Special Equipment Welding Operator Examination Rules
Chapter I General
Article 1 In order to standardize the special equipment welding operator assessment, according to the "supervision and management of special equipment operators," "Special Equipment Operator Examination Rules," to develop These rules.
Second This rule applies to engage in "special equipment safety supervision regulations" in the boiler, pressure vessel (including cylinders, the same below), pressure piping (hereinafter collectively referred to as pressure equipment) and elevators, cranes, passenger ropeways, large amusement rides, the field (plant) within the motor vehicle (hereinafter collectively referred to as electromechanical equipment) welding operators (hereinafter referred to as welders) of the assessment.
Article 3 engaged in the following weld welding welding work, shall be qualified in accordance with these rules, hold the "special equipment operators license":
(a) pressurized equipment pressure element weld, and pressurized components welded weld, pressurized component surface surfacing of the base material;
(b) electromechanical equipment of the main force structure (parts) parts of the weld, the main force structure (parts) parts welded with the main force Structure (parts) of the weld with the main force;
(c) fused into the first two welds within the position of the weld.
Article IV Provinces, autonomous regions and municipalities directly under the Central Quality and Technical Supervision Department (hereinafter referred to as the provincial quality supervision department) is responsible for determining and publishing the administrative region of the welder test institutions (hereinafter referred to as the examination body) and its commitment to the examination category, the scope of the project, which bears the long-distance transmission (oil and gas) pipelines and non-metallic materials of the welder exam examines the examination body and its examination category, the scope of the project by the provincial quality supervision department after review and report to the State Quality Supervision Department. Quality Supervision Department audit reported to the State General Administration of Quality Supervision, Inspection and Quarantine (hereinafter referred to as AQSIQ) to determine and publish.
Article V examination bodies in the published examination categories, items within the scope of the organization and implementation of the examination. Examination body shall not be mandatory for welders to participate in the organization's training.
Provincial quality supervision departments or authorized municipal quality and technical supervision departments (hereinafter referred to as municipal quality supervision departments), the welder examination supervision, responsible for the approval, certification and review (hereinafter referred to as the licensing authority).
Article VI of the welder examination, including basic knowledge and welding skills test two parts. The content of the examination should be compatible with the scope of the project applied for welders. Basic knowledge test using computerized question-and-answer method, welding skills test using welding test pieces and test assessment method.
Article VII of the following circumstances, the corresponding basic knowledge should be examined:
(a) the first time to apply for the examination;
(b) change the welding method;
(c) change or increase the type of base material (such as steel, aluminum, titanium, etc.);
(d) was revoked, "Special Equipment Operator's License" of the welders to reapply for the examination. .
Article VIII of special equipment metal materials and non-metallic materials welder examination scope, content, methods and results assessment, in accordance with the provisions of Annex A, Annex B of these rules.
By the degree of motorization of the welding method, the welder is divided into manual welding welder, motorized welding welder and automatic welding welder. Motorized welders and automatic welders are collectively referred to as welder operators.
Chapter II examination institutions
Article IX examination institutions should meet the following conditions:
(a) by the legal qualifications of the unit, agency, or organization set up;
(b) there is a permanent organization, management and a fixed place;
(c) welder examination equipment, facilities and welder test categories, projects are appropriate;
(d) full-time staff of not less than three people, the technical ability of the personnel and the welder test category, the project is appropriate;
(e) with the ability to assess the welding process, have to meet the requirements of the welder examination of welding operations guide book, there are different welding methods, different types of materials suitable for the basic knowledge of the examination question bank;
(f) with the welder examination quality assurance system, there are Sound examination room discipline, supervisors and assessors code, confidentiality system and test management, file management, financial management, emergency preparedness and other rules and regulations, and can be effectively implemented;
(VII) Welding test implementation of computer and video management.
The basic conditions of the examination organization's personnel, equipment, venues, etc. are shown in Table 1.
Table-1 Basic conditions of the welder examination organization
............... .........
Note 1; the qualifications and number of personnel, equipment, etc. in Table 1 are the minimum requirements (the same below).
Note 2; The director or deputy director may also be the technical head.
