Cleaning steps are as follows:
(1) Turn off the air conditioner and cut off the power supply before cleaning the air conditioner.
(2) Remove the air guide plate and filter; remove the center frame screws to take off the shell, remove the remote control signal receiving board; remove the temperature sensor and remove the air guide blades.
(3) After vacuuming and then use a damp rag to wipe in the direction of the warping blade. If we have a special air conditioning cleaner, you can also spray it directly on the warps and let it sit for a few minutes for better results.
(4) Spray plastic shell cleaner to clean the wind wheel, brush the air conditioning wind wheel; after cleaning, we keep the panel open, let the warping piece dry naturally.
(5) The removed parts will be reassembled, and the indoor unit housing will be wiped clean with a rag.
(6) Turn on the air conditioner and set the airflow and cooling to maximum, keep the air conditioner on for 10 to 20 minutes and let the sewage drain from the drain.
Cleaning tools
(1) air conditioner cleaner, plastic shell cleaner;
(2) (cleaning air conditioner air blower), Baijie Brush (cleaning air conditioner aluminum fins);
(3) Baijie Cloth (2-3), screwdriver and other tools.
Reference:
(1) heat exchanger surface
This standard refers to the coil fin air conditioning equipment evaporator and condenser all with the impact of the equipment heat exchange efficiency related to the fins of the various heat exchangers inside and outside surface dirt.
(2) air supply mechanism
This standard in the coil-fin air conditioning equipment in addition to the evaporator and condenser two major heat exchangers, the supporting assembly of the air inlet components, filtration components, air supply components, air ducts and hoses, outlet components, condensate trays, the body shells, etc., and affect the quality of the equipment and the air conditioning quality of air supply mechanism of the internal and external surfaces of the dirt (and installation of the extension of the air duct). The air duct of the installation of the extension of the exception).
Cleaning steps
1? First of all, remove the air guide plate, filter; remove the frame screws to take off the shell, remove the remote control signal receiving board; remove the temperature sensor, remove the air guide blades.
2?Put on the air conditioning waterproof cover, spray air conditioning cleaner to clean the aluminum fins;
3 spray plastic shell cleaner to clean the wind wheel, brush the air conditioning wind wheel;
4?Brush the air conditioning aluminum fins, rinse the air conditioning wind wheel, clean the air conditioning drainage tank.
Second cleaning
The second big cleaning is carried out at the beginning of summer and winter every year to achieve the purpose of sterilization, disinfection and purification. Cleaning air conditioning, removing microbial growth, eliminating the root cause of bacteria, so that the fan sent to regulate the wind in line with air hygiene standards.
Reference: