With the legal concept of the depth of the people, the legal effect of the contract is increasing day by day, the signing of the contract can make our legitimate rights and interests are guaranteed by law. What kind of contract have you seen? Below I give you to organize the company's personal equipment repair and maintenance contract model, I hope you like it!
Company Personal Equipment Repair and Maintenance Contract Model 1
Party A: (hereinafter referred to as Party A)
Party B: (hereinafter referred to as Party B)
Party B's existing equipment ___ units, the list is as follows:
After the two sides of the negotiation, the two parties are now willing to Party B to give this equipment to do the party to do Maintenance service, and reached the following maintenance service terms:
First, the agreement period:
The validity of this agreement for a period of years, from the month of 2000 to the end of the month of 2000.
II. Amount of Agreement:
The annual equipment maintenance fee is RMB Yuan (capitalized).
Third, the payment method:
This agreement to implement the first payment after the service mode, that is, the signing of this agreement, Party B should first pay the service fee, the remaining service fee in the year before the date of payment.
Fourth, Party A's responsibility:
1, from the date of the signing of this agreement between Party A and Party B, Party A should be free for Party B to solve all the equipment within the agreement signed by a variety of hardware failures (Note: If you need to replace the accessories, Party A only charge the cost of accessories), and free of charge to answer questions raised by Party B in the process of using the equipment.
2, in the performance of the agreement, Party B can call Party A to ask about the use of equipment, Party A actively answer and provide Party B with a variety of preventive measures for equipment maintenance.
3, in the performance of the agreement, when Party A received a maintenance call from Party B, Party A within a short period of time, such as the phone can not solve the problem should be within hours to respond to the door-to-door service.
4, in the fulfillment of the agreement, if Party B's equipment has not been a failure, Party A every day to do routine checks on Party B's equipment.
5, service phone: 13767714___
6, service time: morning: 08:30 - 12:00, afternoon: 14:30 - 18:00 (such as special reasons, the two sides can be an exception to friendly consultation).
7, due to holidays and other special reasons, Party A can not provide door-to-door service within a certain period of time, Party A should be in advance of Party B equipment for a comprehensive inspection, so that Party B equipment is normally maintained.
Fifth, Party B's responsibility:
1, Party B in the confirmation of equipment failure requires maintenance, should be timely contact with Party A and explain the failure of the equipment to Party A maintenance personnel to provide maintenance site, and actively cooperate with Party A maintenance personnel to make it as soon as possible to eliminate the faults, so that the equipment works normally.
2, due to Party B failed to cooperate with Party A to maintain the inconvenience caused by the maintenance work can not be carried out normally, the consequences of Party B bear.
Sixth, additional terms:
This agreement in two copies, A, B, each party to take a copy of the two sides by the two sides of the seal or signature and pay the current maintenance service fee immediately after the effective date of the agreement to the expiration of the term of the natural termination and expiration of the agreement, each agreement has the same binding effect, the two sides should be *** with the implementation of the compliance.
Signature of Party A (seal): Signature of Party B (seal):
Date: Date:
Company's personal equipment repair and maintenance contract model 2
Contracting Party: (hereinafter referred to as Party A )
Contracting Party: (hereinafter referred to as Party B)
First, repair Repair Item , Quantity, Amount, Delivery Period Signing Time: Month, Year
Note: The above " other " costs include processing costs, auxiliary costs, transportation and towing costs, etc..
