Onen mechanical chiller is not new to people who are often exposed to the industrial side, but it is still unfamiliar to most people. Or hear the term on the association of course, of course, appropriate imagination is still good for brain health. But association is always imagination, water-cooled integrated chiller is what? What is the difference between it compared to the traditional chiller?
What is the European energy machinery water-cooled integrated chiller - Overview
Integrated water-cooled chiller, also known as water-cooled box-type industrial chiller, is a kind of industry for a variety of different processes, the equipment through the form of cooling to achieve the purpose of the process of a device. It is widely used in medical, food, biological, chemical, laser, metallurgy, mechanical equipment, electroplating, processing and other industries. Because the source of heat transfer is water, equipped with a special cooling tower, so it is called "water-cooled". In the refrigeration industry is divided into air-cooled chiller and water-cooled chiller two kinds of chiller, according to the compressor is divided into screw chiller and scroll chiller, in the temperature control is divided into low-temperature industrial chiller and room temperature chiller, room temperature unit temperature is generally controlled within the range of 0 degrees -35 degrees. Low-temperature unit temperature control is generally in the range of 0 degrees to -100 degrees.
Water-cooled integrated chiller
What is a water-cooled integrated chiller-rotation system
When the chiller refrigerant rotation system, the liquid refrigerant in the evaporator absorbs the heat in the water and starts to evaporate, and a certain temperature difference is formed between the ultimate refrigerant and the water, and the liquid refrigerant is completely evaporated and turned into a gaseous state by the compressor. Inhaled and compressed, gaseous refrigerant through the condenser to absorb heat, coalescence into liquid, through the thermal expansion valve throttling into low-temperature, low-pressure refrigerant into the evaporator, to complete the process of refrigerant rotation. When molding products with the chiller, due to the variety of raw materials, the size and shape of the molded product area, the clamping force required is also different, please adjust the clamping force according to the actual need for the lowest clamping force adjustment. This will save power consumption and extend the life of the machine significantly.
What is a water-cooled integrated chiller-operation safety
Industrial chiller in the use of the machine must pay attention to the operation of the safety of each operation at the beginning of the machine, please check the machine's safety devices, the safety of the top lever and the reliability of the safety door. During the operation of the machine, remember not to reach into the mold locking mechanism. When picking up the product, be sure to open the safety door and close it only after confirming that the personnel are safe and that there is no foreign matter in the mold. Also, do not put your hand between the nozzle and the gate of the mold during operation. When repairing the mold, turn off the oil pump motor. Screw chiller has the advantages of high efficiency, good performance, low noise, low vibration, energy saving, high reliability and long life. According to the customer's need and cold tonnage size, single or multi-computer combination is used. The compressor can be automatically alternated according to the load change, balancing the running hours of each compressor, greatly extending the use of the chiller unit's lifespan. The use of industrial 1. injection molding machine chiller model size selection for injection molding machine mold cooling, that is, the need to use 25HP chiller. Used for other equipment cooling, depending on the specific flow of cooling water circulation to determine the 2. chiller insulation tank and pump selection sometimes according to the actual situation of the customer's factory, open chiller, external pump, pump power requirements and the same type of box-type chiller requirements. 3. chiller return temperature, it is best not to be higher than 40 degrees Celsius, the higher the temperature of the water back to the compressor, the greater the damage.
See here, you should have a general understanding of the chiller, but also understand the difference between the water-cooled integrated chiller and the traditional type of chiller. In addition, the chiller in the major industries have a wide range of applications, common medical aspects, electric welding and even food processing industry, it is also the power system supply army Oh. Quickly go in-depth understanding of it!