Ⅰ I want to apply for the aerial license, where to do how to do what materials are needed
The aerial license is commonly known as the aerial operation license.
First of all, candidates must meet the following registration requirements:
1, at least 18 years of age and not more than the national legal retirement age
2, junior high school or above
3, through the second level of the second level of the medical institutions of the physical examination
4, with the necessary technical knowledge and skills of safety
The application requirements are not high and basically most people can fulfill them. However, hospitals do not specifically check for fear of heights. If there is a fear of heights, it is not conducive to work at heights. Therefore, it is recommended that candidates go to high places to test whether they are afraid of heights.
Secondly, candidates need to prepare the following supporting documents:
1, front or back of ID card or scanned electronic file
2, copy of junior high school or above or electronic file
3, electronic file of a one-inch standard blue (or red) bottom photo without a hat
4, their own signed health commitment
The Aerial Work Certificate test is divided into two parts: theory and practical. The theory test is a computer based test with a passing score of 80 and a duration of 2 hours including an opportunity for a supplementary test. The practical is worth a total of 100 points with a pass mark of 80. It assesses the use of seatbelts and simulates the rescue of a drowning person.
(1) for the conditions of work at height license extended reading:
work at height situation
1, ascent to set up the work
2, refers to the high places engaged in scaffolding, spanning the frame erection or demolition of the work.
3, installation, maintenance and removal operations at height.
4, refers to the installation, maintenance, demolition operations at a high place.
5, refers to specialized or often in the fall height of the base plane 2 meters and above the potential fall of the high place of work.
6, applies to the use of specialized equipment for internal and external decoration of buildings, cleaning, renovation, electricity, telecommunications and other line erection, high pipeline erection, small air conditioning installation at high places, maintenance, a variety of equipment and facilities and outdoor advertising facilities, installation, overhaul, maintenance, as well as engaged in the demolition of buildings, equipment and facilities at high places.
鈪 how many meters high altitude work need to apply for the aerial work permit
2 meters and above to carry out operations are required to apply for the aerial work permit.
Special operators must be specialized safety technology training and assessment of qualified, to obtain the "Chinese People's **** and the country special operations license" (hereinafter referred to as the special operations license), before they can work on the job.
The work at height belongs to special operations, so you must be licensed to work.
In order to facilitate the operation of the process to do a good job of prevention, effectively preventing people and things from falling from a height accident, according to the characteristics of the construction industry, in the construction of building installation projects, the structure of buildings and structures within the scope of the various forms of holes and the nature of the work of the edge, hanging and climbing operations, operating platforms and three-dimensional intersection of operations.
As well as in the structure of the main body of the site and the channel next to the various types of holes, pits, ditches, grooves and other engineering construction work, as long as the above conditions are met, are treated as work at height, and to protect.
(2) for the conditions of work at height license extended reading:
work at height situation
1, ascent to set up the work
2, refers to the high places engaged in scaffolding, spanning the frame erection or demolition of the work.
3, installation, maintenance and removal operations at height.
4, refers to the installation, maintenance, demolition operations at a high place.
5, refers to specialized or often in the fall height of the base plane 2 meters and above the potential fall of the high place of work.
6, applicable to the use of specialized equipment for internal and external building decoration, cleaning, renovation, electricity, telecommunications and other line erection, high pipeline erection, small air conditioning installation, maintenance at high places, a variety of equipment and facilities and outdoor advertising facilities installation, overhaul, maintenance and in high places to engage in buildings, equipment and facilities demolition operations.
Ⅲ aerial work permit conditions
Aerial work permit is in the Safety Production Supervision Bureau exam for the National Safety Production Supervision Administration unified version of a production, the provincial safety production supervision and management department, the special work permit in the country in general. Special operation license shall not be forged, altered, lent or transferred. If you have no technical problems, I can help you directly for! Add me, I hope I can help you!
Ⅳ apply for the aerial work permit to what conditions
Aerial work permit is engaged in the ascent of elevated erection operations or high installation, maintenance, demolition operations work of the personnel must be examined by the special operations operating license. The license is issued by the Safety Supervision Bureau.