Second, repair repair material: Party B is responsible for Party A loader repair, repair process occurs in all the spare parts and related materials purchased by Party A organization, such as the need for Party B to provide, based on Party B to provide a list of materials and obtain Party A approval;
Third, repair repair quality requirements, technical standards: according to the repair of the industry's technical standards (GB/T3799.2) for repair, all the replacement of spare parts and technical standards (GB/T3799.2). The loss caused by Party A is responsible for;
Fifth, technical information, drawings and confidentiality requirements: No;
Sixth, acceptance criteria and period: according to industry technical standards in the acceptance of Party B's site, Party B in accordance with the provisions of the work period for the overhaul;
Seventh, packaging requirements and packaging costs: No;
Eighth, the settlement method and period: bank transfer or cash settlement, Party A acceptance of the overhaul;
Eight, the settlement method and period: bank transfer or cash settlement, the acceptance of Party A, the acceptance of Party B, the acceptance of Party A, the acceptance of Party A, the acceptance of Party A's site. Cash settlement, Party A after acceptance Party B issued a full invoice to Party A, Party A in the following month, a one-time settlement to Party B;
IX, breach of contract: in accordance with the "Contract Law";
X, if you need to provide a guarantee, a separate contract Guarantee ;
XI, to resolve the contractual disputes: both parties to negotiate a settlement or a decision of the local court;
XII, Other terms negotiated between the two sides:
1, Party B is responsible for the maintenance of the whole process of safety;
2, the two sides in the spirit of equality, mutual benefit, mutual assistance in the maintenance of equipment;
3, the start date by the two sides to negotiate the agreement shall prevail;
4, three copies of the contract, both parties to the signatures and seals take effect after both parties to discuss the matters not covered by the two sides to be determined separately.
Party A (official seal): _________ Party B (official seal): _________
Legal representative (signature): _________ Legal representative (signature): _________
_________ year ____ month ____ day _________ year ____ month ____ Day
Company's personal equipment repair and maintenance contract model 3
Party A:
Party B:
Party A and B, after friendly consultation, on the maintenance and repair of mechanical parking equipment in the underground garage in the district of ___, No. ___, Yingze Street, Taiyuan City, to reach the following agreement:
A, the contract Content:
Party A entrusted Party B to repair and maintain the mechanical parking equipment in the underground garage of No. ___ District, Yingze Street, Taiyuan City, and Party B's repair period should be repaired within two months after the entry into force of the contract, the longest not exceeding two and a half months.
Second, the amount of maintenance:
1, the repair and maintenance fee of RMB 2,000,000 yuan (including repair fee of 1,000,000 yuan, maintenance fee of 40,000 yuan).
2, Party B renovation of this equipment costs 50,000 yuan.
Third, the scope of Party B's responsibility:
1, Party B in the contract maintenance period as required to repair the garage equipment, functional repair, by Party B on the garage machinery and equipment parts of the refurbishment work, including spray antirust paint after the appearance of the color and performance and so on basically to the initial state.
2, Party B to ensure that repaired within one year after the equipment performance is intact, if the equipment failure, Party B received Party A repair calls, within 24 hours to the scene, 48 hours (from the point of receipt of Party A repair calls from the time of counting) to solve the problem (at night or on holidays within 48 hours to the scene and solve the problem); if the use of the equipment failure caused by any loss, Party B is responsible for compensation.
3, Party B in this contract agreed to repair and maintenance period, free of charge, responsible for the maintenance of the equipment, including the operation of the system debugging, inspection, maintenance, software upgrades and replacement of the parts required to order the supply (software upgrades are not charged separately).
4, if you need to replace parts, Party A in accordance with the contract price of the original accessories accessories payment, replacement, free of labor costs; such as Party A proposed a special change in the software, Party B to be charged separately.
Fourth, the scope of Party A's responsibility:
1, repair, refurbishment, maintenance fees in three parts:
(1), maintenance fee *** one hundred thousand yuan (lowercase: 160,000 yuan), payment standards: after the signing of the contract, Party A to Party B to prepay the repair price of 30% of the equipment is fully repaired has not yet been accepted to pay the repair price of 30% of the price by the Quality Supervisory Bureau and the person in charge of the Party and other relevant personnel Personnel **** with the acceptance and the Quality Supervision Bureau stamped after the issuance of certificates, will repair the price of the final payment to Party B.
(2), the garage renovation fee of 50,000 yuan payment standard: in the Party B on all related equipment refurbishment, painting and other work completed and acceptance, by the Party A one-time payment to the Party.
