First, the paper requirements:
Cover, back cover, the body of A4 paper, white, bound size of 210 * 297mm (standard A4 size); construction plans and progress schedules using A3 or A4 white paper.
Second, the printing form:
for single-sided printing; should not appear front and back and up and down the reverse page; front and back cover should not show the binding needle and thread; all tenders are not allowed to use loose-leaf (perforated, folder type, etc.) binding.
Third, the layout:
1, the default format: 2, narrow format:
top margin of 26mm, the bottom margin of 22mm, the left margin of 25mm right margin of 25mm, the binding line is located on the left side of the paper 3mm (according to the number of pages to adjust). Layout header, footer, page number, header and footer font size: small five, header distance of 20mm, footer distance of 15mm, page number centered, line spacing is 1.5 times the spacing. General paragraphs using the first line indented 2 character format.
Fourth, the font:
"font" for the bold font, "font" for the non-bold font.
The title of the article for the three bold (can be bold), section headings for the small three bold (can be bold), the body font for the small four Song (not bold), all the font color is black. Chapter serial number should be used "one, two, three, ?" The chapter number should be "1, 2, 3, ?", "1, 2, 3, ?". Section number should use "1 2 3 ?" , "1.1 1.2 1.3 ?" "1.1.1 1.1.2 1.1.3 ?" .
The English font should be Arial, and the font size is the same as the Chinese font.
Where it involves legal statements, articles cited, the signing or affirmation of the agreement, the signature, seal and letter of the font should be used imitation Song GB_2312 four.
V. Forms:
All forms of the title for the four Song (can be bold). Form content in small four Song or five Song (not bold).
VI. Illustrations:
Illustrations should be suitable for the layout of the document size, should not exceed the margins; zoom in or zoom out of the picture should ensure good quality, or else should be adjusted to the appropriate size of the image processing software and then pasted into the document.
VII, electronic file format:
For compatibility considerations, the electronic file format should be used office97-2003 format, word extension: .doc, excel extension: .xls
VIII, on the original, copies and binding requirements
All the bids of the original and copies of the original should be bound into a book, the original a copy of a copy of the main text. The official seal of the bidder and the seal of the legal representative shall be stamped on the cover of the first and second bids. Cover requirements in accordance with the fixed format.
The copy of the bid binding requirements must be made more than one book, to the Technology Center to save.
Reference: Baidu library
Question 3: What size font is generally used in bidding documents You can get the layout and binding requirements from the bidding documents. Generally are four-size font. Maybe there are special, maverick, you do as required on the line. Save back to say you do not respond to the tender documents!
Problem four: the tender font, format what requirements Tender specifications: (if the customer has requirements strictly in accordance with the requirements of the preparation) 1 fonts and font size requirements title part of the font size requirements title 1: the use of two characters, bold, bold, centered; spacing: 0 lines before the paragraph, the paragraph after the automatic; special formatting: hanging indentation; metric: 0.25 cm; spacing: 1.5 times the line spacing; outline level Level 1; Line breaks and page breaks: choose page breaks before paragraphs and no page breaks in paragraphs; Title 1 adopts the format of "Chapter x xxxxx", set it in "Bullets and Numbering" after generating Title 1, choose multi-level symbols, set it in Customize, and choose "1,1,2" as the style of numbering. Style selection "1,2,3", in the number format appears before and after the number 1 respectively, to join the "first" and "chapter". Then select the left side of the level 2, in the previous level of numbering in the choice of level 1, in the numbering format appears in the number 1 after adding "...". , the numbering style select "1,2,3", to generate the second level of catalog number. By analogy, you can generate three, four and other directories to determine the preservation of the sub-numbering format, the generation of titles at all levels when the number is automatically generated. Heading 2: small two, bold, bold, left; spacing: automatic before the paragraph, automatic after the paragraph; special format: hanging indent; measure: 0.5 cm; line spacing: single spacing; outline level: 2; line breaks and page breaks: choose the same page with the next paragraph and the paragraph does not page breaks. Heading 3: in triple, bold, bold, left; spacing: automatic before paragraph, automatic after paragraph; special formatting: hanging indent; measure: 0.5 cm; line spacing: single-spaced; outline level: 3; line breaks and page breaks: choose to be on the same page as the next paragraph and not to be separated by pages in the paragraph. Heading 4: small three, bold, bold, left-justified; spacing: automatic before the paragraph, automatic after the paragraph; special format: hanging indent; measure: 0.5 cm; line spacing: single spacing; outline level: 4; line breaks and page breaks: choose the same page as the next paragraph and no page breaks in the paragraph. l Font and font size requirements for the body of the main text with small four Song font, special parts can be bold, underline or different colors, etc. to be marked. Special parts can be bolded, underlined or colored in different ways, etc. to be marked, and the line spacing is 1.5 times line spacing. The first line of each paragraph should be indented by two characters. For the parts that need to be explained, "●" can be used as a marking and "■" as a secondary marking. 