Blister sealing packaging machine, also known as thermoplastic molding machine, is the heating of plasticized PVC, PE and other thermoplastic plastic coil suction made of various shapes of high-level packaging Juan box, frame and other products of the machine. Blister molding, also called thermoplastic molding, mainly uses the vacuum suction produced by the vacuum pump to make the heated and softened PVC, PET, PETG, APTT, PP, PE, PS and so on. Divided into daily necessities blister packaging, small hardware blister packaging, automotive products blister packaging.
1, the working principle
This process mainly uses the vacuum pump to generate the vacuum suction will be heated and softened PVC, PET, PETG, APTT, PP, PE, PS and other thermoplastic plastic sheet through the mold into a variety of shapes of the vacuum cover, blister tray, blister and so on.
2, common products
Daily necessities blister packaging, small hardware blister packaging, automotive blister packaging, electronic products blister packaging, food blister packaging, cosmetic blister packaging, computer peripherals blister packaging, toys blister packaging, sporting goods blister packaging, stationery blister packaging.
3, machine structure
The main structure is composed of feeding, pulling, upper and lower electric heating furnace, lower gate, multifunctional adjustable size, lower mold plate, upper mold, upper gate, knife gate, slicing, releasing the slice and with a vacuum device, etc.; to pneumatic device as the main power source, the pulling and feeding of the slice using electric, speed reducer, time relays, intermediate relays, travel switches and other electrical appliances, such as fully automatic control system. control system.
4. Advantages
(1) Easy operation: as long as you select the delay time, heating time, cooling time and heating current conversion gear, and manually rotate the disk table, the machine's delay system, heating system and cooling system will automatically operate to complete the sealing process.
(2) Three stations of the working table, fast packing speed and high production efficiency.
(3) The mold only applies to the edge of the blister part and the paper card partial sealing, does not affect the package, the blister part and the paper card can keep flat and beautiful.
(4) The body structure is solid, reliable and durable.
Second, how to operate the blister seal packaging machine
1, the blister has been shaped into the mold, and then loaded with the required packaging items, cover the paper card.
2, A-type rotating disk worktable, B-type rotating square disk worktable (C-type, D-type, E-type, F-type push-pull slide table table) to the appropriate position, trigger the travel switch, the platen downward pressurized by itself, the AC contactor is turned on, the heat, cooled to the set time, the completion of the seal, the platen back to the position.
3, the disk workbench 120 degrees rotation (B type will square disk workbench 180 degrees rotation, C type, D type, E type push and pull the other slide workbench, so that the second workstation into the sealing work position. A type three workstations or two workstations, B type two workstations (C type, D type, E type two workstations, F type a workstation) can be continuous work.
4, wait for cooling to complete the sealing process.
5, Note: If the blister is PVC material, the paper card over the ordinary blister oil or environmental protection oil can be, if the blister is environmental protection material, such as: PET material, be sure to over the corresponding environmental protection oil, remember not over the ordinary PVC blister oil, otherwise the two will be pasted not solid.