber Co., Ltd. ... The release of the national directive to replace natural rubber stoppers with butyl rubber stoppers, the wide application of medical air cushion beds, and the upgrading of portable oxygen bags (the output of Shanghai Sanhe Medical Equipment Co., Ltd. and Shanghai Rubber Products No.4 Factory increased in 2000) have inspired many enterprises, that is, enterprises can only develop new products to have vitality and a way out.
In recent years, the use of various cots has brought business opportunities to many enterprises. They established a professional cots production line, introduced equipment and set up a professional company, which greatly increased the output of cots in 2000. For example, Nanjing Rubber Factory, Guangzhou Sixth Rubber Factory and Wuhan Hongqiao Rubber Factory are all major producers of cots in China. Tianjin No.1 Rubber Products Factory will also become a new force after introducing foreign equipment.
With the acceleration of highway construction, the demand for engineering rubber is also increasing. After the speed increase of railway, the performance requirements of rubber products for railway are improved and the consumption is increased, which provides a certain market demand for rubber pads for pillows, rubber bridge bearings, rubber spring elements, shock-proof rubber and so on.
The seismic design of buildings has added a new topic to the development of rubber products in the future-the production of damping rubber blocks and products.
In addition, the application of new waterproof materials, the variety of rubber anti-corrosion lining and its application in power plants and other industries have opened up a broad market for the development of rubber products industry, and at the same time, rubber products are required to meet the diverse and diversified needs of the market.
-
The PVC market is stable. The seller's initial contract price was USD 840 ~ 850 (CFR, China, the main port of Hongkong/China) (ton price, the same below), which was strongly opposed by several big end users and showed little interest in buying. The weak market has reduced sales, which is expected to continue. The mainland market of China declined, and the price of PVC in major provinces fell. Although the operating rate of end users has recovered, the purchase volume of these enterprises has not increased as much as expected, resulting in limited sales of sellers and increased inventory. Downstream end users continue to operate at the previous level, and several end users hold an average of 1 ~ 2 months of inventory, and intend to order after reducing the inventory.
Trading in the polypropylene market has stagnated, as interest in Chinese mainland's major markets has declined and stocks are abundant. Most buyers expect the price of polypropylene to fall in the coming weeks. A few purchase intention prices are below 1 100 USD (CFR, China). The Southeast Asian market also reflects the fundamentals of the China market, and the interest in buying has disappeared. A supplier said that the intended purchase price of1120 ~1130 USD (CFR, Southeast Asia) is difficult to achieve, because the buyer thinks that the market price in China will continue to fall. The BOPP market is also relatively quiet, with the quotation1130 ~1140 USD (delivery price) and the intended purchase price 1 120 USD (CRR, Southeast Asia).
The demand situation of polystyrene market is depressed, and end users are still waiting to see. Most buyers said that their stocks were sufficient, so they delayed buying the goods and waited for the price to fall further. However, the supplier has no intention of lowering the quotation because there is no profit. The price of spot GPPS goods is about 1090 ~ 1 130 USD (CFR, Hongkong, China/South China, China), and that of HIPS goods is about1140 ~1170 USD. The sporadic sales price of GPPS and HIPS is about 1070 ~ 6570. In Southeast Asia, the transaction price of GPPS is reduced to1130 ~150 USD (delivery price), and the transaction price of HIPS is1/kloc-.
The spot price of ABS in Northeast Asia market increased by USD 30 to USD 65,438+0,400 ~ 65,438+420 (CFR) compared with the previous period, but the overall trading situation was deserted, because traders took a wait-and-see attitude and waited for the price trend to be clear. The market quotation is about 65,438+0,400 ~ 65,438+0,460 USD (CFR, China and Hongkong), but traders and end users are concerned about the price trend and are unwilling to make firm offer and quotation. The market price in Southeast Asia has not changed much, and the quotation is stable at 1430 ~ 1460 USD (CFR). Due to relatively few speculative transactions, the trading volume is limited. However, the quotations above $65,438+$0,450 (CFR, Southeast Asia) were almost ignored, because the price of styrene monomer in the upstream was weak, but some small quantities of goods were traded at this price. Trading in the Indian market was quiet, but prices remained stable. Demand for imported goods is weak due to the supply of low-priced goods in the Indian market. The quoted price of domestic goods in India is equivalent to 1300 ~ 1350 USD (CFR), including 10% import tax and other expenses.