3.7.2 Requirements for page form: No header/corner on the cover page. Catalog header/corner: place China Mobile logo on the left side of the header part, the text description adopts No.5 Song font, and the text content is consistent with the content of this part; the left side of the corner part is the company name, and the text adopts No.5 Song font; the right side is inserted into the page number, the font is bolded, and the format is "-x-", and the format of the page numbers is chosen as follows "i ii iii". Text content on the l Text header / page corner: header part of the left side of the placement of China Mobile logo, text description using the No. 5 Song font, text content and the content of this part of the same; corner of the left side of the part of the company's name, the text of the No. 5 Song font; the right side of the insertion of the page number, the font is bold, the format is "-x-", the page number number number format options "1, 2, 3". Pay attention to adjusting the page number (the text starts from "1", the table of contents is not counted in the page number). 3.7.3 Cover and catalog format requirements Cover format requirements The upper part of the cover page should be the name of "XXX Proposal", and the name of the proposal should include the name of the proposal, the name of the proposal, the name of the proposal, and the name of the proposal. The name of "XXX Proposal" should include the name of the client and the information of the project content. The font should be bold and centered with No.1 bold, the line spacing should be 1.5 times of the line spacing, and the spacing before the paragraph should be automatic, and the spacing after the paragraph should be automatic. In the middle of the bottom of the "China Mobile Group Corporation" (or "XXX Mobile"), with a three bold bold, centered, line spacing with 1.5 times line spacing. Below the time, with a small three bold bold, aligned in the middle, line spacing with 1.5 times line spacing. l directory format requirements directory page for the top of the word "directory", with a two bold bold bold, inserted in the middle of the two spaces, line spacing with 1.5 times line spacing, paragraph spacing for automatic, paragraph spacing for automatic. Insert directory format selection "formal", insert level selection "4", for special circumstances can be adjusted to introduce the number of levels.3.7.4 Printing and Binding Recommendations for the basic version of the program using ordinary A4 photocopier paper printed in black and white, the cover using color cover paper. Binding method using hard clip, glue ring or nail strip way, which the glue ring and nail strip binding method needs to be punched on the left side of all program documents. Annexes (templates, to be specifically adapted to the specific circumstances) The General Catalogue of Tenders Division I (Business) Thank you letter to the customer letter Tender Summary I. Tender Commitment II. Tender Opening Schedule III. Tender General Offer Table IV. Tender Itemized Offer Table V. Business Deviation Table VI. Technical and Service Deviation Table VII. ...... >>
Question 5: What are the requirements for the format, font and line spacing of the tender? Bid specification: (if the customer has requirements in strict accordance with the requirements of the preparation)
1 font and font size requirements
Title part of the font size requirements
Title 1: the use of two-size, bold, bold, centered; spacing: 0 lines before the paragraph, after the paragraph automatically; special formatting: hanging indentation; metrics: 0.25 centimeters; spacing: 1.5 times the distance between the lines; outline level: 1 Outline level: 1; line breaks and page breaks: choose page breaks before paragraphs and no page breaks in paragraphs. Title 1 adopts the format of "Chapter x xxxxx", after generating Title 1, set it in "Bullets and Numbering", select multi-level symbols, set it in customization, and select "1,2,3" in numbering style. ", in the numbering format appears before and after the number 1, respectively, to join the "first" and "chapter". Then select the left side of the level 2, in the previous level of numbering in the selection of level 1, in the numbering format appears in the number 1 after adding "...". , the numbering style select "1,2,3", to generate the second level of catalog number. By analogy, you can generate three, four and other directories to determine the preservation of the sub-number format, the generation of titles at all levels when the number is automatically generated.
Title 2: small two, bold, bold, left; spacing: automatic before the paragraph, automatic after the paragraph; special formatting: hanging indent; metric value: 0.5 cm; line spacing: single-spaced; outline level: 2; line breaks and page breaks: choose the same page with the next paragraph and the paragraph does not page.
