The following statements are true about drying and thermostatic chambers: drying chambers are used for drying and dry-heat sterilization of articles, and thermostatic chambers are used for the cultivation of microorganisms and biological materials.
Before using a desiccator and a thermostat, special attention needs to be paid to the environmental settings. Both need to be placed in a ventilated, dry environment, and placed in a position not subject to direct sunlight, but also to avoid close to the heat source or other equipment. At the same time, you need to ensure that the operation area is clean and tidy, to ensure safe operation.
When using the drying oven and thermostat, you need to select the appropriate temperature and time according to the material and size of the item being tested. Especially when using the constant temperature box, the temperature should not be too high or too low, so as not to affect the test results or damage to the equipment.
Difference between the drying oven and thermostat
1, the role of different
The drying oven is mainly used for the removal of water from samples with high moisture content, commonly used in the preparation of dried samples or storage of specimens at a stable temperature. While the thermostat is to maintain a constant temperature under the static, culture, breeding, fermentation and other samples that require a specific temperature environment.
2, the use of different occasions
The drying oven is usually used in the laboratory in the preparation of samples and testing room, used to remove moisture. While the thermostat is used in biological laboratories and microbiological laboratories, used to control the growth environment of cells and strains of bacteria.
3, the use of different
The drying box is usually placed in the drying box for drying samples, in the process of using the samples need to pay attention to the heat sensitivity and drying speed and other issues. The thermostat box needs to be controlled by the sample in the box, set the temperature and time and other parameters to achieve the control of the sample.