Scanner panel keys in the use of detailed answers MICROTEK scanner panel keys in the use of detailed answers MICROTEK scanner launched a series of scanners with panel keys, the use of these scanners with the keys, is able to greatly facilitate the use of the user's scanner. This part of the key operation, is a software and hardware integration of the system, included in the MICROTEK scanner driver software SCANWIZARD5, but not through the SCANWIZARD5 to operate, is a relatively independent system ("MICROTEK scanner configuration"). control). So the following on the use of the entire key part of the use of a usage of the introduction. I. Install the scanner correctly 1. Install the scanner's random driver CD-ROM and select SCANWIZARD5 to install. During the installation process, be sure to choose to install MicrotekFineReaderOCREngine, MicrotekChineseOCREngine these two items. It is in these two projects that the software control portion of the keypad is included.2. When finished, the computer restarts.3. The scanner is unlocked from the lens lock and powered on.4. The scanner is connected to the USB cable.5. The computer finds the scanner and recognizes it. (Use SW5.79 or above version of the driver, on WINXP, the user needs to let the system's installation program to read the random driver CD-ROM). 6. The scanner is successfully installed. The scanner detector in the lower right corner of the computer screen has found the scanner. II. Symbols and Functional Definitions of Panel Keys Users can learn the function of a key by looking at the symbols labeled on the key. The figure below, is the layout of the key panel of the MICROTEKSM5900 scanner. In reality, the layout of the keys will be different for each MICROTEK scanner, but the symbols on the keys, express the same meaning. The functions of each key, are as follows: Scan: Scans the image directly and automatically saves it as a file or transfers it to an application program. Copy: scans the image directly and transfers it to the printer, allowing your scanner and printer to form a copier system where you only need to set the number of copies. Email: Scan images and send them to your email editor. Text Recognition: The built-in OCR (text recognition) engine recognizes text and converts it into editable digital files.
Image Upload: uploads the scanned image to the Image***Help website and opens and displays the image through the default browser. Cancel/Setup: invokes the MICROTEK Scanner Configuration (MSC tool) when the scanner is at rest. Cancel the current scanning task when the scanner is active. User Definition: Customize the 4 most frequently used functions. -Power Saving: defines the on/off state of the scanner lamps. -Scanning: defines another scanning button. -Fax: Starts the fax driver installed on the computer. -Open Application: defines a runnable application program. When the scanner driver is installed and the scanner is recognized, the keys on the scanner panel are ready for operation. The use of keys, that is, in the scanner online normal, computer operating system in the lower right corner of the "scanner detector shows normal conditions, the user can press the button on the button, the computer will reflect and appear in the scanner is working on the dialog window, such as when the user presses the "Scan" button. When the user presses the "Scan" button, the computer screen will show the following picture, after the scanning is completed, the user can go to the desktop "MyImages" folder (shortcut) to find the scanned picture. Through this use, the user will be able to use the scanner is very convenient, do not need any operation, are using the mouse to click on the operation. Users only need to do some post-processing work, such as image cropping, adjusting color, contrast and other work, you can well complete the entire process of scanning. Third, through the "MICROTEK Scanner Configuration" tool, the function of each panel key to set up the entire key part of the function control, is controlled by the "MICROTEK Scanner Configuration" tool alone, with the user directly using the "MICROTEK Scanner Configuration" tool. The functional control of the key section is controlled separately by the MICROTEK Scanner Configuration tool and is not related to the direct use of the SCANWIZARD5 software on the desktop. This tool can be used only if the "Scanner Detector" in the lower right corner of the computer operating system shows a normal online status. The function of each panel button can be set in detail using the "MICROTEK Scanner Configuration" tool. As shown below: Double click and run the "MICROTEK Scanner Configuration" program. You can get the following picture: Fourth, "scan" function button settings: As shown, is the scanning function settings: "Original" selection items are: Through this function, you can understand the user's original type to determine the optimization of the program done. The default scanning method is "Photo".