Note 3; Equipment and facilities cannot be rented or borrowed.
Article 10 of the examination body in charge of technology and welding skills teachers should be familiar with the content of these rules and welding expertise. Welding skills teachers also need to carry out welding skills test, the test can be qualified to assume the appropriate position.
The examination body of technical personnel and welding skills teacher's assessment, in accordance with the provisions of Article IV of the rules of authority, by the State Administration of Quality Supervision or the provincial quality supervision departments designated by the examination body to organize and implement.
Article XI of the test organization's welding skills teachers hold the project, the test organization to undertake the project scope of the welder's test. Welding operation skills teachers during their tenure, can be regarded as engaged in special equipment welding operations.
Article XII of the main responsibilities of the welder examination institutions are as follows:
(a) the development of welder test plan and announced to the community;
(b) review of welder test application information;
(c) to determine the basic knowledge of the examination paper and operational skills test pieces;
(d) preparation of test panels (tubes), welding consumables, equipment and facilities;
(e) the preparation of test panels (tubes), welding materials, equipment and facilities;
(f) the main responsibilities of the welder examination institutions. Facilities;
(e) organization and implementation of the basic knowledge of welding computer test and welding operational skills test, responsible for the evaluation of the test paper and test pieces, test samples of the test, assessment of test scores;
(f) announcement, notification and reporting of the results of the examination;
(g) establishment and management of welding test files;
(h) according to the applicant's entrusted to the licensing authorities Unified application for "special equipment operator card";
(ix) according to the applicant's commission to the licensing authority to apply for a unified application for "special equipment operator card" review;
(j) to the licensing authority to submit an annual summary of the work and examination-related statistical reports, and in accordance with the requirements of the information technology of special equipment, timely input of relevant information into the special equipment personnel database.
Article XIII of the examination body if the test category, project scope of change, should be submitted to the State Administration of Quality Supervision or provincial quality supervision departments to apply, after approval and announcement, only in accordance with the newly approved test category, project scope of the organization and implementation of the welder's test.
Article XIV of the statutory qualifications of the examination body, address, nature of the institution, affiliation, and the director (or deputy director), technical personnel and welding skills teachers change, should be within 15 days to the State Administration of Quality Supervision or the provincial quality supervision departments for the record, and report the municipal quality supervision departments.
Article XV of the municipal quality supervision department is responsible for the administrative jurisdiction of the welder test supervision and inspection, from time to time on-site supervision of the welder test process, at least once a year, and will be supervised and inspected the results reported to the higher level of quality supervision department.
Supervision and inspection of the following:
(a) the qualifications of the examining body, resource conditions and test categories, project scope;
(b) welder test application information;
(c) welder test quality assurance system establishment and implementation;
(d) welder test with welding process evaluation and welding instructions and Basic knowledge examination questions;
(v) examination organizations and welding operation skills teacher's practical ability.
Chapter III examination procedures and requirements
Article XVI of the welder examination procedures, including examination registration, application information review, examination, examination results assessment and notification.
Article XVII of the welder to apply for the welder's examination, should be submitted to the examination body the following information:
(a) "special equipment welding operator examination application form" (see Annex C, 1);
(b) Resident Identity Card (a copy of a copy of a copy of a copy of a copy of a copy of a copy of a copy of a copy of a copy of a copy of a copy of a copy of a copy of a resident's identity card)
(c) front recent photographs without a crown (1-inch, 2 pieces);
(d) graduation certificate of junior high school or above (including junior high school) (copy) or proof of equivalent education (1 copy);
(e) physical health certificate containing vision, color blindness, etc. issued by medical and health institutions.
"Special Equipment Welding Operator Examination Application Form" by the employer or training organization to sign the opinion, and to clarify the applicant after safety education and training content and hours.
Article XVIII of the examination organization shall receive the application information within 15 working days to complete the review. To meet the requirements, notify the applicant to take the test; does not meet the requirements, notify the applicant to correct the information in a timely manner or explain the reasons for not meeting the requirements.
Article 19 of the examination body in the examination 30 days before the announcement of the basic knowledge of welders and welding skills test project, time and location, and notify the applicant and the examination body of the location of the quality supervision department.