(3), maintenance fee **** four hundred thousand (lowercase: 40,000 yuan), payment standards: from the completion of the maintenance warranty period of one year after the completion of the maintenance period into the maintenance period, a maintenance period of one year, the annual maintenance fee of 10,000 yuan, in the beginning of each maintenance period by Party A to pay Party B, the maintenance period of four years temporarily agreed upon, the expiration of the period, the two sides to renew the contract separately.
2, Party A in the use of equipment found abnormal, should immediately notify Party B, but shall not be disassembled, or else the consequences at your own expense (resulting in losses borne by Party A).
V. Other:
1, any modification of the terms of this contract must be agreed by the two sides, and both sides of the authorized representative of the signatures of the two sides to confirm and stamp the official seal of the two sides of the contract for the validity of the modification of the terms of the contract, does not affect the implementation of the other provisions of this contract.
2, this contract in duplicate, each party to sign a copy, signed and sealed by both parties to take effect. This contract will automatically expire after the fulfillment of the terms and conditions of this contract.
VI. Liability for breach of contract:
1, Party A shall pay Party B the repair and maintenance fee in accordance with the contract.
2, Party B shall repair and maintain Party A's equipment according to the time agreed in the contract.
Party A: Party B:
Authorized Representative: Authorized Representative:
Date: Date:
Company's Personal Equipment Repair and Maintenance Contract Sample 4
Party A: ______ (hereinafter referred to as Party A)
Residence:
Party B: ______ (hereinafter referred to as Party B)
Residence:
In order to ensure the stable and normal operation of the office equipment of the ______ Group in ______ province, and to deal with the various problems that arise in a timely manner, after friendly consultation agreed to purchase office equipment services from Party B according to the following terms and sign this contract to z*** with compliance.
1, after consultation between the two sides to confirm, Party A to Party B to buy office equipment warranty services.
2, the total contract price: RMB capitals: ____________ yuan lowercase: ￥ __________________
(including routine maintenance, troubleshooting labor costs, does not include the replacement of another accessories, consumables)
3, the payment method:
Within one week after the signing of the contract, Party A to Party B to pay the contract The total amount of ______% (￥ ____________), six months after the implementation of the contract, Party A to Party B to pay the total amount of the contract ______% (￥ ____________).
4, another accessories, consumables settlement
Warranty period if the maintenance engineer confirms the need to replace the equipment accessories and consumables, customer service staff will coordinate the application to the Bureau, the Bureau approved, our company at cost price to provide the most favorable accessories and consumables, every two months settlement.
Fourth, the maintenance service life: ______ years (from the effective date of the contract)
Fifth, the rights and obligations of Party A and Party B:
1, Party B shall perform warranty service in accordance with the service process in the service program. (See Annex: Service Program)
2, Party B in the equipment inspection, maintenance or equipment sent for repair, the form filled out in triplicate to fill out, A, B and both sides to save a copy of the end of the month to submit a monthly report on services.
3, such as Party A has new equipment to join the service contract, Party B in accordance with the price of this contract, according to the month to join the warranty to do the average price calculation, in the service is due to be settled within 1 week.
4, Party B can be signed before the contract to the site to detect Party A to buy service equipment running status.
5, if the service life, maintenance products failures can not be repaired, Party A can ask Party A's . Technical departments and Party B together with the identification of both parties to confirm the replacement, the replacement of the service life of the equipment is still within the service life of this contract.
6, Party B for Party A to provide 7 _ 24-hour support phone: __________________, __________________.
7. Party A can supervise the service quality of Party B. If you are not satisfied with the service quality, you can call the complaint phone number: ____________, ____________.
Six, force majeure: If the impact of force majeure factors occur resulting in Party B can not fulfill the implementation of this contract, Party B will not be responsible. Party B shall notify Party A in a timely manner of the occurrence of the situation, and within 15 days to provide proof to Party A to be recognized.
VII. Dispute resolution:
Party A and Party B dispute over the contract, the two sides should be in a friendly attitude of negotiation to resolve, such as can not be resolved through negotiation, may be to the people's court of competent jurisdiction to bring a lawsuit. Except for the disputed terms, both parties continue to fulfill the rest of the terms of this contract.
This contract is in four copies, two copies for each party, signing place: ____________, effective immediately from the date of signature and seal of both parties.
