1, turn on the power, according to the need to toggle the power selector switch, that is, the power indicator light. Power selector switch points to the vacuum for vacuum sealing, pointing to the vacuum inflatable for vacuum inflatable sealing.
2, will contain items of plastic bags placed in the vacuum chamber, bag mouth neatly placed on the heat sealing strip.
3, press down the cover, the panel pumping (vacuum) indicator light. The vacuum pump starts to pump, the cover is automatically sucked, vacuum knob can be adjusted according to the packaging requirements of the vacuum level, adjustment, depending on the scale from low to high, the amplitude should be small.
4, the need for vacuum packaging products bagging, and then put the open end to the sealing strip and pay attention to keep the bag straight, if the bag is small bags can also be side-by-side multi-bag simultaneous packaging.
5, when the pumping reaches the set time, that is, the end of the pumping, pumping indicator off, inflatable indicator light to indicate the start of inflation. The inflation knob can adjust the inflation time, the same method as above. If you do not need to inflate, the power switch to the vacuum position, the program automatically into the vacuum packaging, inflation indicator off.
6, pumping or inflation is complete, the indicator light goes out, heat sealing indicator light, that is, into the sealing program, the panel is equipped with heat sealing time and temperature adjustment knob to adapt to the different thickness of the material, adjusting the time and temperature, rotary amplitude should be small, to prevent a sudden increase in the temperature of the heat sealing, heat sealing accessories to prevent burned.
7, when the set heat sealing time, heat sealing indicator light off, to see the end of the heat sealing, that is, the vacuum chamber through the solenoid valve into the atmosphere, until the cover automatically lifted to start, the vacuum inflatable packaging process is complete, ready for the next packaging cycle.