2, and then check whether the lubrication device is complete, complete, reliable, oil circuit is smooth, the oil label is visible, lubrication and refueling of various transmission parts.
3, check all kinds of pipeline, pipe fittings are intact, no running, bubbling, dripping, leaking, seepage phenomenon.
4, check the screws and fastening treatment, in order to prevent the use of falling off; check the transmission system of the operating handle, electrical switch position correctly without loosening.
5, check the integrity of the equipment and parts, accessories are missing, a variety of tools, accessories should be placed neatly, stored in an orderly manner.
6, clean all parts of the equipment, so that the equipment inside and outside clean, sliding rails and joints should be free of oil, rust, dust and debris, so that the paint to see the color, iron to see the light.
7, the operating position should be "a flat", "two clean", "three see", "four no ", which:" a flat "that is, around the workshop leveling;" two net "that is, glass, windows and doors, ground channel net;" three see "that is, the shaft to see the light, Ditch see the bottom, equipment to see the original color; "four no" that is, no oil, water, debris, garbage.
The above is the basic maintenance of Henan sewage treatment equipment, I hope that everyone in the use of equipment to actively maintain and repair, so as to extend the life of the machine at the same time so that the machine always maintains a high efficiency of the working state.