The organization of the examination should be strictly enforced confidentiality, supervision and other rules and regulations to ensure that the examination is open, just, fair and standardized to ensure the quality of the examination work.
Article 20 of the examination organization shall, within 20 working days after the end of the examination, complete the evaluation of examination results. Basic knowledge of welders and welding skills test results should be recorded in the "special equipment welding operator test basic situation table" (see Annex D), welding skills test pieces of test records should be recorded in the "metal welding skills test inspection record sheet" and "non-metallic materials welding skills test inspection record sheet (PE)" (see Annex E and Annex F, hereinafter collectively referred to as welding) (see Annex E and Annex F, hereinafter collectively referred to as the welding skills test inspection record sheet).
Article 21 The results of the welder's examination reported to the licensing authority and notify the registered welder. Basic knowledge test and welding skills test welders, by the examining body to summarize the welder's registration information, test information (including Annex C, Annex D, test pieces, Annex E or Annex F) to the licensing authority to apply for a unified application for the "special equipment operators license", you can also apply to the licensing authority by the individual welder for the application.
Article 22 of the examination registration data and examination data, archived by the examination organization, kept for at least four years.
Article 23 The licensed welder shall, in accordance with the provisions of these rules, to undertake welding work with qualified projects corresponding to special equipment.
"Special Equipment Operator's Certificate" is equally valid throughout the country.
Article 24 "special equipment operators license" every four years for review.
The first time a qualified project in the first review, you need to re-examine; after the second (including the second) review, you can be sampled within the scope of qualified projects.
Article 25 of the licensed welders should be in the period before the expiration of three months, the review of the application information submitted to the original examination agency, commissioned by the examination agency unified to the licensing authority to apply for a review; welders can also apply for a review of the individual application information submitted directly to the original licensing authority, apply for a review.
The welder who works across the region can apply for review to the licensing authority where the work is done.
Article 26 When applying for review, the licensed welder shall submit the following information:
(a) "Special Equipment Welding Operator Re-examination Application Form" (see Annex G, 1);
(b) "Special Equipment Operator's License" (the original);
(c) "Welding Operator's Welding Performance Record Sheet for Special Equipment Welding" (see Annex H, 1) ;
(d) "special equipment welding operator examination of the basic situation table" (see Annex D, 1);
(e) welding operation skills test inspection record sheet (for re-examination or sampling of welders, 1);
(f) medical institutions containing visual acuity, color blindness, etc., issued by the physical health certificate (original).
"Special Equipment Welding Operator Review Application Form" by the employer of welders (hereinafter referred to as the employer) or the training institution to sign an opinion, specifying the applicant after the content and hours of safety education and training, with or without violations, violations, and other adverse records.
Article 27 review, meet all of the following requirements for a qualified review:
(a) the application for review of the information submitted is true and complete;
(b) the age of not more than 55 years old (more than 55 years of age, in accordance with the requirements of Article 29 of these Rules);
(c) no violation of process discipline resulting in major quality accidents;
(d) re-examination of the program or in accordance with the Rules Annex A, A8, Annex B, B7 sampling test qualified program.
Article 28 The licensing authority shall review the review information within five working days, or inform the applicant to correct the application information, and make a decision on whether to accept. Can be reviewed on the spot, shall be handled on the spot.
Agreed to accept the application for review, the issuing authority shall complete the review within 20 working days. Qualified, registered in the certificate of the original review of the examination passed the project and signed; unqualified, shall state the reasons in writing.
Article 29 of the licensed manual welder or welder operator of a welding method to interrupt the welding operation of special equipment for more than six months, the manual welder or welder operator if you use the welding method for special equipment before the welding operation should be reviewed and sampling.
Age over 55 years old welder, need to continue to engage in special equipment welding operations, depending on the situation by the licensing authority to decide whether the need for examination.
Article 30 The overdue application for review, review failed, its "special equipment operator license" is invalid, by the licensing authority to be canceled and announced.
