How to install the cabinet drawer slide rail
1. Install the drawer board.
Assemble the five plates of the drawer first, and then screw on the screws; The drawer panel has a slot with two small holes in the middle for installing the handle.
2. Install the track
Then, before installing the drawer slide rail of the cabinet, it is necessary to disassemble the rail, install it on the drawer side plate in a narrow way and install it on the cabinet body in a wide way. It should be noted that during installation, the lower part of the slide rail is under the side plate of the flat drawer and the front part is in front of the side plate of the flat drawer.
3. Install the cabinet
Screw on the white plastic hole on the side panel of the cabinet first, and then install the wide rail removed from it. A slide rail is fixed with two small screws one behind the other, and both sides of the cabinet should be installed and fixed.
How to remove the hidden drawer slide rail
1, pull out the cabinet
For the hidden drawer slide rail at home, you need to know what kind of rail the slide rail is, such as three-section rail, two-section rail and so on. Then according to the type of track, slowly pull out the cabinet, but it must be kept in a stable state when pulling out, so that the cabinet and track will not be harmed when pulling out.
2. Loosen the slide rail
When you pull out the drawer, there will be a long black conical button. Press the black long button by hand, the long button will stretch, and then the slide rail will feel loose.
3. Remove the slide rail
At the same time, both sides press the bar button downwards, and both sides pull out while pressing the bar button with both hands, and the drawer will come out, and then you can take it by hand.
What is the thickness of the drawer track?
Slide rail refers to the hardware fixed on the cabinet of furniture for the drawer to move. With regard to the thickness of drawer slide rail, the current standard dimensions are around 1.2, 1.2, 1.5, but the products produced by different brands are different, and there will be a certain gap. Therefore, when selecting the thickness of the guide rail of the cabinet drawer, it is necessary to be clear about the size of the drawer bearing, the type of the slide rail and so on.
What size is reserved for the drawer slide rail?
The reserved size of drawer slide rail installation mainly depends on the length of drawer, while the small depth of cabinet is generally the length of furniture drawer +4mm, and the length of slide rail must be less than the net depth of cabinet. Generally, the clear height of a drawer is greater than the length of the slide rail +4 mm, except the thickness of the drawer panel, the size of the slide rail of the drawer is less than or equal to the clear height of the drawer, so the slide rail meeting this size is suitable for cabinets. Give full play to the flexibility of the slide rail, and it is of course the most suitable for installation. If there is a deviation from the calculated size, the connection between the drawer slide rail and the cabinet will be defective, for example, the drawer is not close to the cabinet when it is drawn out.