Laboratory work is the lifeblood of the production unit, reliable data supply is the basis for the sales department to speak. Therefore, it is very important to do a good job in the laboratory. I do as a laboratory old staff, in order to do a good job in the laboratory, it is necessary to strengthen the study, and constantly improve personal skills and business level. Here is my laboratory work for you to bring the self-identification of five, I hope you like!
Laboratory work self-assessment 1
Unconsciously, another in the busy and full of the school year is coming to an end, in this year, science, chemistry, biology three laboratory work seriously responsible, enterprising to do a good job in the experimental work of their own disciplines. To comprehensively improve the quality of students' scientific experiments to create the conditions, but also to stimulate the students' interest in learning subjects, science, chemistry and biology of the subject of education and teaching to improve the power of the self. Now the work of the academic year is identified as follows.
First, do a good job of teaching the current teaching materials under the regular work
1, standardize the management of the laboratory, so that the books are complete, complete procedures, strict implementation.
In the work of the laboratory, laboratory management is often overlooked, our Guanghua High School laboratory has been composed of self-characterization. At present, the laboratory of the rules and regulations to have been in place, the laboratory of a variety of accounts in 26 kinds of information, which should be on the wall of the 5 kinds of early has been all on the wall. Book information has also been all registered, for the majority of teachers and students to carry out experiments to provide a great convenience. In order to be more strictly regulated, in carrying out a variety of experimental activities, whether it is a demonstration of experiments, or student group experiments, it must be done first experimental notification form, and then arrange the relevant experimental activities. After each experiment should be the experimental records, experimental information feedback and comments. For the laboratory supplies to be purchased, to do the first shopping application and plan, and then procurement, and in accordance with the financial system, new items into the laboratory, immediately after the acceptance, and register, into the room into the cabinet, into the special management procedures. For damaged items, there are records, compensation registration, there are parties to the forensic word and proof, after the report of loss in a timely manner into the relevant accounts, so that the accounts are consistent with the accounts, the accounts are consistent.
2, the strict implementation of the tasks and requirements of the laboratory work: in accordance with the requirements of the high school syllabus, according to the annual plan, the laboratory enterprising to play its function, for the school's science, chemistry, biology, the subject of education and teaching to do their best. This semester the laboratory this piece of **** completed teachers demonstration experiments 228 of which 90 physical demonstration experiments, chemical demonstration experiments 108, biological demonstration experiments 20, opening rate of 108%, to ensure that the school's education, teaching and learning tasks, and experimental results, students gained more, experimental safety, science, chemistry, biology, three subjects are no experimental accidents.
3, strict laboratory regulations, so that the work of the laboratory arrangements and use into the right track process. Teachers also in accordance with the teaching schedule and laboratory requirements, to do demonstration experiments 2-3 days in advance, student group experiments a week in advance to send a notice. Instruments and medicines are prepared in accordance with the teaching materials and teachers' requirements. Demonstration experiments require classroom teachers to the laboratory beforehand personal experiments, group experiments self and classroom teachers in advance experiments to ensure the smooth progress of experiments to ensure the successful completion of the teaching task.
The general scenario, the use of the laboratory follows the following process:
The classroom teacher notified in advance → the actual preparation of instruments and medicines → the classroom teacher in advance of the experiment → the conduct of the experimental class → the return and organization of the instrument.
Students into the laboratory, our teachers strictly require students, experiments must be gained, the basic operation and procedures of the experiment must be done meticulously, to treat each experiment with a scientific attitude. Always require students to do to care for public property, in strict accordance with the requirements of the experiment to carry out experiments. Students group experiments, before the experiment, students check the laboratory equipment and experimental instruments are intact, whether the drug is complete, and fill out the experimental scenario registration form. In the course of the experiment, be ready to replace damaged instruments and missing drugs and register them. After the completion of the experiment, check the laboratory equipment and instruments, and make a record of those who damaged the equipment and instruments and pursue the relevant responsibilities. After the experiment, students are required to pay attention to laboratory hygiene, clean and organize in a timely manner.
Second, forge ahead with the implementation of the new curriculum
The new curriculum standards relative to the existing textbook changes are more obvious, the course is divided into mandatory and elective courses, experiments are also divided into validation experiments and exploratory experiments, increasing the breadth and depth of the experiments, the current primary task is to study the new textbook, and a wide range of information, learn other schools to open a better experimental methods, under the existing conditions. Under the existing conditions to better cooperate with the teachers, to complete the teaching task, and further improve the quality of teaching.
