Spunlace production line water treatment system equipment how to maintain

The sewage treatment plant of the various equipment are in constant operation every day, in order to ensure the normal operation of the various treatment devices and to maintain good treatment results, should be regularly on a variety of equipment for maintenance and overhaul. In addition to the electrical part of the electrician is responsible for, the rest of the work is carried out by the operator, maintenance personnel to assist and guide. For the daily maintenance of water treatment equipment can start from the following aspects:

1, check whether the safety guards are complete, safe, flexible, accurate and reliable.

2, check the screws and fastening treatment, in order to prevent the use of shedding; check the transmission system of each operating handle, electrical switch position correctly without loosening.

3, check whether the lubrication device is complete, intact, reliable, smooth oil, oil labeling, lubrication and refueling of various transmission parts.

4, check all kinds of pipeline, pipe fittings are intact, no running, bubbling, dripping, leaking, seepage phenomenon.

5, check the integrity of the equipment and parts, accessories are missing, a variety of tools, accessories should be placed neatly, stored in an orderly manner.

6, clean all parts of the equipment, so that the equipment inside and outside clean, sliding rails and joints should be free of oil, rust, dust and debris, so that the paint to see the color, iron to see the light.

7, the operating position should be "a flat", "two clean", "three see", "four no ", which:" a flat "that is, around the workshop leveling;" two clean "that is, glass, windows and doors, ground channel net;" three see "that is, the shaft to see the light, Ditch see the bottom, equipment see the color; "four no" that is, no oil, water, debris, garbage.