Do special equipment maintenance need qualification?

Special equipment maintenance needs qualified units. The installation, modification and maintenance of special equipment shall be subject to the national compulsory licensing system. Generally, the special equipment we refer to in our daily life is stipulated in the Regulations on Safety Supervision of Special Equipment issued by the State Council. The special equipment mentioned in the regulations refers to boilers, pressure vessels (including gas cylinders), pressure pipes, elevators, lifting machinery, passenger ropeways and large-scale amusement facilities that are life-threatening and dangerous.

A, special equipment maintenance qualification how to deal with:

1, construction scheme;

2. Installation contract signed with users;

3, special equipment installation, renovation and maintenance notice (in quadruplicate);

4, special equipment design and manufacturing materials (original);

5. Certificate of special equipment operator of the installer (original).

Second, the special equipment operation procedures:

1. Before the equipment is operated, do all kinds of pre-operation inspections, including: power supply voltage, switch state, safety protection device and on-site operating environment. If any abnormality is found, it shall be handled in time, and it is forbidden to run the equipment forcibly without inspection.

2. When the equipment is running, record the operation records in strict accordance with the regulations, check the running status of the equipment, and conduct necessary tests as required; According to the economic and practical working principle, the equipment is adjusted to the best working state to reduce the energy consumption of the equipment.

3. When the equipment fails, stop running immediately, report to the competent leader immediately at the same time, and troubleshoot or repair as soon as possible to ensure normal operation. It is forbidden to operate the equipment in a fault state.

4. When the equipment stops running due to the action of the equipment safety protection device. The corresponding fault treatment should be carried out according to the fault display. If it is difficult to handle for a while, while reporting to the leader, organize professional and technical personnel to investigate the fault and repair the faulty equipment according to the investigation results. It is forbidden to force power transmission operation under the condition of unclear fault.

5. When the equipment emergency may endanger personal safety, the operator should leave the operation site immediately after taking necessary control measures to prevent casualties.

Legal basis: Article 18 of the Law of the People's Republic of China on the Safety of Special Equipment, the state implements a licensing system for the production of special equipment according to the principle of classified supervision and management. The production unit of special equipment shall meet the following conditions, and may engage in production activities only after being approved by the department in charge of safety supervision and management of special equipment:

(1) Having professional and technical personnel suitable for production;

(2) Having equipment, facilities and workplaces suitable for production;

(three) a sound quality assurance, safety management and post responsibility system.