1. Study the new textbook
For the experiments involved in the new textbook, under the conditions given by the textbook to do further research, improve the experimental conditions, with teaching materials, in order to achieve the best experimental results, so as to improve the quality of teaching. Due to the uncertainty and exploratory nature of the experimental results, and the new textbook involves more experiments, and the information that can be accessed and can provide less reference material, so this is a long-term task.
2. Learning and exploring advanced management methods
New textbooks and new teaching methods means new management methods and tools, new experimental methods, good methods need to be explored step by step, in the current implementation of the new curriculum, we have to forge ahead to invest in the process, to be well-prepared, after in-depth study, the use of the advantages of the network, to learn from the advanced experience of some regions, advanced methods, lessons learned, in conjunction with our school, and to learn from the experience, the advanced methods, and to learn from the mistakes of the past, and to learn from the mistakes of the past, and to learn from the mistakes of the past. Methods, lessons learned, combined with the actual situation of the school, the laboratory, make full use of existing equipment, existing resources, constitute a set of effective management methods, and in the actual implementation of the basis of continuous improvement, so that it can better serve the teaching and learning to better complete the teaching task, training students, improve students' experimental skills, thereby enhancing the quality of teaching.
3. Explore the teaching mode of the open laboratory
After the implementation of the new standards, the means and methods of experimentation are bound to have a substantial change, the laboratory is not only open to teachers, but also open to students. To deal with the whole school has a full interest in the experiment students. So in the completion of the work of the discipline at the same time, the laboratory also forge ahead to understand the discipline of a variety of interest group activities (such as the opening of the school-based curriculum, the opening of the research study). Laboratory teachers and staff are dedicated, enterprising work and do a good job to protect the work.
Looking back, we have done in the laboratory of fine, fine, diligent, thrifty at the same time, there are also insufficient work, which requires us to be more rigorous in the coming days, the true identity of the master to the strict self, in order to comprehensively improve the education of the Guanghua Middle School, teaching and learning to do all the laboratory staff due diligence.
Laboratory work self-assessment 2
__ year, the laboratory in the project leadership of the correct leadership and specific guidance. From the actual work of the laboratory, closely around the overall work of the project under the arrangement to carry out the work, better completion of the tasks deployed by the Ministry of the project. Seriously, timely and accurate completion of a variety of tests, testing work, better with and guide the normal progress of the project.
No matter how big or small, my site laboratory from the ideological attach great importance to, and closely cooperate with the work. Strengthen the foresight of the work, ahead of time, with practical action to return the project construction, with specific work to realize their own value. In the roadbed earthwork, roadbed subsidiary, prefabricated T-beam, bridge and tunnel and other aspects of the work process, down-to-earth to complete the task of the year. The following is my room in 20 __ years of work appraisal:
First, the spirit of polite construction
1, to strengthen my test room all practitioners of political education, professional ethics education and business level training. Strengthen the construction site guidance, testing, supervision and service work. Regularly organize the study of national policies and company documents, and conscientiously implement the relevant rules and regulations of the higher authorities. Comprehensively improve the overall quality of test personnel, establish and improve a variety of work systems.
2, the implementation of courteous office system, to stop waste, thrift, and promote thrifty office. Regular organization cleaning, adhere to the clean indoor environment, on time to participate in the project department to organize all kinds of meetings, activities and learning.
Second, the role of the function to play
1, the test room of the work duties, management system, management approach to improve the development of the test room duties, test instrument repair and maintenance system, test test report form filling and storage system, safety and health system, etc., the strict test work of the monthly, quarterly, semiannual, annual assessment and random inspection and assessment.
2, the full implementation of the daily engineering test tasks, strengthen the supervision and guidance, good service. 20 ___ years of the company's construction
heavy task, the intensity of the work of the test room is also a high demand, in the test room of the entire staff of the *** with the efforts of the test room, very well completed the test testing tasks of the project.
