How to adjust the fan belt of Nanjing Iveco engine

Press the middle part of the belt with your fingers (about 98N) to check whether the deflection of the fan belt is between 8 ~ 12mm, otherwise it should be adjusted; In addition, check the belt for cracks and damage, and replace and adjust it if necessary. If the belt tension is too small, it will lead to insufficient battery charging or overheating of the engine; Otherwise, the generator or V-belt will be damaged.

Adjust by the adjusting gasket inside. The fewer pieces, the tighter the replacement step: remove the front water tank and fan blades. Remove the generator belt and compressor belt. Remove the four 8-angle screws on the crankshaft pulley and the front pulley to remove the fan belt. During installation, the four screws on the pulley cannot be tightened at one time, and the crankshaft nut needs to be turned continuously. Until the belt is tightened. Take a closer look. It should be replaceable.