Article 31 In any of the following cases, the original licensing authority may suspend or revoke its "special equipment operator license":
(a) cheating on the examination or other deceptive means to obtain the "special equipment operator license";
(b) violation of the operation of the special equipment caused by accidents;
(a) the examination body or licensing authority Staff abuse of power, dereliction of duty, violation of legal procedures or beyond the scope of the examination and issuance of certificates.
Article 32 of the examination cheating or other deceptive way to obtain "special equipment operators license" of the welder, the revocation of the certificate shall not be re-examined within three years after the application for welding.
Article 33 The welder and the signing of the opinion of the employer or training institution shall be responsible for the authenticity of the contents of the "special equipment welding operator examination application form", "special equipment welding operator review application form".
The examining body shall apply for the welder to test the completeness of the information and "special equipment welding operator test basic situation table", "metal materials welding skills test inspection record sheet", "non-metallic materials welding skills test inspection record sheet (PE)" is responsible for the authenticity of.
The licensing authority shall be responsible for the welder's examination procedures and review conclusions.
Article 34 of the examination body can be in accordance with the requirements of special equipment information technology, and actively create conditions for the establishment of online registration platform, the implementation of online registration. Issuing authority shall issue "special equipment operator license" of the relevant data into the AQSIQ special equipment operator publicity system.
Chapter IV Supplementary Provisions
Article 35 The employer shall, in accordance with the provisions of these rules, combined with the actual situation of the unit, the development of welder management, the establishment of welder welding files. Welder welding file should include welder welding performance, weld quality summary results, welding quality accidents and other content, and for the welder's certification and review to provide objective and true evidence of information.
Welder after the termination of the employment relationship, the original employer is responsible for the licensing authority to provide welder welding file information.
Article 36 meets the following conditions of the welder test scope, content, methods and results of the assessment standards, by the employer in accordance with the product design and manufacture of technical conditions, with reference to domestic and foreign relevant standards developed. If necessary, the organization's experts to review, and reported to the licensing authority for the record other requirements are still implemented in accordance with these rules:
(a) welding methods other than those stipulated in these rules (such as brazing), material type (such as medium carbon steel, tin bronze, zirconium and zirconium alloys), filler material type and the form of the weld (such as wear-resistant layer of overlays, end joining weld, groove and plug weld);
(b) (2) ) electromechanical equipment using materials beyond the scope of the domestic design specifications, or the use of low alloy steel with a lower limit of standard tensile strength greater than 610Mpa.
Article 37 of the welder with "special equipment operators license" by the State Administration of Quality Supervision, Inspection and Quarantine unified printing.
In accordance with the "supervision and management of special equipment operators," the provisions of the special equipment welding operations are divided into "pressure welding" (refers to the welding of pressure equipment) and "structural welding" (refers to the welding of electromechanical equipment), "special equipment operator certificate" welder examination passed the project. Project must be divided into "pressure welding" or "structural welding"; when the "special equipment operator license" to include both "pressure welding, structural welding", then its "Type of work" column "special equipment welding operations" followed by "(pressure welding, structural welding)", and in the approved project page to fill in the qualified project code before the indication of "Pressure welding" or "structural welding" (respectively, with the code "Y" and "J");
< p>(b) if the structural welder welder examination has special needs, "special equipment operator certificate" does not include "(pressure welding)", then its "type of operation" column "special equipment welding operations " after "(structural welding)", in the approved project page directly fill in the qualified project code.(c) If there is no special need for structural welding welder's examination, "Special Equipment Operator's Certificate" in the "type of work" column "special equipment welding operations" plus "(pressure welding, structural welding) ", and in the approved project page directly fill in the qualified project code, do not have to indicate" pressure welding "or" structural welding ".
Article 38 These rules by the AQSIQ is responsible for interpretation.
Article 39 These rules shall come into force on February 1, 2011, April 18, 2002 AQSIQ promulgated the "boiler pressure vessel pressure pipeline welder test and management rules" (pot quality inspection pot [2002] No. 109), October 27, 2006 "gas with polyethylene pipeline welding technology rules" in the organization of the examination of the relevant welder, the examination and management Relevant requirements are repealed at the same time.
........................
To the full text can be on the Internet, if you can not find, give the address I send you. If you can't find it, give me the address and I'll send it to you.