3, the strict implementation of the national technical standards, norms and regulations of the test, timely and conscientiously do a good job of the project's basic test data and test evaluation information. As the project laboratory in the early stages of the basic state of paralysis, basically belongs to the unmanaged, the lack of information is more, without a signed information, the quality of the project management is not in place, piling, piers and columns, to the project department caused great losses. Site two months is basically a state of stoppage. From 20__ years since the laboratory personnel changes, in a timely manner on the site problems, analyze the reasons to solve the problem, there are several kinds of problem analysis: piling, pier and column with the use of the ratio of sand and gravel, cement dosage, fly ash, additives mixing unreasonable, the slump, compatibility, fluidity, urination rate is not enough to understand, mixing station mixing concrete slump control is not strict, not in place. In the proportion design test to understand the additives and cement, fly ash, sand and gravel application relationship, not the cement dosage increase is good. This understanding is wrong, so it leads to the production of concrete to the site application, segregation, water secretion phenomenon is serious. The above problems are solved in a timely manner, and all kinds of raw materials are strictly controlled and qualified before entering the site.
Third, there are problems:
As the site laboratory in the past has always been a management chaos department, there are many problems in the management and system, which need to work in the future to find the experience, better improve and develop. Laboratory work itself is a high technical content of a job, in the future learning and life, we must strive to improve their own business level and ideological understanding, better for the project construction and the development of the company's services.
Laboratory work self-assessment 3
The test work is the performance of materials and components, process parameters and other testing activities, in order to strengthen the quality of engineering and construction of an important means, but also the implementation of the "government supervision, social supervision, enterprise self-inspection "One of the quality assurance system. 20__ years test work is in the whip gradually standardized, under the mandatory implementation of the new test standard, although so, test work has made remarkable achievements.
A project overview
This section of the East Boundary Road (Xiang'an North Road ~ Ma Xiang Bridge section) Road Project A standard starting point for the intersection of Xiang'an North Road and East Propaganda Road, the end of the sixth joint end of the Ma Xiang Bridge, the project consists of bridges, roadbeds, road surfaces for the Xiamen Municipal key projects.
Second, the progress of the project and quality profile
As of November 12, 20__, the roadbed completed 280,000 square meters, all the soft foundation treatment treatment completed, culvert completion of two culverts, rainwater works have been started construction, cofferdam construction is complete, bored piles construction is complete, the bearing platform construction is complete, the abutment construction is complete, the pier construction is complete, the construction of temporary piles is complete, the construction of the temporary support system completed, for the box girder smooth construction of the completion of the conditions.
In terms of project quality, strictly control the quality of raw materials into the field, to prevent unqualified raw materials, semi-finished products and finished products used in the construction of the project; at the same time, to strengthen the process of construction control, the quality of the hidden dangers nipped in the bud. Effectively ensure that the quality of the project pass rate of 100%, the rate of major quality accidents for 0, and strive to reach a one-time acceptance conditions.
Third, the laboratory profile
Laboratory existing test personnel 3 people, laboratory director 1 person, 2 test technicians; laboratory covers an area of 10m2. According to the municipal engineering requirements: all testing projects are commissioned to test. According to the requirements of the test and inspection regulations, test instrument operating procedures and test and inspection personnel job responsibilities on the wall, so as to ensure that the test and inspection work to follow the rules and regulations, testing personnel have a system to rely on to give full play to the laboratory in the construction of the role of the project.
Fourth, the test and inspection work carried out in the scenario
1, pre-construction is mainly on the project to be used for the verification of concrete, mortar ratio, after the trial allocation, concrete, mortar ratio to reach the strength of the preparation; test raw materials to fit the standard. Selection of roadbed filler material sources to meet the needs of engineering construction.
2, construction is mainly to strengthen process control. Strictly the quality of raw materials into the field: for new raw materials laboratory first acceptance of its warranty and appearance quality, and then according to the specification requirements for the frequency of sampling, for conventional and very test commissioned by a qualified government testing organizations; for the quality of the material is not stable material material, first of all, the strength of the parent material, the test project outsourcing test. For the roadbed as far as possible to choose A-class filler, the use of large compaction equipment, strengthen the roadbed site inspection, unqualified test shall not be carried out in the next process of construction; for the management of the concrete mixing station: test personnel according to the moisture content of sand and gravel material timely adjustment of the construction ratio; from time to time to test the measurement of the batching scales scenarios; to strengthen the pre-service training of mixing machine operators, tamping personnel and welders, and supervise the process of its operation, for the production of finished and semi-finished products quality testing. For the production of finished and semi-finished products for quality testing. The process is; into the hopper ` sand and gravel weighing, timely detection of concrete slump; for the mechanical properties of welded joints test; according to the specification requirements to stay in the concrete, mortar test blocks to detect its strength.
