What is a nebulizer? How many kinds of atomizers are there? As the most important part of the vapor cigarette, the atomizer includes the inner core heating wire and the liquid chamber. The core or heating wire is a replacement part, the working principle: through the airflow induction or button, make the battery work, connected to the atomizer, so that the heat, vaporization of tobacco oil, resulting in atomization effect, to achieve similar effects with smoking. The following is my compilation of what is an atomizer and the classification of atomizer content, welcome to read.
Classification of atomizers
Disposable cartomizers cartomizer
Storage atomizers (small) clearomizer/ atomizer
Storage atomizers (large) tank atomizer
DIY storage oil large RTA/RBA (rebuildable tank atomizer)
DIY dripper atomizer RDA (rebuildable dripper atomizer)
The finished atomizer does not require the user to manually create the coils, and can be used by adding liquid directly to the atomizer, which is simple and convenient. The only thing you need to do is to replace the internal atomizer cartridge at the end of the process. Finished atomizers can also be rebuilt manually, but in a much more difficult way than RBA RDA atomizers.
DIY atomizers, as the name suggests, require the user to manually build the coils, and are suitable for those who have a certain degree of hands-on ability and are looking for the ultimate in taste.
RDA dripping atomizers, generally not with oil tanks, but now some RDA atomizers are also with, suitable for the pursuit of extreme smoke players, with mechanical batteries to use, free from the general limitations of the general RDA atomizers are used to "play".
Atomizers are roughly divided into three categories
Core replacement type, oil drip type, homemade type
Core replacement type: the main body of the atomizer for the liquid smoke warehouse, the heating wire we call the atomizer core, the atomizer as a whole through the installation of the atomizer core in order to work properly, and the atomizer core is usually the manufacturer made good replaceable parts. The core is usually a replaceable part made by the manufacturer. The shape is generally more business, more portable more.
Drip oil type: belongs to the homemade heating components of the atomizer, characterized by a huge amount of smoke, pumping a few mouths to open the lid in the oil drops into, no oil compartment. It's a good idea to play around with it and forget about it for long term use. It's a short form, but it's a strong one.
Homemade: This type of atomizer has a certain degree of difficulty, and is not recommended for beginners to try.
Electronic atomizers
Electronic cigarettes for newcomers to the entry level of the problem
1, what is called rebuildable atomizer?
Rebuildable Atomizer, or RBA for short. means Rebuildable Atomizer. It is a collective term for all atomizers that can be assembled.
Rebuildable Dripper Atomizer, abbreviated as RDA. it refers to dripping atomizers, which are generally used for big smoke and competition.
Rebuildable Tank Atomizer, or RTA for short, refers to a reservoir atomizer that allows for continuous vaping and is the most common choice for smokers.
Cleaning Atomizer, alone, refers to a finished atomizer that is not assembled. After a certain amount of consumption, it needs to be replaced with a new one.
2. Why do air holes leak oil?
The oil compartment is not tightened, the rubber ring in the sealed compartment is cracked, and the installation of the atomizer rubber ring is not restored. But there are also instances where the sealing quality is not up to par due to the purchase of an inferior atomizer.
3, why smoking e-cigarettes will have the feeling of fried oil?
The general reason is because the heating wire is too close to the air outlet, due to the existence of capillary phenomenon. Some of the oil is not atomized and is pumped up directly through the air inlet channel. Recheck the position of the heating wire and adjust the distance between the cotton core and the air inlet to solve the problem.
4. Why is the transparent compartment I'm using cracked, is there any way to fix it?
Transparent bins refer to the oil storage bins made of acrylic or PC material in oil storage atomizers. If they don't fit well with the hardware, they will crack under thermal expansion and contraction. After cracking, it is not easy to repair and need to be replaced with a new one.
5. What is an atomizer short circuit and is it dangerous?
The bottom of the atomizer has a positive and negative poles, generally use T-type rubber or silicone material as insulation, short-circuit is that the current does not pass through the heating wire, but the bottom stroke of the short-circuit, which is short-circuited. Battery with program version, then there is no danger, just the battery does not work, has been flashing lights.
6, what is a single shot? Double hair? Is there any benefit of multiple shots?
Single hair, double hair refers to the number of heat wire installed on the atomizer. By increasing the number of wires, it changes the contact area of the wires when vaporizing the oil, thus creating a larger volume of smoke. If you are not familiar with the knowledge about resistance and voltage. It is recommended that you start with a single shot.
7. Is it more expensive to have a single shot or a double shot?
The hot wire is equivalent to an electrical appliance in the whole circuit cycle of the e-cigarette. The more electrical appliances you have, the more power you consume.
8. Is there any benefit to a drip oil atomizer?
Drip atomizers generally use low resistance, high power output. Low resistance instantly generates a lot of heat, need to evaporate a lot of smoke oil, in the hot wire on the cotton core directly drip smoke, is the most effective and fastest method of oil conduction. At the same time the super-large smoke will also make some of the taste of the oil to the extreme, is the ultimate choice of advanced players. But the drawbacks of oil dripping atomizers are equally obvious, it requires strong hands-on skills and professional knowledge, while consuming the oil is not generally fast. If you are a novice player, it is recommended to start with finished atomizers and oil reservoir atomizers.