Ⅳ Working at height need to have what conditions
1, in order to facilitate the operation process to do a good job of preventing, effectively preventing people and things from falling from height accidents, according to the characteristics of the construction industry, in the construction of building and installation projects, within the scope of the structure of the buildings and structures of various forms of holes and the nature of the work of the edge, suspension and climbing operations, operating platforms and Three-dimensional cross work, as well as in the structure of the main body outside the site and the channel next to the various types of holes, pits, ditches, grooves and other engineering construction work, as long as it meets the above conditions, are treated as work at height, and be protected.
2, scaffolding, derrick, gantry, construction elevator and a variety of lifting machinery and equipment used in the construction of the formation of the work at height, its safety, are the safety of the project or equipment, respectively, to make provisions to deal with the technical departments.
3, for the operator, when the person falls, the ground may be uneven. The above standard refers to the fall height reference plane, refers to the horizontal plane through the lowest fall landing point. The lowest fall landing point is the lowest point to which a person is likely to fall when in that position. This can be regarded as the maximum fall height. Therefore, the measurement of the height of the work at height, from the operating position to the corresponding fall between the vertical distance between the reference surface of the maximum value shall prevail.
(5) for the conditions of working at height license extended readingThe specific prevention of fall accidents, control, is based on the specific causes of different types of fall accidents, targeted at each type of fall accidents for specific prevention, control points.
1, hole fall accident prevention, control points: prevention of stay mouth, channel mouth, stairway mouth, elevator mouth, loading platform mouth, etc. must be equipped with solid, effective safety protection facilities (cover, fence, safety net); hole protection facilities such as damage must be repaired in a timely manner; hole protection facilities are prohibited to unauthorized displacement, demolition; in the hole next to the operation to be careful, should not be back towards the hole work; do not rest, play around in the hole next to the work; do not Resting, playing or crossing the hole and walking from the hole cover; at the same time, the hole must also be hung with eye-catching warning signs.
2, scaffolding fall accident prevention, control points; according to the provisions of the scaffolding, paving scaffolding boards, no probe boards; protective rails should be tied firmly, hang a good safety net; scaffolding load shall not exceed 270kg/m2; scaffolding away from the wall is too wide should be added to the safety guards; and the implementation of the acceptance of scaffolding and the use of the checking system, and found that the problem is promptly dealt with.
3, suspended high fall accident prevention, control points: strengthen the construction plan and the construction units, each type of work with the use of scaffolding and other safety facilities as much as possible, to avoid or reduce the suspended high work; operators should be doubly careful to avoid over-exertion, the body is unstable; suspended high work must wear soft-soled non-slip shoes, and at the same time, the correct use of safety belts; physical illness or fatigue, mental instability, etc. should not be engaged in suspended high work.
4, roof eaves fall accident prevention, control points: in the roof work personnel should wear soft-soled non-slip shoes; roof slope greater than 25 ° should take anti-skid measures; in the roof work can not be back to the eaves of the move; the use of external scaffolding engineering construction, the outer rows of poles should be higher than the eave 1.2m, and hang a good safety net, the eaves of the outer frame to be full of scaffolding boards; no external scaffolding engineering construction, should be set up under the safety net below the eaves. Safety net should be set up under the eaves.
Ⅵ engaged in aerial work personnel should have what conditions Note
Hanging work enterprises must do a good job of the implementation of the above system of record-keeping and archiving work.
Manufacture of suspended equipment at height enterprises must obtain the appropriate qualifications, products organized by the relevant provincial departments of quality and safety performance appraisal. Safety performance testing of equipment by the provincial production safety supervision and management departments recognized by the safety technology testing organizations.
Suspension equipment and electrical appliances, mechanical safety accessories, safety devices, safety ropes and safety belts and other special labor protective equipment must comply with the relevant national safety standards or industry standards. Suspension equipment should be established unit by unit product and use, inspection, repair, maintenance files.
Suspended from a height using tools, equipment, cables, Hebei Jinlida electric cradle, water pipes, etc. must have reliable fall prevention measures.
Suspension operations must be able to correctly and skillfully use the safety belt and safety rope. The upper end of the safety rope should be fixed firmly and reliably, the use of the safety rope should be basically kept perpendicular to the ground, the operator behind the remaining rope shall not exceed 1 meter. Without special safety measures, it is prohibited for two people to use one safety rope at the same time. Article VIII suspended working site area should ensure the safety of the surrounding environment, the operation of the lower part of the cordon should be set up, and guarded, in a conspicuous place should be set up "prohibited to enter the" signage.
