Opening device: also known as the mouth opener, is used for respiratory distress or delirium need to gastric lavage and other instruments used to open the mouth. The body of the mouth opener is "U" shaped, the two ends of the body of the mouth opener are partially attached to a handle. The body of the cotter is elastic, and the two side arms of the body of the cotter can be bent to the inside or outside of the body of the cotter when compressed by external pressure, and when the external pressure disappears, the two side arms of the body of the cotter are restored to their original positions. In order to prevent the doctor's hand from slipping when holding the handle, the handle is provided with a numbness pattern on the outer surface. The disposable oral mouth opener adopting this structure is simple in structure, easy in operation, and inexpensive in cost, and is suitable for use in a variety of oral medical institutions, and is particularly suitable for use in oral medical surgery.
Hole opener (cutter): mounted on an ordinary electric drill, it can be convenient in copper, iron, stainless steel, plexiglass and other kinds of plates on the plane, sphere and other arbitrary surfaces for round holes, square holes, triangular holes, straight lines, curves, arbitrary cutting. Flexible, convenient, safe and versatile.
Punching machine: the principle of its punching is obvious, that is, by the four major parts cooperate with each other to complete the punching process. First of all, the material will move to the automatic punching machine camera scanning area, the camera scans the image after processing and give the control part of the signal, the control part of the signal received, and further processing and control the transmission part of the action, so that the punch in the plane of the X-axis, Y-axis alignment, complete the alignment of the action of the pneumatic part of the beginning of the work of the solenoid valve to control the cylinder for punching action. Automatic punching machine to play printing positioning holes, the whole action in one go, fast, accurate and efficient.
Pneumatic perforator: is assisted in the bag making machine of a perforated mold. A bag-making machine by the computer to give the signal transmission to the solenoid valve and then work the pneumatic mold. Its structure is similar to the cold punching mold. Mainly used for plastic bags, paper products punching.
Plastic bag puncher (so called pneumatic punching machine, punching machine): mainly by: cylinder, punch, guide sleeve, the lower mold, mold seat, five parts. The product belongs to the bag making machine accessories, principle: the bag making machine gives a signal, external air source, cylinder drive punch work, so as to achieve punching.
Curtain punch: small tool for punching curtain fabrics and other items, similar to a stapler. Applicable
Applicable to all models of perforated curtains perforation, replacing the manual digging procedure.
Manual punching machine, also known as: manual punching machine, manual punching machine and other aliases, which is mainly designed by the principle of leverage, the use of manual way to drive the perforating machine moving up and down the executive part with the lower mold to complete the perforation. Working mode: pure manual punching.
New hole punch: according to the human hand design, comfortable grip, the drill bit is made of hardened alloy material, punching sharp and clean. The other end can be used to assist in the installation of the reverse hook, work fast and save energy.