As individuals continue to improve, more and more people will go on to use reports, which have certain skills in writing. Writing a report is clueless? The following is a sample of the safety production accident investigation report that I have organized for you, welcome to read and collect.
Safety Production Accident Investigation Report Sample 1XXX:
At X:00X:00 on X day of X month, XX unit located in XX city XX road XX XX occurred a lifting injury accident, resulting in the death of X people, the direct economic loss of XX million yuan.
After the accident, according to the "Regulations on the Reporting and Investigation of Production Safety Accidents" (State Council Decree No. 493), the XX Municipal Government agreed to set up an accident investigation team consisting of the XX Municipal Safety Supervision Bureau, Supervisory Bureau, Public Security Bureau, Federation of Trade Unions and XX departments to investigate the accident. The accident investigation team through on-site investigation, expert appraisal and multi-party evidence, to find out the accident occurred after, cause and nature.
First, the basic situation of the accident
This part of the accident investigation is the factual basis for the management of the responsibility of the determination, including the following aspects:
1. Accident occurred in the basic situation of the unit and the relevant responsible units;
2. Units and the relevant qualifications of personnel;
3. Accident point before the occurrence of unsafe conditions;
4. Unit safety management;
5. The location of the government and the relevant departments with responsibility for safety supervision.
Second, the accident and rescue
1. Accident
Objectively describe the accident, rescue until the last victim (or injured) until the whole process.
Focus on describing the evolution of the accident in the process of accident triggering, development, expansion of the state; places, facilities, equipment, devices, changes in the state; people's violations of rules and regulations.
2. Emergency rescue
Briefly introduce the accident emergency rescue situation, if necessary, can also briefly introduce the aftermath of the situation.
Third, the accident caused casualties and direct economic losses
1. casualties 2. direct economic losses
Fourth, the causes of the accident and the nature of the accident
1. Direct causes
mainly from the scene investigation and accident after the generalization of the unsafe state of things and human unsafe behavior.
(2) indirect causes
mainly from the first part of the report, "the basic situation" summarized in the accident unit safety management and departmental supervision deficiencies.
2. The nature of the accident
Mainly to determine whether the accident is responsible for the accident or non-responsible.
V. Suggestions on how to deal with the responsible persons and units
1. Suggestions on how to deal with the responsible persons referred to the judiciary;
2. Suggestions on how to deal with the responsible persons subjected to party disciplinary and administrative sanctions;
3. Suggestions on how to deal with the responsible units and responsible persons subjected to administrative sanctions;
4. Recommended to deal with the responsible personnel in accordance with the internal rules and regulations of the enterprise.
Responsible personnel responsibility is recognized in accordance with the following pattern: name, political profile, current position, management of the business, the time of service, the facts of violations (separated by multiple semicolons), what responsibility, according to the provisions of the provisions (articles), what is recommended to be given sanctions (penalties).
The responsibility of the responsible unit is expressed in the following pattern: the unit, the facts of the violation, the violation of what provisions (articles), recommended administrative sanctions.
Six, corrective and preventive measures proposed
To address the causes of accidents, proposed targeted, practical measures to prevent the occurrence of similar accidents. Preventive measures should be proposed from management, equipment and personnel training.
VII. Annex
1. The formation of the investigation team
Including two contents:
(1) the investigation team to form a document;
(2) the investigation team list of personnel (form), the form is called "× × Accident Investigation Team List of Personnel ", including the names of personnel, work units, positions, positions within the investigation team, signature.
2. Schematic diagram of the accident scene
Graphics with A4 paper drawn to scale (CAD drawing is recommended), the specific proportion according to the actual situation. The diagram should reflect the accident scene equipment, facilities, devices, the arrangement of the accident site name, location (indicating the distance from the size), the location of casualties and fall to the relevant equipment, facilities before and after the accident location. At the same time to indicate the title of the map, pointing to the standard, scale, legend and fall and other elements.