The "Purpose" selection allows you to determine the approximate resolution of the scan. The default is screen display with an accuracy of around 72 DPI. When the user chooses to customize the case, you can type in the resolution you need to set. The following chart: "Scan Type" selection items are: "Delivered to the application" under the items are: Here, depending on the user's computer applications on the situation. Here you can introduce the "Customize" option, which allows you to select the software that will automatically accept the images. The default value is "None". "Scanning range" has two options, including "Auto Crop" function, can be done according to the size of the original, do a little edge cropping, leaving only the relevant content of the image. When the user needs to specify the case, the user can select the scanning range, the following chart: which when the scanning range of changes in the case, the right side of the small icon will do some instructions, the following chart: "Purpose" refers to the destination of the scanned image storage disk, by default, it is the C: \ProgramFiles\! Microtek\ScanWizard5\MyImages folder, in order to facilitate the user to find the directory, ScanWizard5 program installation is complete, in the user's desktop will create a "MyImages" shortcut, so that users can quickly find their own pictures. The program also allows you to choose the directory where the scanned files will be stored. At the same time, you can choose the name and format of the scanned files. The formats we support are shown below. The default is "TIF" format. Fifth, the "Copy" button in the function setting options, pay special attention to is that we have to provide "zoom ratio" and "print the number of copies" of the choice. Once the user has set up, you can work continuously. If the user needs to print in color, only need to check the "color printing" option on it. Six, "e-mail" button function set in this, users need to note that we only provide the system's default EMAIL editor, if some users want to use the FOXMAIL mail, you need to change the system's default mail system. If users need to improve the accuracy of scanning, only in the "Recipient Usage" column, select the custom function, so that users can confirm the resolution. At the same time, the scanned images, also have to do to keep. Seven, "text recognition" button function settings OCR language selection, in the system installed MicrotekFineReaderOCREngine, MicrotekChineseOCREngine, the default default appears to be "Chinese".
The work of this OCR is directly after the completion of scanning, directly in file format to save the disk. There are various formats, as shown below. By default, the results of OCR are stored in RTF format in C:\ProgramFiles\Microtek\ScanWizard5\MyImages\OCR directory below. VIII. Functional settings of the "Image Upload" button The realization of this function requires the user to apply for an account. The account application is provided by the ULEAD company in the randomized software. It is a free website.
￥
5.9
Baidu Wikipedia VIP Limited Time Offer Now Open, Enjoy 600 Million + VIP Content
Get it Now
Detailed Answers on How to Use the Scanner Panel Keys
Detailed Answers on How to Use the Scanner Panel Keys
MICROTEK Scanner Panel Keys
MICROTEK Scanner has launched a series of scanners with panel key functions, the use of these scanners with key functions, is to be able to greatly facilitate the user to use the scanner. This part of the key operation, is a software and hardware integration of the system, included in the MICROTEK scanner driver software SCANWIZARD5, but not through the SCANWIZARD5 to operate, is a relatively independent system ("MICROTEK Scanner Configuration") control). So here's an introduction to the usage of the whole button section.
I. Installing the Scanner Correctly
Page 1
1. Install the scanner's random driver CD-ROM and select SCANWIZARD5 to install. During the installation process, be sure to select the two items that install MicrotekFineReaderOCREngine, MicrotekChineseOCREngine. It is in these two programs that the software control portion of the keypad is included.
2. When finished, the computer restarts.
3. The scanner is unlocked from the lens and powered up.
4. The scanner is connected to the USB cable.
5. The computer finds the scanner and recognizes it. (Use the driver of SW5.79 or above, on WINXP, it is necessary for the user to let the installation program of the system read the random driver CD-ROM).
Page 2
6. The scanner is successfully installed. The scanner has been found by the scanner detector in the lower right corner of the computer screen.
The correct way to use the scanner
Often new employees come to the office, "How do I use this scanner?" Here I give you the correct way to use the scanner, I hope to help you, welcome to read!
The correct way to use the scanner
Scanning images
After the driver is loaded, the application software is used to get the image scanned by the scanner. The easiest and most convenient is to use the Windows system comes with the "drawing" software to carry out. Naturally, you can also use professional graphic image software, such as Photoshop to get the scanned image. The following is the use of "Paint" software as an example to explain how to get a scanned image.
(1) in the WindowsXP operating system, click "Start" ?ú "All Programs" ?ú "Accessories" ?ú "Paint". Drawing", the pop-up "Drawing" software window.
(2) Click the "From Scanner or Camera" command on the "File" menu bar to bring up the scanner window.
(3) Inside the window, there are four options, corresponding to the type of original we want to scan. If you want to scan a color photo, select the "color photo" item, put the photo into the scanner, cover, and click the "Preview" button. The scanner will start previewing and the pre-scanned image will appear in the right. Preview box on the right.
(4) Move, zoom in and out of the rectangular frame in the preview box to the appropriate size and location, and select the area to be scanned. Selected, click the "Scan" button, then the scanner will start scanning, the screen displays the scanning progress.