Suspended operations shall not be fog, heavy rain, snow, wind (wind speed of 10.8m/s, equivalent to gusts of 6) and other inclement weather and night operations without lighting. It is not allowed to work up and down in the same vertical direction at the same time. Prohibited to work without special safety protection measures in the area of 10 meters from high voltage lines. Suffering from high blood pressure, heart disease, fear of heights and other people who are not suitable for working at heights shall not be engaged in hanging operations.
Suspended from a height in the case of physical discomfort or safety can not be guaranteed the right to refuse to carry out suspended from a height operation.
Ⅶ How to apply for the certificate of work-at-height
The certificate of work-at-height needs to be examined from the training organization under the Safety Supervision Bureau.
According to the regulations, special operations (including work at height) personnel must go to the local hospital above the county level for a physical examination before attending the training, and only those who have passed the physical examination can participate in the theoretical training and practical training of safety technology corresponding to the special operations they are engaged in.
Training registration need to fill out the "special operators training declaration form", hand in three recent one-inch photo (white or blue background, can not wear red clothes to take pictures), a copy of the ID card, a copy of the certificate of education, and by the unit audit seal. You can then proceed to the aerial work certificate.
(7) for the conditions of aerial work certificate extended reading:
2002, the State Administration of Safety Supervision issued "on the special operators safety technology training and assessment of the work of the views", "suspended from a height operations. Included in the special types of work. Work Safety Law also clearly stipulates that special types of workers must undergo professional training, to obtain a "safety qualification certificate", licensed to work.
The personnel engaged in work at height should insist on carrying out regular safety education and safety technology training, so that it recognizes and grasps the law of falling accidents and the hazards of accidents, and firmly establish the safety of thought and have the ability to prevent and control accidents.
And to do the strict implementation of safety regulations, when they found themselves or others have illegal operation of abnormal behavior, or found with the objects associated with the work of heights and protective measures have an abnormal state, to change in a timely manner so that it meets the safety requirements, so as to prevent and control the fall of accidents occurring.
The People's Republic of China *** and the Central People's *** - State Administration of Work Safety Decree - Special Operators Safety Technology Training and Assessment Management Regulations
Ⅷ How to apply for the company's work-at-height license
Work-at-height license go to The safety supervision bureau to handle.
The license is issued by the Safety Supervision Bureau and is reviewed every three years, and the license needs to be renewed every six years.
The operation license for work at height is a special operation license that must be obtained by the personnel engaged in elevated erection work or installation, maintenance and demolition work at height.
Special operations license:
1, according to the provisions of the special operators in the training must be to the local hospital at or above the county level for a physical examination, medical examination of those who are qualified to participate in the special operations engaged in the corresponding theoretical training and operation of the corresponding safety technology training.
2, training registration to fill out the "special operators training declaration form", submit a one-inch photo three (white or blue background, can not wear red clothes to take pictures), a copy of the ID card, a copy of the certificate of education, and by the unit of audit seal.
Work at height:
refers to specialized or often in the fall height of the reference plane 2 meters and above the possibility of falling to the high place of operation.
Elevated erection work
Refers to the high place engaged in scaffolding, spanning the frame erection or dismantling operations.
Installation, maintenance and removal operations at height
Refers to the installation, maintenance and removal operations at height.
Applicable to the use of special equipment for the internal and external decoration of buildings, cleaning, renovation, power, telecommunications and other line erection, high pipeline erection, small air conditioning installation, maintenance, a variety of equipment and facilities and outdoor advertising facilities installation, overhaul, maintenance, as well as engaged in the demolition of buildings, equipment and facilities at a high level of operation.
(8) for the conditions of aerial work permit extended reading
Duties
"Three" stipulates a clear national supervision and management of production safety, the State Administration of Coal Mine Safety Supervision Bureau of the responsibilities assumed by the State Administration of Production Safety, is the administration of the law, to strengthen the national security Comprehensive supervision of production and coal mine safety supervision work is an important basis. Safety supervision departments at all levels and coal mine safety supervision agencies should seriously study, in accordance with the supervision, supervision duties, find the positioning in the pattern of work safety, further change functions, change ideas, change the way of work, change the work style, establish political awareness, sense of the overall situation, sense of responsibility, and strive to create a new situation in the work of production safety. To implement the "three" provisions as an opportunity to vigorously promote the construction of local production safety supervision bodies at all levels, further improve and perfect the safety supervision system, improve the supervision and enforcement of the authority of the safety supervision work in the full implementation of the *** function.
