1. Where can I find the decoration design drawings?
1, floor plan, reasonable planning floor plan, in the eyes of many people, is the most test of the designer's design level. Indeed, the furniture layout of the floor plan is a top view, and it is the essence of the floor plan to reasonably divide the functions of each area and consider humanization. Of course, whether the size of the furniture in the drawing is accurate and whether the shadow will affect walking should be considered. And some inexperienced designers often don't consider these.
2. The original plan is the first drawing after measuring the house, and it is the basis for drawing design drawings. Mainly indicate the size, height, original pipeline and doorway of the room type. The first thing that goes wrong is usually the original picture. If the size is not correct, the labor cost, material cost, management fee and design fee should be added. If you are worried about something fishy, you can roughly measure it with a tape measure when you get the drawings. Generally, the size will not differ much.
3. For the floor material map, it is generally necessary to indicate the type of materials used on the floor, whether it is ceramic tile or floor, paving direction, pattern and boundary description of different materials. A good designer can generally count the number of floor tiles used in the floor material drawing, so that the budget can not be made, and the floor demand can be calculated on the drawing. Of course, these are rough estimates, and the actual consumption should consider the loss, but it can be used as a reference to see if the designer's calculation is correct.
Second, the commonly used drawings for decoration
1, building renovation scheme. According to the design scheme, the wall to be renovated is marked on the drawing (or on the original building survey drawing). The common representation is that the wall that needs to be demolished can be represented by dotted lines on the map, and the dark color represents the reconstructed wall.
2, water supply plan, kitchen, bathroom and other places of water supply and drainage pipeline layout, water supply pipe diameter size, water intake position and height, pipeline layout system, etc.
3, lighting plan, lighting lamps, electrical appliances, meter box in each part of the room location, electricity consumption, configuration of wire cross-sectional area and its calculation, loop system and wire direction, can also be directly marked in the ceiling layout.
4. Air-conditioning circuit diagram, indicating the installation location, socket location, use model and the location of the total power box in each room. It is particularly important to note that the cabinet machine and the wall hanging machine have different requirements for voltage, which need to be specially marked on the drawings.
5. Elevation view, which shows the local section view of the room from a horizontal angle, including the positioning size of the wall surface, the elevation view, size, structural materials and face material names of each part of the decorative wall surface; The vertical figure, size, construction material and surface material of furniture modeling are fixed in every room and every part; Section and size of each fixed furniture; The details, details, materials, dimensions and joint construction methods of fixed furniture; Cylindrical decorative modeling of wall, flower frame size, railing, steps, line angle and other dimensions. In the elevation drawing, the elevation and height of doors and windows should be indicated respectively, and the ceiling section of the corresponding part should be drawn together, and the size and elevation of the ceiling modeling part should be marked.
The above article is the relevant content introduced to you in this issue of Bian Xiao, so that's it. I believe this information can help you.