Office furniture acceptance report can be divided into three parts to describe, first of all, you can describe the acceptance of what furniture, the second can describe the acceptance criteria for furniture, the third can describe the specific details of the collection.
Office Furniture Acceptance Report Sample 1:
My company and Shuozhou City, the four seas Shengda Business Trade Co. According to the needs, in addition to the office furniture ordered within the contract, subsequently ordered some additional office furniture (additional office furniture without a contract). As of April 27, 2014 all arrived, on April 30, 2014 the company sent the Ministry of Administration Wang Jianguo and Logistics Department Wu Zhijun and the supplier *** with the office furniture acceptance work.
After both sides acceptance confirmed that the supply and receipt of the same number. Unqualified for 12 solid wood conference chairs, 8 long coffee table without screw cover, other office furniture quality are qualified.
Statistics: office furniture totaling 296 pieces, a total amount of 185,660 yuan, our company has paid 70,000 yuan, respectively, on September 10, 2013 to pay Zhang Haisheng deposit 20000 yuan; January 29, 2014 to pay Zhang Haisheng furniture 30,000 yuan; February 15, 2014 to pay Zhang Haisheng furniture 20000 yuan, the remaining 115,660 yuan. The two sides negotiated to determine that the supply side of the remaining amount of money, and then preferential 2350 yuan, the actual unpaid furniture payment of one hundred and thirteen thousand three hundred and ten dollars (lowercase: 113,310 yuan).
Attached to the table is as follows:
Purchase of office furniture table
Company acceptance: supplier acceptance:
Two _ May 2, 2014
Office Furniture Acceptance Report Sample 2:
One, the acceptance of the paint products standard
1. Desktop flat and smooth, paint without particles, bubbles, slag points, no scratches, spoils, dust, etc., line uniformity, corner transition natural.
2. With mortise, tenon and tenon, nail connection fixed parts, contact points on both sides of the glue, the assembly connection between the parts should be tight, flat, excess glue should be cleaned up
3. Products with hardware connectors spliced together, the whole appears to be tight, the gap is fine and equal, with wood screws, round nails fixed to the requirements of the arrangement of the neat, and countersunk holes
4. Product provisions of the hardware and Some accessories shall not be less on, change, instead of.
5. Disassembly parts, reasonable structure, screw holes are smooth, easy to disassemble.
6. movable parts, doors, drawers, movable shelves open and close freely, the gap is even and coordinated.
7. The product as a whole, parts and components; vertical lines, horizontal lines, parallel lines shall not have deviation.
8. No obvious pungent odor. Formaldehyde and pollution odor whether exceeding the standard, the need for professional equipment testing.
Two, chair products acceptance criteria
1. sewing gap uniformity, smooth lines, smooth corners.
2. Chair body level, no left and right tilt when sitting, rocking phenomenon, front and rear tilt chassis without noise
3. Gas lever lift natural.
4. The back and base are full and flexible.
Three, hardware and steel products acceptance criteria:
1. The overall smooth, flat surface. Consistent color and luster, no scratches, cut and seal neatly, even gap, smooth lines after installation, neat angle
2. All weldments are firm, weld marks are smooth, smooth, no cracks, and the products are assembled with neat seams.
3. Plate and hardware bonding firm, corner gap are, transition natural, structural stability
Four, marble parts acceptance criteria:
1. Face color pure and turbid, should be clean, smooth, no abrasion marks, and color consistency, seams are, perimeter straight, inlaid true, the plate is not cracked, dropped corners, lack of corrugated, the plate is not a small air holes in the reverse side.
2. The joints at the plate splicing neat seams, natural transition, solid structure.
3. No pungent chemical odor
Office Furniture Acceptance Report Sample 3:
I. Installation
1. Installation conditions and installation of technical requirements
The site should be in line with the requirements of the furniture placement; the installer should have more than one year of experience in furniture installation.
2, installation procedures, methods and precautions
Installation procedures: (1) classroom and conference tables: table legs → center board → table legs → tabletop;
(2) cabinets: bottom board → neutral board → fixed laminates → side panels → backboard → top board → door
board → drawer → movable laminates.
Installation method: use a screwdriver to fasten the connecting rod to the embedded nut, insert the dowel pin at the same time when there is a locating pin, put the parts that need to be connected, and then put the eccentric parts into the hole, the arrow
direction of the connecting rod, and then tighten it in the clockwise direction with a screwdriver.
Precautions: Do not miss the positioning pin and connecting parts, many people work closely together, it is strictly prohibited to break by hand, do not
collision of surfaces; the method of disassembly and steps and the installation of the method of installation and steps in the opposite direction.
3, adjustment procedures, methods and precautions
First positioning, and then adjusted, and then fixed; according to the function of the hardware fittings to adjust from loose to tight; do not use too much force, in order to prevent damage to the product.
4, installation, adjustment of the acceptance of the test items after the method and judgment
(1) the overall structure of the product is solid, smooth landing, shaking components without loosening.
(2) drawer, cabinet door push and pull smoothly, loosening and tightening appropriate, no abnormal sound, peripheral gap uniform and appropriate.
(3) locks open flexible, no jamming phenomenon.
(4) track, door hinge hole position is correct, pull handles flush and symmetrical.
(5) drawer surface, cabinet door panels, countertops, drawer boxes and other panels combined flush.
Two, the use of
1, the use of
Lightly take and put, placed smoothly.
2, precautions and prone to errors in use and precautions
Strictly prohibit dragging and pulling, for the heavier furniture, such as classroom tables, conference tables, move must be disassembled into parts, and then assembled.
Avoid pollution, if sodium chloride liquid, acetic acid, ethanol, soy sauce, ink, iodine and other test solutions splashed on the surface of the paint film, please wipe it off immediately.
When new furniture is used, if there is irritating odor in the room, please pay attention to ventilation and emission. Do not put objects over 80?C on the paint surface for a long time to prevent burns.
When wiping furniture, it is best to use a soft cloth, avoid hard objects scratching, bruising, poking furniture paint film.
It should also pay attention to the activities of the pieces can not be too much force too hard, glass or mirror impact prevention, such as the convex parts of the handles may be hanging and pulling clothes, dismantling the structural parts of the shedding and so on.
Three, acceptance: our company will strictly in accordance with national standards and your requirements for their own inspection, with your acceptance. And fill out the relevant documents. In order to communicate with both sides.
The above is what I share today, I hope it can help you.