Heading 3: in three-point, boldface, boldface, left; spacing: automatic before the paragraph, automatic after the paragraph; special formatting: hanging indent; measure: 0.5 centimeters; line spacing: single-spaced; outline level: 3; line breaks and page breaks: choose to be on the same page as the next paragraph and not to be separated by a page in the paragraph.
Title 4: small three, bold, bold, left-justified; spacing: automatic before the paragraph, automatic after the paragraph; special formatting: hanging indent; measure: 0.5 cm; line spacing: single spaced; outline level: 4; line breaks and page breaks: choose to be on the same page as the next paragraph and in the paragraph is not separated from the page. l The body of the part of the font font font requirements for the body of the text with a small four Song, the special part of the bold, underline or different colors and other ways to mark the special part of the text. Special parts can be bold, underlined or marked in different colors, and the line spacing is 1.5 times. The first line of each paragraph should be indented by two characters. For the part that needs to be explained, "●" can be used as the identification, "■" as the next level of identification.
3.7.2 Formatting Requirements
The cover page does not have headers/corners.
Table of contents header/corner: header part of the left side of the logo placed in China Mobile, the text description using the No. 5 Song, the text content and the content of this part of the same; corner of the left side of the part of the name of the company, the text using the No. 5 Song; the right side of the insertion of the page number, the font is bold, the format of the "-x-", the page number number digital format options "i ii iii". Text content on the l Text header / page corner: header part of the left side of the placement of China Mobile logo, text description using the No. 5 Song font, text content and the content of this part of the same; corner part of the left side of the company attack, text using the No. 5 Song font; the right side of the insertion of the page number, the font is bold, the format of the "-x-", the page number digital format selections "1, 2, 3". Pay attention to adjusting the page number (the text starts from "1", and the table of contents is not counted in the page number)
3.7.3 Formatting Requirements for Cover Page and Table of Contents
Formatting Requirements for Cover Page
The name of the cover page, the name of the "XXX Proposal", the name "XXX Proposal", the name "XXX Proposal", the name "XXX Proposal", the name "XXX Proposal", the name "XXX Proposal", and the name "XXX Proposal". The name of "XXX Proposal" should include the name of the client and the information of the project, the font should be bold and centered, the line spacing should be 1.5 times, the spacing before the paragraph should be automatic and the spacing after the paragraph should be automatic. In the middle of the bottom of the "China Mobile Group Corporation" (or "XXX Mobile"), with a three bold bold, centered, line spacing with 1.5 times line spacing. Below the time, with a small three bold bold, aligned in the middle, line spacing with 1.5 times line spacing. l directory format requirements directory page for the top of the word "directory", with a two bold bold bold, inserted in the middle of the two spaces, line spacing with 1.5 times line spacing, paragraph spacing for automatic, paragraph spacing for automatic. Insert catalog format select "formal", insert the level of choice "4", for special cases can be adjusted to introduce the number of levels.
3.7.4 Printing and Binding
It is recommended that the basic version of the program is printed in black and white on ordinary A4 photocopier paper, and the cover is printed on color cover paper. Binding method using hard clip strips, glue ring or nail strip way, which glue ring and nail strip binding ...... >>
Question six: formal point of the tender cover should be how to write It is said that the general cover of the formal instrument title are two words (with special requirements is a small beginning), bold, centered, the body is convulsive, Song, the first word aligned, the date is written in the bottom line of the four characters in Song, some need to add the logo of the company to the logo is written in the title of the following, if the logo are Chinese characters Can also be written on the top, must be centered
Question 7: the copy of the tender cover to write the copy and the original is the same, the only difference is that the original contains some things are originals, such as authorization what F. And the copy is stamped with the official seal, and the copy of the original is the same, the only difference is that the original contains some things are originals, such as authorization what F. And the copy is stamped with the official seal. And copies are stamped copies, in addition, in the evaluation of the bid, if the copy and the original content is not the same, then the original shall prevail. Therefore, the copy of course, and the original of the same writing on the cover.
Question 8: Can I change the font of the bid document cover format? Not the technical part. Are you asking whether the font of your tender documents must be consistent with the tender documents? The font of your bidding documents can generally be decided by yourself, unless the bidding documents have special requirements, please read the bidding documents for the specific requirements of the bidding documents.
Question nine: on the tender cover design A. These six words are: point, line, surface, black, white, gray.
