(1) ABS: general use of general product shells, with good solvent strength, can be applied to the surface metallization project, such as water plating, vacuum evaporation plating, material specifications have sheet, round bar, etc..
(2) PMMA: acrylic, or plexiglass. Is a good transparent parts, the production of the best transparency of the material, can be applied to the dyeing, plating, spraying, screen printing and other methods. Soluble strength is still available, only brittle and fragile for its weaknesses, not suitable for card hooks and other institutions vulnerable to use.
(3) PP: translucent material, good impact resistance, excellent flexibility, can be applied to the production of strict conditions of impact resistance requirements, such as: automotive products, folding boxes and so on.
(4) PC: Strength, toughness, transparency are good material, suitable for Lens, fine structure of the parts production. In addition, glass fiber is added to improve the steel and heat-resistant sheet, which can be used to make parts that need to maintain high steel in a high-temperature environment.
(5) Aluminum-magnesium alloy: lightweight, good strength, is a consumer 3C like to choose materials. The disadvantage is that magnesium is a flammable metal, machining environmental control is very important, the modeling hazard is higher, the production of die-casting after machining works a lot, is a high-cost application of materials.