Peek board material is a good dielectric properties, and can also resist energy ray irradiation of the material. peek board material characteristics are very good, and a wide range of applications, the following is a specific introduction to the peek board material.
Peek sheet material is a high temperature thermoplastic material, its glass transition temperature and melting point are relatively high, so even at temperatures as high as two hundred and sixty degrees can be used. Heat resistance is better than other high temperature resistant plastics, but also has a high strength, and modulus, but also has good dimensional stability, self-lubricating is very good, processing is very simple, insulation and hydrolysis resistance is very good, good overall performance, is now the most used of a high-level plastic.
Peek sheet material main features
Peek sheet material working temperature can be as high as 260°. And even in a short period of time the temperature reaches 310 ° can be, its mechanical strength, as well as rigidity and hardness are very high, excellent resistance to high-temperature radiation performance, low flammability, in the combustion of a small amount of smoke.
Peek sheet material main characteristics
In the production environment, high temperature and high load, and some strong corrosion and so on the more severe environment is more common, but peek sheet material in this environment can still maintain very good performance, wear resistance. Can be a long time in the temperature of 260 ° environment, and mechanical properties will not change.
The coefficient of friction of peek board material is very low, so it can realize self-lubrication, the medium is oil, water or steam and weak acid and alkali, etc. will not affect the normal work.
For a variety of organic or inorganic chemical solvents will not be melted, has a strong corrosion resistance.
Peek plate material mechanical strength is very good, rigidity and surface hardness is very high, and molding is convenient, processing is relatively easy. Also not easy to be dissolved, flame retardant is very good, timely in the burning time is also low smoke and non-toxic.
PEEK board material type color
PEEK-1000 is brownish-gray, the main raw material used is mainly pure polyether ether ketone resin, toughness is the best, has a good impact resistance, the use of more is in the medical, pharmaceutical and some food processing.
PEEK-HPV? is black, is in the polyether ether ketone resin added PTFE?, graphite and carbon fiber. It has good friction properties, making it ideal for use in wear-resistant fields.
PEEK-GF30 brownish gray, which is a polyether ether ketone resin with 30%? Glass fiber, this has a stronger rigidity, as well as creep resistance, better dimensional stability, more suitable for the manufacture of some structural parts.
PEEK-CA30?black, in the polyether ether ketone resin filled with 30%? Carbon fiber reinforced, so the mechanical properties are better, the thermal conductivity is better, and the bearing surface dissipates heat faster.