The trading situation in the polyethylene market is still deserted, and the high quotation makes buyers hold a wait-and-see attitude. Due to the small volume, it is difficult to guide the whole market trend, so the price remains relatively stable. Turbulent crude oil and weak ethylene prices have brought considerable uncertainty to China buyers. Since LLDPE film-grade products have entered the peak season since mid-March, most market traders have high expectations, and LLDPE film-grade products have the fastest market recovery among all grades of polyethylene.
HC Plastics News: PVC market is stable. The seller's initial contract price was USD 840 ~ 850 (CFR, China, the main port of Hongkong/China) (ton price, the same below), which was strongly opposed by several big end users and showed little interest in buying. The weak market has reduced sales, which is expected to continue. The mainland market of China declined, and the price of PVC in major provinces fell. Although the operating rate of end users has recovered, the purchase volume of these enterprises has not increased as much as expected, resulting in limited sales of sellers and increased inventory. Downstream end users continue to operate at the previous level, and several end users hold an average of 1 ~ 2 months of inventory, and intend to order after reducing the inventory.
Trading in the polypropylene market has stagnated, as interest in Chinese mainland's major markets has declined and stocks are abundant. Most buyers expect the price of polypropylene to fall in the coming weeks. A few purchase intention prices are below 1 100 USD (CFR, China). The Southeast Asian market also reflects the fundamentals of the China market, and the interest in buying has disappeared. A supplier said that the intended purchase price of1120 ~1130 USD (CFR, Southeast Asia) is difficult to achieve, because the buyer thinks that the market price in China will continue to fall. The BOPP market is also relatively quiet, with the quotation1130 ~1140 USD (delivery price) and the intended purchase price 1 120 USD (CRR, Southeast Asia).
The demand situation of polystyrene market is depressed, and end users are still waiting to see. Most buyers said that their stocks were sufficient, so they delayed buying the goods and waited for the price to fall further. However, the supplier has no intention of lowering the quotation because there is no profit. The price of spot GPPS goods is about 1090 ~ 1 130 USD (CFR, Hongkong, China/South China, China), and that of HIPS goods is about1140 ~1170 USD. The sporadic sales price of GPPS and HIPS is about 1070 ~ 6570. In Southeast Asia, the transaction price of GPPS is reduced to1130 ~150 USD (delivery price), and the transaction price of HIPS is1/kloc-.
The spot price of ABS in Northeast Asia market increased by USD 30 to USD 65,438+0,400 ~ 65,438+420 (CFR) compared with the previous period, but the overall trading situation was deserted, because traders took a wait-and-see attitude and waited for the price trend to be clear. The market quotation is about 65,438+0,400 ~ 65,438+0,460 USD (CFR, China and Hongkong), but traders and end users are concerned about the price trend and are unwilling to make firm offer and quotation. The market price in Southeast Asia has not changed much, and the quotation is stable at 1430 ~ 1460 USD (CFR). Due to relatively few speculative transactions, the trading volume is limited. However, the quotations above $65,438+$0,450 (CFR, Southeast Asia) were almost ignored, because the price of styrene monomer in the upstream was weak, but some small quantities of goods were traded at this price. Trading in the Indian market was quiet, but prices remained stable. Demand for imported goods is weak due to the supply of low-priced goods in the Indian market. The quoted price of domestic goods in India is equivalent to 1300 ~ 1350 USD (CFR), including 10% import tax and other expenses.
The trading situation in the polyethylene market is still cold and cheerless, and the high quotation makes buyers take a wait-and-see attitude. Due to the small volume, it is difficult to guide the whole market trend, so the price remains relatively stable. Turbulent crude oil and weak ethylene prices have brought considerable uncertainty to China buyers. Since LLDPE film-grade products have entered the peak season since mid-March, most market traders have high expectations, and LLDPE film-grade products have the fastest market recovery among all grades of polyethylene.