1. Point, line, surface, is the basic elements of the design language. In the eyes of the designer, the existence of all space is composed of points, lines and surfaces. They are interwoven, fusion, set off, forming a kind of order and rhythm. Bookbinding design is the use of points, lines and surfaces of the world. Such as a word, a small graphic is a point, a line of neatly arranged words is a line; a graphic is a surface, a piece of text is also a surface, and the edge of the surface or line. Layout design, purely the use of points, lines and surfaces to organize.
2. Black, white, gray, refers to the relationship between light and dark design works. Any visual art, no matter how complex its form, change \ how rich, in the final analysis, are in the embodiment of black, white, gray interrelationships. Handled well, it looks comfortable; otherwise, it will give people a gray, messy feeling. In book design, dealing with the relationship between black, white, gray \ is particularly important \.
3. Points, lines, surfaces and black, white, gray does not exist in isolation, they are often a form of different ways of expression. For example, in a layout, where the word block is composed of dense lines, constituting a gray surface, illustrations or heavy titles form a black, the four sides will form a white. A layout design is good or bad, to a large extent, lies in how these relationships are handled.
4. The most basic requirement of layout design is to facilitate the reader to read, it can be very coordinated with the text content, to understand the content is helpful, so that people feel very comfortable reading; but it does not offside, does not seem to exist, will not affect people's reading process and emotions. The skill of layout lies in not seeing the skill, rather than independent of the text, so that the reader highlights it. The key to layout design is the use of points, lines, surfaces and black, white and gray means of coordination, adjust the ratio of the core and the four blanks, the use of appropriate fonts and line spacing. To pay attention to the rhythm of reading with the readers, strengthen the design of the first page and chapter headings, fonts should not be too flowery, in general, in a layout of no more than four changes. If there is no special requirements, it is best not to place random patterns in the four margins, because of that, the surface looks lively, in fact, will distract the reader's attention.
Second, five words are: font, graphics, color, composition, style.
1. Fonts in the cover should be treated as graphics, so, in addition to the accuracy of the word meaning, more consideration should be given to its position in the overall composition and word shape, size, sparseness, style. My personal experience is to be careful with handwritten characters and irregularly shaped fonts. It is not that we can not use, but more difficult, not as safe as the print. Because the choice of print, even if it is not appropriate, but not bad, but handwriting with the wrong, it will bring fatal damage to the overall design.
2. Graphics are figurative and non-figurative two categories, according to the content of the book to choose. Such as documentary, it is appropriate to choose figurative; such as romantic themes, it is appropriate to choose non-figurative. And the graphics must be selected and the text with each other, the composition of the trend and the main style should be consistent.
3. Color is before the text and graphics to move the reader's visual first language, the main color of each book should be in line with the text of the basic mood and style of the work. Although everyone's feeling of color is different, but the symbol of color meaning of the understanding of the same after all, such as white on behalf of purity, blue on behalf of romantic, purple on behalf of the mystery, green on behalf of life and so on. We can rely on people's general knowledge of color and feel to determine the main color of the book.
4. There are some basic patterns of composition, should be kept in mind in order to be flexible on this basis. It is the law of the important three points: First, symmetry, refers to the design elements to the central axis or center point of the same shape and amount of uniform distribution. Its strengths are stable, solemn, suitable for books with more serious content. But it also exists at the same time the lack of change, monotonous and dull shortcomings. The second is balanced, balanced principle of equal amount of unequal shape. It means that the design elements are not placed in equal distances, but large and small, light and heavy, far and near, giving people a sense of psychological balance. Successful balanced treatment is both reasonable and unexpected, making people feel lively, relaxed, vivid and interesting. Can highlight the spirit of the content of the book and the designer's artistic taste and wisdom. Third, contrast, contrast refers to the formation of different quality and quantity of the opposite things placed together, giving people visual differences and differences, such as size, height, thickness, near and far, dense and sparse, black and white, simple and simple, real and virtual, and so on. The application of contrast can make the picture produce changes and rhythm, so that the main and secondary clear, bigger and bigger, smaller and smaller, the image is more prominent. But the contrast should also pay attention to the degree, the picture should be ...... >>
Question 10: the original tender 2 words in which to write 5 points are generally used in the red original chapter stamped in the upper right corner of the cover of the tender documents, there is also a direct printing of the cover will be "original" two words printed on it. Look at the requirements of the tender documents, if there is no requirement for both.