Fujian medical equipment temperature limiter

The power indicator light of the electric water heater is on, but it does not heat up, which is caused by the damage of the electric heating rod. You can use the control terminal to open the shell of the electric water heater, see the electric heating rod fixed on the inner container of the electric water heater, remove it, buy one according to the specifications, shape and power, and reinstall it, and the problem can be solved.

There are several reasons for not heating:

The thermostat is disconnected, and the heating pipe of the electric water heater is provided with an anti-dry-burning thermostat. When the thermostat is disconnected, the electric heating tube is open and needs to be reset manually. You can measure it with a multimeter. There is electricity in the front stage of the thermostat and no electricity in the back stage, which means that the thermostat has jumped. Press the reset button to restore.

The electric heating tube is broken If the electric heating tube is broken, it can't be heated. You can use a multimeter to test whether there is electricity on the electric heating tube. If there is electricity, the heating pipe is broken and there is no heating, so it needs to be replaced.

Relay failure. If there is no electricity in the front stage of temperature control, it should be that the relay is broken. It is necessary to remove the control panel and replace the relay.

The resistance wire in the heating pipe is broken.

Extended data:

Water heater refers to a device that changes the temperature of cold water into hot water through various physical principles in a certain period of time. According to different principles, it can be divided into electric water heaters, gas water heaters, solar water heaters, magnetic water heaters, air water heaters, heating water heaters and so on.

Manufacturing a cold air part and manufacturing a hot water part. In fact, these two parts are closely related and inseparable, and they must work at the same time. That is to say, while making hot water, cool the kitchen. Or while cooling the kitchen, it is also making hot water.

Extended data

The electric water heater can't heat, but the indicator light is on for the following two reasons:

Cause 1: Poor contact or broken wire at the plug end of the heating pipe has been dealt with, and it has been removed after disassembly and inspection.

Reason 2: The heating tube was burnt out and replaced.

Note: It is recommended to contact professional after-sales personnel for replacement, because this kind of electrical appliances is very professional.