3. Accident direct economic loss details
4. Accident casualties
It is recommended to list the accident casualties in the form of a table called "XX Accident Casualty List". The content includes the casualty's name, place of origin, age, type of work, training and degree of injury.
XXX
XXX XX, 20xx
Sample Safety Accident Investigation Report 2XXX:
As a building construction enterprise, the diverse electrical and mechanical facilities, multi-task cross operation, high-altitude operation and complex site conditions form the industry characteristics of the construction industry that have a high rate of hidden safety hazards and safety accidents. Although the national authorities at all levels have made clear and detailed regulations on the safety management of the industry, and the enterprises have formulated various rules and regulations and safety responsibility system, but the hidden safety problems and safety accidents are still unceasing. The company's safety management department after this year's safety management of the project under construction investigation and research, that the comprehensive quality of practitioners is the building construction industry to improve the safety management of the foundation.
A high degree of responsibility and dedication, is the basic requirements of the building construction industry practitioners. Every job, it is necessary for people to complete, with the increasing degree of mechanization, the use of a variety of advanced machinery and equipment, so that the intensity of people's labor is gradually reduced, but the requirements of the practitioners of the sense of responsibility is more and more high, especially in the building construction industry, the managers and operators at all levels of division of labor is clear, and each has its own responsibility, if a person's sense of responsibility is not strong, may lead to a series of serious consequences, and even cause a big disaster. Therefore, a high degree of responsibility is the basic requirement for employees in the building construction industry.
Good personal quality is a must for safety. The building construction industry is characterized by variable construction sites, strong mobility of personnel, and complex operating conditions. Each time a project is awarded a bid, it is necessary to form a project department and select project management personnel and construction teams according to the specific characteristics of the project. The survey found that most of the managers of the Company's projects under construction have gone through professional training and exercise on the construction site, have certain management experience and corresponding qualifications, are familiar with the procedures of construction work and a variety of norms and safety measures, and are the backbone of the project safety management; however, the quality of the personnel of the construction team chosen is uneven, and a considerable portion of the personnel are rural youths, with a low level of education and safety awareness. However, the quality of the personnel of the selected construction team is uneven, and a considerable part of the personnel are rural youths with low cultural level and safety awareness, who are not professionally trained and lack the necessary knowledge of production safety and safety prevention skills. How to improve the comprehensive quality of this part of the personnel, is to ensure that the project is the key to safe production.
Do a good job of construction coordination, is an important part of production safety. Construction industry, the various types of work both a clear division of labor, but also must cooperate with each other, so as to ensure the effective implementation of various safety measures, the formation of a good situation of safe production. Each type of work, each process must maintain a good relationship of cooperation between each other to create a safe and stable production environment, to do no harm to others at the same time, but also to get the return not to be harmed by others, which makes the various safety measures can be effective, thorough implementation of a variety of safety measures can be durable and effective to play a due role in the protection.
Actively involved in the rectification of hidden safety hazards is an important method of gradually improving safety management. In building construction, due to multiple types of cooperation, cross operation, it is inevitable to produce some hidden safety hazards, such as not dealt with in a timely manner, it may lead to accidents. However, it is undoubtedly unrealistic and impossible for only a few safety management personnel to discover and properly deal with these hidden safety hazards that may appear anytime and anywhere. If every practitioner can promptly identify potential safety hazards and immediately take positive and effective measures, such as notifying the safety officer, to take corrective measures, etc., will be able to nip the potential safety hazards in the bud, reduce or even eliminate all types of safety accidents.
Therefore, the comprehensive quality of practitioners is the basis of safety management in the building construction industry. How to improve the comprehensive quality of practitioners? After a few projects this year, the investigation of safety management work is summarized in the following aspects: First, we must clarify the responsibilities and reward and punishment system, understand the stakes, and improve the sense of responsibility of practitioners; Second, we must conscientiously implement the three-tier safety education system and the pre-shift meeting system, in particular, the practitioners of special training on safety, to improve the comprehensive quality of the practitioners and the identification of safety hazards to ensure that the safety hazards Timely detection and timely rectification; Third, we should do a good job of coordination, give full play to the coordinating role of management personnel at all levels, develop safe and effective construction programs, implement a variety of protective measures, to remind each other of the safety and protective equipment, check each other, and maintain a variety of safety facilities and safety signs, to create a good environment for safe production.
