1. The use of computer control: the computer to complete all the arithmetic work, the carving machine in the work of the computer is in a working state, can not carry out other typesetting work, the computer is in an exclusive state, this is the basic form of work. The advantage is that you can use the computer above the various programs directly modify the pattern, so that their processing patterns can be sent to the engraving machine faster. The bad thing is that you need to use a computer. The principle is: the use of a board access to the computer, and then line access to the engraving machine control system.
2. The use of handle board control: the controller in the engraving machine work at the same time as the layout, direct operation. The advantage is that the direct operation, convenient for some customers who do not use the computer temporarily. The bad thing is: the handle controller buttons will be easy to bad, in addition to design patterns need to design their own elsewhere to send to the controller above.