Industrial connector is a new type of connector, specially designed for establishing powerful Ethernet connection in harsh environment. It is tougher, stronger and more durable than previous connectors. This new interface is generally considered as an "industrial connector", and its application is not limited to manufacturing. This kind of connector is designed to withstand the test of the worst industrial environment.
Knowledge expansion
What is a connector?
The so-called connector means that two or more containers communicate with each other below the liquid level. Joints with the same liquid and the same liquid level pressure have the same liquid level height.
(1) The connector is filled with the same liquid, but the pressure on the liquid level is different, so the pressure difference of the liquid level is equal to the pressure difference caused by the liquid level difference between the two containers of the communicator.
(2) The pressure on the liquid surface of the joint is equal, but the liquids on both sides are different, and the height of the two liquid surfaces from the interface is inversely proportional to the liquid density. The principle of connector is widely used in engineering. Such as various liquid level gauges (water level gauges, oil level gauges, etc.). ), mercury vacuum gauge, liquid column wind pressure gauge, differential pressure gauge, etc. All use the principle of communication. By understanding the definition and working principle of connectors, we can better understand and develop the connector market.
What is the industrial connector for?
1. Industrial connectors are indispensable micro-coupling plugs and sockets. The pins of industrial connectors can directly connect the power and signals between printed circuit boards (PCB). Copper alloy is usually used in industrial connectors. After years of anti-oxidation treatment, the conductivity is prevented from decreasing.
2. In electronic manufacturing, the whole equipment may need suitable available space. If the PCB in the circuit board design stage often takes up too much space, the device may be divided into two or more boards. Industrial connectors can connect power and signals between circuit boards to complete all connections.