Annexes to the contract: "equipment price list", "service program"
Party A: ____________ Party B: ____________
Representative: ____________ Representative: ____________
Date: ____________ Date: ____________
Company Personal Equipment Repair and Maintenance Contract Sample 5
Party A: (hereinafter referred to as Party A)
Party B: (hereinafter referred to as Party B)
The construction machinery used by Party B to regular maintenance and inspection, the implementation of health diagnostic services for the long term for Party B machinery Provide preferential parts and maintenance, so that Party B machine in the best operating condition, by the consensus of Party A and Party B reached the following agreement, the specific contents are as follows:
1, Party B user basic information:
User name: _______; Contact address: _______;
Contact person: _______; Contact phone number: _______ .
Mechanical information:
Machine type/machine number: _______;Engine type/machine number: _______;Working hours: _______;
2. Services provided by Party A:
(1) Lifelong labor-free regular maintenance service every 250h or 500h;
(2) At the maintenance of the At the same time, free of labor cost of the vehicle to carry out a comprehensive test, troubleshooting can be eliminated on-site;
(3) daily/weekly routine maintenance of the guidance and technical advice;
(4) to provide professional, fast repair services;
(5) to provide Komatsu, Shantui and other factories of pure spare parts;
(6) in the Nanjing Steel Plus purchased parts can be free shipping Delivered to the door (except for large parts);
(7) Mechanical failures caused by improper maintenance or repair by Party A shall be borne by Party A;
(8) Party A departs within 24 hours after receiving Party B's call for repair and promises to arrive at the scene at the fastest speed.
3, Party B to fulfill the obligations:
(1) Where to enjoy the above preferential conditions of service, Party B, need to buy parts in Nanjing Steel Plus Parts Supply Center or affiliated service outlets.
(2) Party B should ask for the formal invoice when purchasing the parts in Nanjing Steel Plus Parts Supply Center or service outlets. Party A will implement the relevant quality assurance based on the formal invoice provided.
4, the warranty period outside the maintenance of the fee regulations:
(1) the use of Party B's machinery in excess of the product warranty period when the failure occurs, such as the need for Party A to repair, Party B is required to pay Party A the appropriate cost of labor and mileage;
(2) the standard charge for labor: the standard labor hours of the maintenance fee, the cost of the unit price of labor to 80.00 yuan / hour;
(2) the standard charge for labor is: the maintenance of the standard labor hours charged, unit price of labor to 80.00 yuan / hour;
(2) the standard charge for labor is: the standard charge for labor, the unit price of the labor cost of 80.00 yuan / hour.
(3) Mileage charges are: charged to Party B according to the number of round trip kilometers, unit price mileage at 2.00 yuan / km.
5, the charging method and quality assurance: according to the total amount of each incurred expenses charged on the spot, Party B has the right to request Party A to pay the fee after providing a formal invoice. Party B can enjoy the guarantee period of three months for repair with the invoice and six months for parts.
6, Party B in the contract period must be purchased from the Nanjing Steel Plus Parts Supply Center or affiliated service outlets to buy accessories to buy spare parts, otherwise Party A has the right to terminate the contract;
7, this contract since the signatures of Party A and Party B came into effect, the validity period for the use of Party B's mechanical years, such as Party A and Party B, either party to propose termination of the contract, the contract will be automatically null and void;
8, This contract in duplicate, A and B each party.
Signature of the representative of the party A: Signature of the representative of the party B:
Date:
Company's personal equipment repair and maintenance contract model 5 Related Articles:
★ 2020 equipment maintenance service contract model 3
★ Common equipment maintenance contract regular version of 5
★ 2022 Equipment Maintenance Service Contract Model
★ Equipment Maintenance Contract Model 5
★ Equipment Maintenance Contract Model
★ 2022 Machinery and Equipment Maintenance Contract 5
★ Common Equipment Maintenance Contract Model
★ Equipment Maintenance Contract Simplified Version Model
★ Common Maintenance Contract Model 4
★ Equipment Repair Repair Contract 3 articles