Common faults of automatic glue dispensing machines are:
1. Bubbles are generated in the glue fluid: During the use of the fully automatic glue dispensing machine, excessive fluid pressure opens the glue dispenser externally. When the valve is opened, air may penetrate into the glue, causing bubbles.
2. Glue leakage occurs when the automatic dispensing machine is used: the dispensing valve is closed normally after use and glue leakage occurs. This is because the configured needle is too small, which affects the flow of the liquid and causes back pressure. .
3. The flow rate of the fully automatic dispensing machine is too slow: If the glue flow rate is too slow, it is mainly because the hose is too narrow or too long. Of course, you must also pay attention to whether the glue outlet and air pressure are in normal conditions.
4. The glue output of the platform dispensing equipment is inconsistent: The inconsistent glue output is mainly caused by the pressure cylinder that stores the glue fluid and the unstable air pressure of the machine configuration. If there are other problems, please look for Ruidexin automatic dispensing machine