3, after the construction of the main quality acceptance test. Mainly detect the appearance of the finished product has no defects, the use of non-destructive means of detection to check its intrinsic quality. Specific implementation of the detection means: 2m straightedge test its flatness; ultrasonic detection of pile integrity; rebound method to detect the strength of lining concrete; and thus a comprehensive assessment, whether to reach the standard acceptance requirements.
V. Test frequency and data management scenarios
The test room set up a part-time data management personnel, mainly responsible for the original test records, test and inspection ledgers, as well as test reports to fill out, blocking and distribution. At the same time, it is responsible for the standard test of roadbed filler, testing of raw materials such as cement, reinforcing steel, sand, stone, etc., as well as the delivery of concrete test block compressive strength test.
Test and inspection work is the basic function of the laboratory, in order to ensure the quality of the project, the Ministry of the project laboratory to increase testing efforts, and successfully completed the testing task. As of November 12, 20__, in the outsourcing test: 104 groups of rebar raw material test, 26 groups of rebar joint test, 1 group of geotextile conventional test, 2 groups of gravel sieve test, 2 groups of standard compaction, 1 group of relative density of sand, compaction of 1650 points, 156 points of relative density of sand, 68 points of pile testing, 265 groups of compressive strength of concrete, 1 group of water retaining compressive strength of slate, 1 group of validation of fit ratio, 1 group of water retaining compressive strength of slate. Verification of fit ratio 6 groups.
Sixth, there are problems
1, due to the long distance, the vehicle tensions to the delivery of inspection and take the report must be difficult.
2, due to my limited ability to understand, the implementation of the integration must still have problems.
Seven, the next year's work plan
1, strengthen the test instrument repair and maintenance to ensure that the normal work of the test instrument.
2, timely delivery of test instruments and measuring instruments to ensure the accuracy of the instrument and the accuracy of the data.
3, increase the frequency of raw material testing, to eliminate unqualified products used in the project.
4, for new materials and new technologies should be promoted and applied in a timely manner.
5, constantly optimize the concrete ratio design, in order to ensure that the concrete workability, durability on the basis of the most cost-saving.
6, play the supervisory role of test and inspection work, and strengthen the construction process control.
7, mobilize the test and inspection personnel to work aggressively, give full play to its subjective initiative to improve the test and inspection work.
8, strengthen the learning of the new test standard, improve the quality of test and inspection personnel, so that the test work to a new level.
9, continue to learn and implement the "integration" approach.
Laboratory work self-assessment 4
The school laboratory is an important site for the completion of the teaching task, according to the requirements of the experimental syllabus to train students to develop a preliminary scientific experimentation skills and carry out scientific and technological activities of the place, and to carry out experimental teaching to improve the quality of teaching has a very important role. For a variety of laboratories and experimental instruments and basic supporting complete school, management is the key, because only management to follow up, in order to be more reasonable and effective use of various types of equipment. In this regard, as a secondary school laboratory personnel, we have done the following aspects of long-term work in practice:
First, strive to improve their own quality
Laboratory personnel is the basic team of scientific management laboratory, in the management and operation of the laboratory plays a decisive role. A good lab technician, can change the face of the entire laboratory, to promote the development of experimental teaching; and a poor lab technician, can lead to the entire laboratory into a dirty, messy, poor poor situation, so that experimental teaching can not be carried out normally. Therefore, each of our lab technicians, on the one hand, in the usual to strengthen political learning, improve their own quality, so that everyone in the ordinary bits and pieces of work to recognize the importance of this work, so as to love their jobs more. On the other hand, we also continue to go to brother schools and units for learning and exchange, to participate in the exhibition of experimental equipment and results. This not only makes us broaden our horizons, understand the new scene of the development of experimental equipment, but also see the advanced management experience of the brotherhood, which is conducive to our work in the future to learn from and improve. At the same time, the school also encourages us to identify our own experience, write a paper, or amateur training, in order to enhance our training in various aspects. Due to the usual strict requirements and business assessment, each of the existing science, chemistry and biology lab technicians are very good at their jobs, so that the laboratory is clean and orderly, fast and error-free experimental preparation, thus ensuring the successful completion of the teaching experiment.
