Cad graphics put the model into the layout method-1, and enter the layout interface.
2. The whole model has a small white frame with a miniature figure in it. You need to reinsert the frame in the layout and determine the size of the frame according to the scale you need to print.
3. Click the "Define Viewport" command (available in the menu) to automatically enter the model space, then frame the parts to be printed, and then click "OK" to automatically return to the layout page. At this point, a graphic area will be generated. Confirm according to the scale to be plotted (1: 100, enter 100), and move the viewport box for confirming the scale to.
4. Just repeat the above steps and define all the diagrams in the model. Sometimes you are not sure how big the chart is. You can define a viewport first, and then insert a graphics box.
? Method 2 of putting the model into the layout by cad graphics: Step 1: Click on the model first.
Step 2: Double-click the middle blank of the model.
Step 3: Turn the middle mouse wheel and move the picture to the appropriate position.
Step 4: Double-click the blank space outside the model to finish.