XXX
XXX XX, 20xx
Safety Production Accident Investigation Report Sample 3XXX:
I. Overview of the accident unit:
Mianyang City Kaiyuan Construction Company Limited, the type of company is a limited liability company, belonging to the general contracting of housing construction Second-class enterprises. The company's legal representative Wang Jun, engineering head Pu Yuan high; project manager Yao Quanbo; technical head Hu Zhen (Senior Engineer); construction worker Zuo Chunmei, Xu Jun; quality inspector Mao Shunrong, Deng Yun; safety officer Wang Ming, Liu Logistics; materials Jiang Hua; costing officer Liu Haiying.
Second, the main unit of the project overview:
(a) Construction unit: Sichuan Guangwang Energy Development (Group) Co.
(b) Supervision unit: Sichuan Yuanfeng Construction Project Management Company Limited, Project Director Zheng Yunchun.
(c) Construction unit: Mianyang City Kaiyuan Construction Co., Ltd, Project Manager Pu Yuangao, Project Manager Yao Quanbo.
Third, the accident fatal identity profile:
Luo Zhongying, female, Han nationality, born on January 15, 1935, origin: Baoxing Road 99, Bao Lun Town, Lizhou District, work unit: Bao Lun coal mine.
Fourth, the accident occurred and the accident rescue situation:
(a) The accident occurred: Monday, March 24, 20xx, around 10:04 am.
(ii) Accident location: Guangwang mining area coal mine shantytown renovation project Bao Lun coal mine leaping into the community 7 # building pit adjacent to the original carriageway roadside.
(3) description of the process of the accident: due to the 7 # building pit near
the original carriageway roadside, in the foundation excavation pile of discarded earth blocking the original road traffic, on March 24, 20xx the morning of Mianyang City, Kaiyuan Construction Company Limited sent by the He Xianjun (mechanical driver) driving a 50-type loader digging, 10:04 in the morning during the construction operation, due to the loader bucket did not land! Blocking the line of sight ahead, in front of the car when the car was traveling after rubbing and hanging on the spot crushed to death is machinery in front of the local residents pouring garbage LuoZhongYing (vehicle crushed to feet, hands, chest and abdomen injuries). Construction unit on duty full-time safety officer Wang Ming at the scene of the accident.
(D) accident handling process: after the accident, the construction unit, construction unit, supervision unit seriously and actively appease the deceased aftermath, by protecting the scene, alarm, reported to the competent administrative department of construction (Lizhou District Construction Bureau) and inform the families of the deceased and other procedures. The general situation is as follows:
1, BaoLun police station on the spot to understand the record case, the driver will be brought to the police station to accept the continuation of the investigation.
2, the construction unit sent a special person (Pu Wei) to guard the scene of the accident and according to local folk customs of the deceased to carry out the necessary procedures (such as: covering the body, firecrackers, burning paper, etc.).
3, supervisory units, construction units proactively cooperate with the competent authorities to investigate, and blame its construction units to correct their attitudes and actively ensure that the deceased after the incident.
4, get reported to the phone, the Construction Bureau quality and safety station, Lizhou District Security Office, the city construction brigade, cremation plant, local government and other successive visits to guide the follow-up work of the accident.
Organizer: Sichuan Yuanfeng Construction Project Management Co.
