I. How to clean the wall with a dot balloon
1. How to clean the wall with a dot balloon with a paper towel dipped in some alcohol (preferably with industrial alcohol, or use medical equipment), and then a few times to clean.
2. How to clean the wall with acetone. The method is the same as above. The amount is small and thorough, and the best part is that it removes these residual gels very quickly and easily, which is better than spraying.
3. How to clean the walls of the dotted balloon using nail polish. The usage is the same as alcohol acetone. The effect is also very good. Nail polish does not need to be quality, good or average, as long as it can wash off the nail polish.
4. How to clean up the wall of adhesive balloons using hand cream. First peel off the printing surface, then squeeze the hand cream on it and slowly rub it with your thumb, then you can pick up the adhesive. Slow down. Hand cream is an oil-based substance, the nature of which is incompatible with gum. Except glue is used for this function.
5. How to clean up the wall of the dot glue balloon using banana water. It is an industrial agent used to remove paint, it is also easy to buy (places that sell paint).
II. How to treat a wall renovation
1. When treating a wall renovation, the basic treatment of the old wall, and also the original wall decoration is cleaned, including wallpaper, paintings, nails and wooden decorations that must be removed. Generally, when the house stays for a long time, the walls are not too bad. Simply sandpaper them and apply latex paint. If the walls are in worse condition, the treatment will be more troublesome. First, all the putty powder on the wall must be completely removed, then new putty powder must be applied, and then latex paint must be applied.
2. When the wall renovation treatment, to clean the wall, there should be removed some powder to remove the location. Painted walls should be sanded.
3. When renovating walls, paint the primer and also apply it to the walls after polishing and flattening them. The primer is designed to resist alkali and moisture and protect the topcoat. If primer is applied directly without primer, after a long period of time, the walls are easily removed from powder and mold. They are also prone to discoloration from sunlight and other places.
4. Wall renovation treatment, large area repair, and repair painted walls is very troublesome. Small area repair can lead to serious differences in the color of the wall. Therefore, when repairing a large area, it is best to repair the entire wall together.
5. When the wall renovation treatment, anti-color difference, but it is best to use the same batch of materials in order to make the wall color consistent. It is important to prepare the materials adequately to avoid color difference caused by different batches of materials.
Three. What to pay attention to when renovating walls
1. Wall waterproof putty is used for more than 5 years. When renovating, you must clean the bottom of the wall, otherwise it will affect the quality and effect of latex paint.
2. After renovating the wall, you must ensure that the indoor ventilation is good, and poor ventilation leads to yellowing of the wall. Be sure to strengthen indoor ventilation. If you can not meet the requirements, you can place a few fans in the room to enhance ventilation. However, you should be careful about how long you use the fans to enhance ventilation. If the time is too long, the walls will crack. Usually thicker walls are load-bearing walls. When remodeling, take care to secure the supporting walls. Moving bearing walls will damage the structure and safety of the house.
The point of the balloon in the cleaning of the wall, do not know how to clean the wall, and the renovation of the wall, the above article is about the point of the balloon how to clean the wall and how to deal with the wall renovation, if you want to learn to send more information on the renovation, please continue to pay attention.