9, stainless steel chamber, glass chamber, acrylic chamber?
This refers to the material of the oil storage atomizer carrier. Each has its own advantages and disadvantages, stainless steel warehouse is strong and beautiful, but the consumption of tobacco oil in the warehouse can only rely on taste and experience to judge. Glass silo is fragile, but how much oil is left in the silo is very intuitive. The acrylic tank is easy to install, and in some atomizers, the oil capacity is higher than the other two. However, it also has the disadvantage of being fragile, and most importantly, the acrylic chamber is not suitable for all oils, as some oils with a high glycerin (VG) content may cause the acrylic chamber to crack.
10. Does the XXX atomizer consume oil?
The consumption of oil has very little to do with the atomizer itself. It only has to do with the number of hot wires you set, the speed of oil conduction, and the output power. As long as you're not looking for high power output, the oil consumption of all atomizers is generally not too high. It's like driving a high-powered SUV and a family economy car, the same driving 100 kilometers, the fuel consumption is absolutely different.
11, how to make big smoke?
We do not recommend that all newcomers to try a big smoke, which requires a certain amount of related knowledge accumulation. Generally speaking, high power, low resistance, and high speed will produce big smoke. The term "big smoke" is generally used to refer to players who use oil dripping atomizers.
12. Will XXX atomizers burn the core?
Any atomizer will burn the core. The difference here is that due to the inexperience of new players, the wick is set too tight or too far away from the oil guide hole, resulting in a poor oil supply, which can leave the wick in a dry burning state. It can also be due to the initial power is too large, for the hot wire to bring too much heat, the surface of the cotton core will instantly burn the paste, both will produce burn core. The pursuit of the optimal balance of power and oil conduction speed is what we promote.
13, drip oil how to play?
Drip oil atomizers have a large number of loyal fans due to their simple structure, easy disassembly, and large smoke volume. It is the play of dripping oil directly on the hot wire and releasing a large amount of smoke by vaporizing the oil through the instant high heat of the hot wire. In order to pursue the ultimate effect, oil dripping players usually set up multiple hot wires, in terms of installing hot wires, it still requires some . experience and skill. And the more hot wire, the more related to the voltage and resistance involved, please understand the oil dripping equipment in depth before you make a choice.
14, oil drip atomizer hot, what is the reason?
The general oil drip atomizer is much shorter than the oil storage atomizer and finished atomization. And the heat generation is large, in the process of continuous smoking, the hot wire has not been completely cooled down, and then again for ignition, there is heat accumulation is completely normal. However, please ask the player who installs the Multifire to carefully check whether there is a short connection between the connecting legs of the hot wire before closing the chamber. This phenomenon also produces high heat buildup and can easily burn the filament off, which is still a risk. If it does get hot, since the input power of the mechanical rod cannot be changed, lower the number of hot wires or raise the resistance and add more cotton to the cotton core to increase the cooling rate. High-power electronic rod players, try to reduce the output power, usually can be solved.
15, I use XXX rod, with what atomizer is good?
Rods and atomizers are both part of the mod, and can be understood as two independently existing parts. Any atomizer can be connected to any rod as long as the interface is right. The rod is just a battery compartment, nothing much to the final taste. Learn more and ask questions, there is no one atomizer that fits all players perfectly. It's wise to find the atomizer that you like best, that you get the most out of, and that instantly feels like you've improved your style a lot.
16, why do I have a stabbing sound when I smoke an e-cigarette?
That's because of the sound produced when the hot wire vaporizes the oil, and generally the greater the speed of the oil supply, the more pronounced this sound is. With a well-balanced atomizer setup, this sound should be subtle but beautiful.
17. Why do I feel like I'm smoking a mouthful of oil every time I take a drag on my e-cigarette?
This is generally caused by the fact that the speed of your oil supply is too high, the smoke is too strong, and the oil is sucked into your mouth before it is fully atomized into smoke. However, there are also cases where the oil is not sealed properly and leaks into the vent pipe, where it is not atomized and is sucked directly into the mouth. Please double check that the oil supply speed is not too high, and that the sealing chamber is not oozing oil.
18, finished atomizer core general life is how long?
Depending on how often you use it. The rate of depletion of the finished atomizer will not be the same. Generally a very simple way to judge, is the same flavor of the tobacco oil in your mouth began to change the flavor. Then it is the finished atomizer, soon need to be replaced.
19, if the oil is not sufficiently atomized there is no harm?
Although the composition of the quality of the oil is not harmful to the human body, but the un-atomized oil will greatly reduce the feeling of using e-cigarettes. If you feel that the atomization is incomplete, reduce the speed of oil introduction, or increase the output power. Both are good ways to deal with it.
20, after smoking, a layer of white on the mouthpiece is what?
It is the residue of human saliva on the mouthpiece, which dries up and is formed. Don't worry, just use a wet tissue to clean it up.