March 24, 20xx
Safety Production Accident Investigation Report Sample 4First, the accident
June 8, 20×× about 2:30 pm, in the second plant cone breakers overhaul, there was a safety accident. Maintenance worker Wang Hailin left hand in addition to the thumb of the four fingers were seriously injured, the accident is as follows: 13:30 work, processing Φ21mm round steel made of S-type lifting hook, after water cooling, lifting part of the cone breakers blocking hopper ring, the weight of this part is about 1. 5T, which has only two Φ30mm holes can be used as a lifting point, the periphery of the gap of only 5mm. The wire rope could not be inserted into it, so a hook could only be used as a lifting tool. The staff at the site were: Wang See (on-site commander), Ma Zhenhai, Wang Hailin (on-site operation and maintenance workers), Yuan Wencang, Meng Zhaoqing (on-site maintenance auxiliary staff). At 14:15 pm, Wang Jian, Ma Zhenhai and Wang Hailin went up to the upper part of the cone breaker, made all the preparations for lifting and started lifting. Wang saw pulled the hand hoist, Ma Zhenhai and Wang Hailin stabilized the object. As the object slowly rises, due to the wear and tear of the retaining hopper ring, the object is not balanced during the lifting process, and the phenomenon of one side being high and the other side being low occurs. When the lifting height reaches 0.6m, the high end of the retaining hopper ring has exceeded the short end of the head by about 150mm, and then Wang Hailin (standing on the right hand side of Wang See) observes the distance between the object and the short end of the head at the high end, and sees whether he can insert the prepared board to stabilize the object, and the object is stabilized due to the lack of balance. Because the object is not balanced, it is not easy to determine the gap of inserting the board. When Wang Hailin pressed the top end down, the object shook too much due to the sudden force, the hook was deformed, and the hopper ring slipped off. Wang Hailin's left hand in addition to the thumb of the four fingers squeezed off, after the accident, Wang see immediately to the company leader called to report the situation, the company immediately sent a car to send Wang Hailin to Pingquan County, West Dam Orthopaedic Hospital, due to the seriousness of the injuries, orthopaedic hospitals recommended to transfer to 266 hospital in Chengde, and contact 266 hospital Xiu Dean to prepare for the operation, the patient arrived to do the examination and proper treatment, the hospital recommended that the transfer of the Beijing Jishuitan Hospital, the patient arrived to do the examination and proper treatment. Immediately sent Wang Hailin rushed to Beijing, Li Huayun, general manager of Jishuitan Hospital waiting, the patient arrived because the hospital will be scheduled for surgery in the middle of the night, Li Huayun, general manager of the Air Force General Hospital in time to contact the operation, to June 9, 8:00 am surgery completed.
Second, safety production accident analysis:
20xx June 8, 2:30 pm, in the second election plant overhaul cone when a safety accident, according to the party auxiliary workshop director Wang saw the accident, the accident injured Wang Hailin with Ma Zhenhai to help Wang see in the lifting cone 1. 5 tons of heavy gear hopper ring when Hook deformation gear hopper ring fell off, will Wang Hailin four fingers cut. After the accident, Wang saw immediately reported to call the car, the injured in a timely manner to the hospital for treatment.
After the accident, Zhao Xibo, Shang Ye, Yu Yong, Hao Yikun to the scene to understand the situation. Restore the scene situation with the same Wang see wrote through, Wang see stood near the door position, Ma Zhenhai in its left hand side, Wang Hailin in its right hand side position, gear hopper circle lifting, not horizontal lifting, Ma Zhenhai end of the low, Wang Hailin end of this has been more than the short head edge of the 150 millimeters, Wang Hailin thumbs on the top of the four fingers in the bottom of the hands down, due to the stalls hopper circle circle and the short head of the inner circle is only a 5 millimeter gap, so small gap, this imbalance, and the short head of the short head of the inner circle is only 5 millimeters. Such a small gap, this unbalanced state of the hook deformation gear hopper ring fall off and short head edge contact to form a shear, gear hopper ring fall off Wang Hailin's left hand fingers were cut, the result of this safety accident.
The accident is analyzed as follows:
1, the scene commanders in the pull hand hoist, did not play a command role and observation and coordination role.