Coal mine safety as a safety supervision, supervision work in the top priority, in accordance with the "national supervision, local supervision, enterprise responsible for" principle, and effectively implement the responsibility of local coal mine safety supervision at all levels, improve the coal mine safety supervision mechanism, increase supervision and law enforcement efforts, and strive to improve the safety of coal mines, and promote the country's production safety situation stable improvement. The company's goal is to improve the safety of coal mines, and to promote the stabilization of the production safety situation in the country.
Ⅸ Engaged in aerial work need to have what conditions
Engaged in aerial work need to have conditions:
1, aerial work belongs to the special operation, so must be licensed. Special operators must be specialized safety training and assessment of qualified, and obtain the "People's Republic of China **** and the country's special operations license" (hereinafter referred to as the special operations license), before you can go on duty.
2, aerial work of the personnel required to weigh less than 70 kilograms.
3, suffering from fear of heights, high blood pressure, heart disease and other diseases can not be engaged in climbing operations.
4, on the fatigue, mental and emotional depression personnel to stop working at height.
5, forbidden to engage in work at height after drinking.
6, according to the actual need for helmets, safety belts and related labor protection products; not allowed to wear high-heeled shoes, slippers or barefoot work; if it is hanging high work to wear soft-soled non-slip shoes. Not allowed to climb the scaffolding or take the material transportation derrick basket up and down, and not allowed to jump up and down from high places.
7, hanging work enterprises, hanging equipment leasing enterprises, hanging equipment installation and overhaul units, must obtain provincial municipalities or provincial production safety supervision and management departments recognized "Jiangsu Province, hanging work safety qualification certificate" (hereinafter referred to as "safety qualification certificate"), can engage in hanging work and hanging equipment rental, installation and overhaul.
8, operators, equipment installation and maintenance personnel safety training and assessment system.
(9) for the conditions of work-at-height license extended reading:
Matters needing attention when working at height:
1, in order to facilitate the operation of the process of precautionary work, and effectively prevent people and objects from falling from height accidents, according to the characteristics of the construction industry, in the construction of building and installation engineering construction of buildings and The structure of the building within the scope of the various forms of holes and edge of the nature of the work, hanging and climbing operations, operating platforms and three-dimensional cross over operations.
As well as in the structure of the main body of the site and the channel next to the various types of holes, pits, ditches, grooves and other engineering construction work, as long as it meets the above conditions, are treated as work at height, and be protected.
2, scaffolding, derrick, gantry, construction elevator and a variety of lifting machinery and equipment used in the construction of the formation of the work at height, its safety, are the safety of the project or equipment, respectively, to make provisions to deal with the technical departments.
3, for the operator, when the person falls, the ground may be uneven. The above standard refers to the fall height reference plane, refers to the horizontal plane through the lowest fall landing point. The so-called lowest fall landing point is the lowest possible place to fall to when falling in that operating position.
This can be seen as the maximum fall height. Therefore, the height of the work at height is measured as the maximum value of the vertical distance from each work position to the corresponding fall datum.
Ⅹ What items are required for medical examination for the aerial work permit
The aerial work review medical examination items are: ophthalmology (vision, color vision), ophthalmology (ear, nose, and throat), surgery, internal medicine (blood pressure, electrocardiogram, lungs, liver, spleen, and respiratory), and the requirement of no mental illness, epilepsy, vertigo, sudden fainting and other physiological defects, etc. The cost is about several hundred dollars. The cost is about a few hundred dollars.
The operation license for work at height is a special operation license that must be obtained by the personnel engaged in elevated erection work or installation, maintenance and dismantling work at height. The license is issued by the Safety Supervision Bureau, every three years review, every six years need to change the license.
:The so-called work at height refers to people in a certain position for the base of the high place of operation. The national standard GB/T 3608-2008, "Classification of work at height" stipulates that: "Where the fall height reference surface of more than 2m (including 2m) there is a possibility of falling from a high place to carry out the operation, are known as work at height." According to this provision, the scope of work at height involved in the construction industry is quite extensive. When working in a building, if the operation is carried out on a shelf of more than 2m, it is considered as work at height.
Special operators must be specialized safety technology training and assessment of qualified, to obtain the "People's Republic of China **** and the country's special operations operating license" (hereinafter referred to as the special operations operating license), before they can work on the job.