Product Characteristics
The new APRO Scale Inhibitor APROTREA?UC?III is a high pH detergent specially designed for the removal of organics, sludge, and other particles adhering to the surface of polyamide, polysulfone, and thin film component membranes.
This high performance powder has the following characteristics
1. Formulated from high performance polymers
2. Highly effective at both room and elevated temperatures
3. Suitable for all membranes except cellulose acetate membranes.
4, simple rinse and restart system
5, pH?12±0.5 adjustable
APRO Scale Inhibitor APROTREA?UC?III
Reverse Osmosis Membrane Cleaner Properties
The following are typical properties of APRO Scale Inhibitor APROTREA?UC?III. The following properties are typical of APRO's scale inhibitor APROTREA?UC?III, but should not be considered as indications of product availability. Product specifications are available upon request.
Appearance: Off-white? Granular powder? Slight odor
p?H: (1%? solution)?12?Calculated density 2.1
Cleaning guidelines
1.Check the cleaning tanks, lines and security filters, then drain the reverse osmosis system as much as possible.
2. Fill the entire cleaning tank with either demineralized or osmosis water. Add 5 gallons (19 liters) per four-inch element and 20 gallons (76 liters) per eight-inch element.
3. Add the solution to the tank again, slowly adding 1lb of Floclean?MC10 for every 9 gallons of water (or 15 g/l).
4. Heating the cleaning solution improves the efficiency of the cleaning process (don't exceed 110°F (43°C)?). .