2, on the blocking hopper ring wear and tear situation is not allowed to judge, did not fully take into account the lifting process of the problem of bias, resulting in the lifting of the components after the skew serious, in order to insert the wooden boards and the lifting of the object for the pressure shaking leveling caused by the accident.
3, due to the lifting parts of the pressure shaking, instantaneous generation of huge force to make the production of the hook deformation and slipping.
4, overhaul before the lack of detailed program demonstration.
5, Wang Hailin for the newly recruited workers, the large equipment overhaul experience is insufficient, although participated in the safety training organized by the County Safety Supervision Bureau, but the site training is insufficient.
6, the security department did not monitor and guide the whole process of overhaul.
7, in this accident in the production of deputy general manager Zhao Xibo, production manager Shang Ye, technical manager Yu Yong, electromechanical maintenance workshop director Wang see have unshirkable responsibility.
Third, the lessons
The lessons of this accident is painful, through the detailed analysis and study of this accident, to learn from the following lessons:
1, regardless of the size of the project, there should be a detailed organization and implementation of the program and safety protection measures.
2, in the safety of the three education process, we must do a good job of the quality of safety and safety skills of workers ` training.
3, on-site command and safety supervision should not be a formality, but really play a role.
4, the construction process of the tools used in the tools, appliances must choose the regular manufacturers of qualified products, homemade tools, appliances to be tested before use.
5, any project can not because of cost savings and simplify the maintenance facilities and safety facilities.
6, the construction process, mutual reminder and mutual protection is seriously inadequate.
Fourth, corrective measures
1, for the recruitment and hiring of special operators must be issued by the labor department to hold a valid on-the-job qualifications, undocumented personnel will not be hired or certified by the training before hiring. Recruitment of personnel must be qualified by the county epidemic prevention station physical examination before hiring. Recruited personnel must go through the three-level safety education training (factory, mine, workshop, team) for 48 hours. After training and passing the examination and skill test, they are allowed to work. Existing personnel monthly safety training is not less than 8 hours.
2, each construction operation must be developed before the detailed work plan, safety measures, protective measures, the formation of written materials reported to the leadership for approval, to reach everyone involved in the construction of the people, all strictly enforced. Every class work must be carried out before and after the class meeting, required to participate in the construction of all personnel to participate.
3, before the construction of the construction site, the site, environment, facilities, routes, space to do a full investigation of the potential for accidents predicted, the development of relevant plans and avoidance methods.
4, the construction of tools, appliances need to be used after a safety inspection, qualified before use, materials, supplies, tools in accordance with the provisions of the arrangement, the construction site shall not be placed in the construction of unrelated debris, to prevent emergency situations impede the evacuation of personnel. The procurement of lifting tools must have safety inspection mark, certificate of conformity.
5, the construction process commanders must observe each operator, it is strictly prohibited to commanders to personally operate and ignore the command work, it is strictly prohibited to command more than one person and illegal command.
6, before the construction of safety management personnel need to construction measures, programs, tools, appliances for inspection and confirmation. During the construction process, the safety management personnel of the entire construction process for the whole monitoring, supervision and inspection.
7, a comprehensive investigation of the company's various construction sites existing lifting tools, safety facilities, power lines, power supply devices, pipelines, roads, protective railings and other safety hazards, the development of rectification measures, and deadline for completion.
8, the construction site should be prepared to first aid medicine box, the mine is always on duty 24 hours a vehicle in good condition, in order to emergency use.
9, and medical units, rescue units to establish a linkage mechanism.
Safety Production Accident Investigation Report Sample 5
XXX:
I. Overview of the Accident Unit
Detailed Name of the Enterprise: ABC Company Limited
Address: XX City, XX District, XX Road, No. X
Economy Type: XXXX Industry Classification: Refer to GB / T4754-20xx
Affiliation: Direct authority:
Organization code: XXXXXXXXXX-X Legal representative: XXX
Total number of employees: XXX people Enterprise scale: XX
Contact person: XXX Tel: XXXXXXXXXX
II. Accident Overview
Location of the accident: XX production line XX machinery in XXX plant of ABC Company Limited
Time of the accident: XX time XX minutes on XX day of XXX, XXX
Type of the accident: XXXX
Severity level of the accident: general accident
Total number of working days lost in the accident: XXX days
Cause of accident: XXXXXXXXXXXX
Third, casualties: fatalities, serious injuries X, minor injuries
Name Gender Age Education
Degree Employment
Form of work Level of work This work type
Length of service Safety education
Status of work
The accident was not a serious accident.
(1) direct economic loss (10,000 yuan): XX million yuan
① casualty expenses: including medical costs (including nursing costs), funeral and compassionate costs, subsidies and relief costs, wages, etc.;
② post-processing costs: including dealing with the accident business costs, on-site salvage costs, clean-up costs, accident fines and compensation costs;
The accident is a very important part of the accident.
③ the value of lost property: including the value of lost fixed assets and current assets.
(2) Indirect economic loss (million yuan): XX million yuan
① The value of production stoppage and loss of production:
② The value of loss of work:
③ The value of loss of the source:
④ The cost of combating environmental pollution:
⑤ The cost of supplementing the training of new employees:
⑥ The cost of other losses:
V. p> V. Detailed accidentThe accident investigation team must find out how the accident occurred, the accident should include the following:
(1) before the accident occurred, the accident occurred in the unit of production and operation conditions;
(2) the accident occurred at the specific time, location;
(3) the accident scene (3) the accident scene conditions and accident scene protection;
(4) the accident occurred after the emergency response measures taken.
XXX
XXX, XXX, 20xx
Safety Production Accident Investigation Report 6XXX:
I. Overview of the Accident Unit
Second, the accident and the accident rescue
Third, the accident caused casualties and direct economic losses
Fourth, the cause of the accident and the nature of the accident
(a) the cause of the accident
1, the direct causes
(1) the person's unsafe acts: according to the GB5442-86A7 regulations.
(2) unsafe state of machinery, material or environment: according to GB5441-86A6.
2, indirect causes
(1), technical and design defects.
(2), insufficient education and training, lack of technical knowledge of safety.
(3), unreasonable labor organization.
(4), the lack of inspection and guidance for on-site work.
(5), there is no safe operating procedures or unsound.
(6), poor rectification of hidden dangers of accidents, failure to implement accident prevention measures.
(b) the nature of the accident
1, whether the accident is responsible
2, whether the accident is non-responsible
V. Responsibility for the accident and the treatment of the person responsible for the accident
1, the responsibility of the unit of the accident and the treatment of the views (full responsibility, the main responsibility, the responsibility, secondary responsibility, etc.), the responsibility of the unit of the accident and the treatment of the views (full responsibility, the main responsibility, the responsibility, secondary responsibility, etc.), the responsibility of the unit of the accident and the treatment of the accident. Responsibility, secondary responsibility, etc.), in accordance with the provisions of the Regulations to propose administrative penalties.
2, the responsibility of the relevant departments of the accident (main responsibility, important responsibility, secondary responsibility, some responsibility, etc.), according to the provisions of the Ordinance to propose administrative penalties.
3, on the responsibility of the responsible person's responsibility (the main leadership responsibility, leadership responsibility, management responsibility, direct responsibility, important responsibility, etc.), put forward individual administrative punishment recommendations and party, political and disciplinary recommendations to pursue the criminal responsibility of the responsible person.
Six, future prevention and corrective measures proposed
Attachment:
1, accident investigators signed the list.
2. List of casualties.
3, copies of relevant information.
Including:
(1) a copy of the information provided by the enterprise (2) photos of the scene (3) the scene schematic (4) a copy of the transcript (5) the legal instrument of the administrative penalty (6) the legal instrument of the criminal penalty (7) a copy of the fine receipts (8) a copy of the administrative sanctions (9) a copy of the party disciplinary (10) other relevant materials to be submitted.
XXX
XXX, XX, 20xx