Second, sound rules and regulations
As the saying goes, there are no rules, not round. Our school according to the provisions of the higher level and the specific situation of the school, the development of a more sound rules and regulations: such as the "Laboratory Management Code", "Student Experimentation Code", "Laboratory Staff Responsibilities", "Laboratory Safety Protection System", and so on, and then do so that each work are chapter to follow, there is a basis for investigation. In addition to this, we have also implemented "registration procedures for the use of dangerous goods" to ensure the safe management of dangerous goods. As a result of the concerted efforts of all the experimenters, together **** management, to ensure the smooth implementation of the system and the normal development of the laboratory work.
Third, the scientific management of instruments and equipment
The standardized management of instruments and equipment is the rational use of instruments to ensure that we have done the following work:
First of all, according to the requirements of the account, we set up a general ledger, classified ledger, low-value perishable account and the establishment of the cupboard card, indicating the number of the instrument, the name, the number. Normally, the instruments and equipment purchased or transferred are registered according to the order of the unified number, and the consumed items are timely recorded in the classification of the record book. At the end of each semester, an account, material, card verification, and the scrapping of the loss of the instrument遣'報损单', approved by the leadership of the cancellation of the account, and ultimately the verification of the number of transfers to the general ledger, the ledger, so that the towel long material card three unity.
Secondly, in the storage of instrument items to do systematic and organized. We are in accordance with the State Education Commission's new "secondary school science teaching instruments and equipment catalog" for classification and storage. Such as physical instruments are divided into measuring instruments, mechanics, thermodynamics, optics, acoustics and other categories; chemical instruments are divided into instruments, glassware, pharmaceuticals; biological instruments are divided into instruments, models, specimens and so on. Then categorized fixed cabinet, in accordance with the upper and lower light, straight and hanging principle, fixed layer positioning into the cabinet storage. Abnormal for chemical instruments in the flammable, explosive substances, we put its special storage in the stone kiln.
Third, reasonable maintenance of various types of instruments, and strive to extend the service life of the instrument. Instrument maintenance is an indispensable part of the laboratory management, should be prevention-oriented, reduce natural wear and tear to extend the service life of the instrument. My school's specific approach is: usually insist on checking all the instruments to be used before the experiment, do not let the instrument with 'sick' on duty; experiments in the process of timely discovery of problematic instruments and to be replaced or properly dealt with to ensure that the experiments are carried out smoothly; experiments after the end of the instrument will be small maintenance of all the instruments. At the same time on different types of instruments to take different methods of maintenance: such as microscopes, at the end of each semester, will focus on cleaning and wiping their lenses, and then uniformly placed in the dryer maintenance; on the electrical instruments on a regular basis, to ensure that the lines are open; for the metal instruments, tools, pay attention to rust, exceptionally rotating or sliding parts, each time after the use of wiping in a timely manner and on the oil; optical instruments to do a good job of dust, mildew work, unusual Dust, mold work, especially in the rainy season to diligently check and maintain. We also often open the instrument room doors and windows and instrument cabinet windows, ventilation, and often clean up the dust, to ensure that the instrument room is dry, clean and hygienic. As we usually strengthen the maintenance and repair of the instrument, so that the instrument is often in a state of readiness, and thus ensure the normal conduct of various types of teaching experiments.
Fourth, the effective use of equipment
Good management of the laboratory, the purpose is to be able to use all kinds of experimental equipment. In order to make teaching equipment to play a greater teaching effectiveness, first of all, at the beginning of the semester, we in accordance with the subjects of each grade of the textbook materials or "Syllabus" requirements, the preparation of the semester's demonstration experiments and student experiments of the experimental teaching plan, which includes the specific date and all kinds of supplies and requirements. Then the laboratory according to the teacher's "experimental notice" in time for teachers to do a good job of demonstration experiments and student group experiments in preparation for the work, and to assist teachers to do a good job of demonstration experiments or preview tutorials for students to carry out experiments. The students' experiments require the "four", that is, the table, the location, the person, the instrument, in order to enhance their sense of responsibility.