(5) scanning is complete, the picture will appear in the "drawing" software window small picture editing area, you can modify the picture, save and other operations.
Scanning text
The scanner also has a very useful function, that is, text recognition OCR function (OpticalCharacterRecognition, Optical Character Recognition), the printed article through the scanning, converted into text that can be edited, so that it greatly facilitates the text entry workers. To realize the text recognition, in addition to installing a good scanner driver and scanner application software, but also to install OCR text recognition software to be able to.
The first step is to scan the manuscript and then recognize it. Generally speaking, there are several steps:
(1) Scanning the manuscript. In order to use OCR software for text recognition, you can scan the manuscript directly in the OCR software. After running the OCR soft servant, the OCR software interface will appear.
The text to be scanned on the glass surface of the scanner, so that the side to be scanned towards the glass surface of the scanner and let the text of the divination end down, and the edge of the ruler aligned with the scanner cover, that is, the town is ready to scan. Click the "Scan" button in the window, you can enter the scanning driver software for scanning, the operation method is similar to scanning pictures. The scanned document image appears in the OCR software window.
(2) appropriate zoom screen. After scanning the manuscript, the beginning of the window to recognize the text to appear in the picture is very small, the first choice of "zoom" tool, the picture is appropriately enlarged to make the picture look more clearly. If necessary, you can also select the "reduce" tool, the screen will be appropriately reduced.
(3) correct the picture. Various types of OCR software provides a rotation function, so that the screen can be rotated at any angle. If the text screen is tilted, you can select the "tilt correction" tool or rotary tool, the screen will be adjusted.
(4) Select the recognition area. Recognition, select the "Set Recognition Area" tool, in the text of the screen box to identify the region, which can also be based on the screen box out more than one region. If the full-text recognition is not required to set the recognition area.
(5) Recognize text. Click the "Recognition" command, the OCR will first cut the text, and then recognition, recognition of the text will be gradually displayed. General recognition is complete, it will be transferred to the "proofreading" window.
(6) proofreading. Various types of OCR software provides proofreading and modification of the text is identified as a possible error in the text, with a more distinctive color display, and can be modified. Some software text proofreading tool can provide a number of words with similar glyphs for selection.
(7) Save files. Users can store the recognized file as a text (TXT) file or an RTF file in Word.
How to use the scanner needs to be how to operate
1, will be placed in the scanner scanning area, open the control panel, find devices and printers, find the "Scanning Documents or Pictures", open the settings and click on the scan, the document scanning process will pop up a window click on the "More Options", click "Browse" to set up after clicking OK.
2, the system will prompt you to select the device, point to the right of the small triangle, select you have installed a good scanner, according to the prompts step-by-step operation, and finally your scanning results will appear in your WORD document.
And now more and more people use printing, copying, scanning, faxing all-in-one machine, etc., so that the scanner is more and more widely used. Then how to use the scanner? The following and I came to see the operation steps of the scanner!
Scanner operation steps
Open the All-in-One scanner cover, the document or picture to be scanned face down on the bottom
Double-click on the computer "My Computer" in my `computer in the point of the scanner icon (the All-in-One installed after the driver has this icon)
In the pop-up dialog box, you can see the scanner icon, the scanner icon, the scanner icon and the scanner icon.
Select "Scanner and Camera Wizard" in the pop-up dialog box, and then click "OK"
Click "Next" to select the image type "Color Photo", paper source "Flatbed", and then click "Next"
Enter the file name, file format, and save location, such as I enter the file name "557", file format "JPG", save location "Desktop", click "Next"
Scanning begins. p>
Start scanning, there is a progress bar
After scanning, select "Do nothing, I'm done with these photos", click "Next", click "Finish! "
Then there is a "557.jpg" scanned image on the desktop, look at the effect of opening it
How to operate the scanner
Operating device: Dell PC
Operating system: Win10
Operating software device: scanner
1, first run the scanner, as shown in the following figure:
2, and then open the scanner in the computer, as shown in the following figure:
3, select the scanner and the camera wizard, as shown in the following figure:
4, click on the next step, as shown in the following figure:
5, select the type of picture color photo. Click Next, as shown in the following figure:
6, the pop-up dialog box, click Next, as shown in the following figure:
7, the scanning is complete, click Finish, as shown in the following figure:
8, and finally in the location of the storage to find the scanned document, as shown in the following figure: