1, will be on the stretcher fixed tray tail end of the left side of the black handle to the right side of about 25 degrees (at this time the fixed tray and the base of the car between the card locks released), and then fixed tray to the rear of the lower (about 25 degrees or so) dragged out until it can not be dragged out.
2, one hand to fix the stretcher, one hand will be fixed pallet tail end of the right side of the black handle to the left side of the rotation of about 25 degrees (at this time on the stretcher and fixed pallet between the card locks loosened), then will be on the stretcher slowly dragged out of the stretcher on the stretcher successive bracket straightening, the rear of the front bracket straightening.
3, through the above steps, complete the stretcher from the car to the ground process.
4.Align the front end of the on-board stretcher with the groove of the fixed pallet.
5, will be on the stretcher tail end of the left side of the handle up flat, then on the stretcher front bracket closed, the operator will be stretcher along the fixed pallet groove continue to push forward until can not be pushed.
6. After that, lift the handle on the right side of the tail end of the stretcher upward and flatten it, at this time, the rear bracket of the stretcher will be closed, and the operator will continue to push the stretcher forward.
7, until the stretcher on the car pushed to the fixed pallet with the card lock card firmly, and then will be fixed pallet lift flat forward to the car with the base of the fixed, at this time to complete the stretcher on the process.