In order to improve the status of experiments in teaching, we sometimes also change some of the demonstration experiments into student experiments, teachers do while teaching, students learn while doing, such as the length of the measurement, force measurement and other experiments, we are in accordance with the above method. This increases the opportunity for students to use their hands and brains, and enables students to more firmly grasp the knowledge they have learned. And some simple experimental materials, such as: toothpaste, rubber bands, springs, balloons, cans, Coke bottles, etc., we encourage students to find their own, and encourage students to use a variety of different materials and methods, designed to get the same conclusion of the experiment. More hands-on opportunities for students, so that students have a clearer impression of the establishment of concepts, while at the same time develop the experimental skills of students and increase their interest in learning.
Over the years, our school in the management and use of laboratory equipment has made some experience and achievements. Last year successfully passed the Suzhou City, secondary school laboratory "qualified laboratory" acceptance, this year was also named "advanced group" honorary title. But we are not satisfied with the status quo, because we see that there are still a lot of problems, especially in the new situation, how to gradually modernize the means of experimentation, we still need to continue to explore, and constantly identify, so that the level of management of the laboratory to be further improved.
Laboratory work self-assessment 5
20__ years, our laboratory in the company's correct leadership and specific guidance, as the company to undertake the development of technology and quality control of the functional departments, all of our experimental staff to adhere to the spirit of self-teamwork, in the spirit of the quality of the product of the company is responsible for the company's interests, for the company's interests. Diligently and conscientiously, we have accomplished the quality control and inspection tasks assigned by the company. Laboratory from the ideology attaches great importance to the work, the duties of the person post clear, work enterprising high, and other relevant departments with good cooperation, the successful completion of the test and inspection tasks, the following on the work of the laboratory in the year 20__ to identify:
First, technical communication and job training:
1, the special or important projects, we consciously strengthen the construction site technical guidance, supervision and monitoring and inspection. Site technical guidance, inspection and supervision, service, good product quality, and strive to customer satisfaction, responsible for the customer, so that the pouring of each concrete project does not leave a little quality hazards, so that customers can rest assured. Conscientiously implement the spirit of the relevant instructions of the higher authorities, and comprehensively improve the overall quality awareness of personnel.
2, in order to improve the personnel's business skills, enterprising organizations to participate in personnel training, on the one hand, to obtain a certificate of qualification, on the other hand, so that personnel have a comprehensive grasp of the inspection skills.
Second, the role of the function to play:
1, the laboratory of the duties, management system, management approach to further improve the test room, a clear test room personnel's job responsibilities, improve the use of test instruments and maintenance and repair records, standardize the test and inspection reports to fill out the system of storage and so on.
2, the full implementation of the daily material testing tasks, for qualified concrete products to do a good job of technical services. 20 ___ years of the company's production tasks, the intensity of the work of the test room is also a high demand in the test room of all personnel *** with the efforts of the test room, very well completed the various test tasks. Up to now, gravel aggregate, cement, additives, fly ash test *** more than 300 batches, concrete compressive strength test pieces 3245 groups, concrete compressive strength test pass rate of 100%, all kinds of concrete test mix *** 387 groups, issued various types of test reports *** more than 13,000 copies of the various construction projects within a year without major quality accidents. Successfully completed the optimization of concrete ratio, reducing the amount of cement, cost savings, and increased efficiency. According to the needs of customers, successfully formulated a variety of special concrete products, such as equal-strength mortar, high-strength fine stone concrete, etc., in the industry to make up for the many shortcomings. In this year, the laboratory cement and concrete compressive strength seriously do the month summary statistics, according to its standard deviation to determine the level of quality control, the data do not dream of analyzing the reasons for improvement.
As the company's laboratory work itself belongs to the higher technical content of a job, as a production service, product services, technical departments, we must be good quality products to adapt to the market's choice, in the future work, we have to work hard to improve their own business level and style of thinking, with a higher work ethic and upward team spirit, better for the development of the company's services.
The company is a leader in the field of business development.
Laboratory Work Content Self-Assessment Five Related Articles :
★ Laboratory Work Self-Assessment Five 1100 Words
★ Internship Self-Assessment Complete Five
★ Work Personal Self-Assessment Example Compilation of five
★ Work Personal Self-Assessment Example Five Summaries
★ Work Personal Self-Assessment Example Summary
★ Work self-assessment summary five
★ Internship work self-assessment selected five
★ Internship work personal self-assessment selected five
★ Work personal self-assessment five references
★ Work personal self-assessment templates collection five
★ Internship self-assessment compilation of five model